Monport 60W JPT & MOPA Fiber Laser Engraver (Model GM60) User Manual

1. Proizvod je gotovview

The Monport 60W JPT & MOPA Fiber Laser Engraver (Model GM60) is a compact and powerful laser marking machine designed for precision engraving and cutting on various materials. It features a JPT MOPA laser source, enabling true color marking and deep engraving capabilities. The system is equipped with a customized galvanometer for high speed and accuracy.

Ključne karakteristike:

• Integrirani dizajn: Smaller footprint and lighter weight while maintaining high performance.
• Velika brzina i tačnost: Max marking speed of 10,000mm/s and carving accuracy of 0.01mm.
• Optimal Marking Area: A 175x175mm marking area is optimized for consistent engraving quality.
• True Color Marking: JPT MOPA laser allows for color marking on stainless steel, brass, and aluminum blackening.
• Deep Engraving & Cutting: Capable of 2.5D and deep metal engraving, and some metal sheet cutting.
• Dug životni vek: Laser source designed for up to 100,000 hours of operation.
• Kompatibilnost softvera: Supports BSLcad and LightBurn.

Slika 1.1: Gotovoview of the Monport 60W JPT & MOPA Fiber Laser Engraver.

2. Sigurnosne smjernice

Operating a fiber laser engraver involves potential hazards. Adhere to all safety precautions to prevent injury and damage to the equipment. This section outlines general safety practices; always refer to local regulations and specific safety instructions provided with the machine.

Opće sigurnosne mjere:

• Zaštita očiju: Always wear certified laser safety glasses appropriate for the laser's wavelength (1064nm for fiber lasers) when the machine is in operation.
• Zaštita kože: Izbjegavajte direktno izlaganje kože laserskom snopu.
• ventilacija: Ensure adequate ventilation or use a fume extractor to remove fumes and particles generated during engraving, especially when working with materials like leather or certain plastics.
• Protivpožarna sigurnost: Keep a fire extinguisher nearby. Do not engrave highly flammable materials without proper precautions.
• električna sigurnost: Ensure the machine is properly grounded and connected to a stable power supply. Do not operate with wet hands or in damp okruženja.
• Radna oblast: Keep the work area clear of clutter and unauthorized personnel. Consider using a protection enclosure.
• Hitno zaustavljanje: Upoznajte se s lokacijom i radom dugmeta za hitno zaustavljanje.
• Kompatibilnost materijala: Only engrave materials known to be safe for fiber lasers. Avoid materials that produce toxic fumes or reflect the laser beam dangerously.

3. Sadržaj paketa

Upon unpacking, verify that all items listed below are present and undamaged. If any components are missing or damaged, contact Monport customer support immediately.

• GM 60 Fiber Laser Engraver Unit
• Power Cable
• USB kabel
• Laserske zaštitne naočare
• Focusing Ruler/Gauge
• Software Installation Media (or download instructions)
• Korisnički priručnik (ovaj dokument)

4. Upute za postavljanje

4.1 Raspakivanje i postavljanje

1. Carefully remove the laser engraver and all accessories from the packaging.
2. Place the engraver on a stable, level surface in a well-ventilated area. Ensure sufficient space around the machine for operation and maintenance.
3. Note the machine's dimensions: approximately 370mm (width) x 300mm (depth) x 550mm (height).

Image 4.1: The Monport 60W Fiber Laser Engraver with approximate dimensions.

4.2 Povezivanje mašine

1. Connect the power cable to the engraver's power input and then to a grounded electrical outlet.
2. Connect the USB cable from the engraver to your computer. If experiencing connectivity issues, try routing the USB through a powered port or using an adapter for USB-C to standard USB.
3. Uvjerite se da su sve veze sigurne.

4.3 Instalacija softvera

The Monport GM60 supports BSLcad and LightBurn software. Refer to the provided software installation guide for detailed instructions.

1. Insert the software installation media or download the latest version of BSLcad or LightBurn from the official Monport website.
2. Follow the on-screen prompts to install the software and necessary drivers.
3. Launch the software and configure the machine settings according to the software's documentation.

5. Uputstvo za upotrebu

5.1 Uključivanje i početne provjere

1. Ensure all safety precautions are in place, including wearing laser safety glasses.
2. Turn on the main power switch on the engraver.
3. Launch the engraving software (BSLcad or LightBurn) on your computer.

5.2 Priprema i postavljanje materijala

1. Select a suitable material for engraving (e.g., metal, leather, certain plastics).
2. Place the material securely within the 175x175mm marking area on the work platform.
3. Use the red dot pointer and the focusing ruler to set the correct focal distance for your material. Adjust the Z-axis (laser head height) until the red dots converge or the ruler indicates optimal focus.

5.3 Proces graviranja

1. Uvoz dizajna: Import or create your design within the engraving software.
2. Postavke parametara: Adjust laser parameters such as power, speed, frequency, and pulse width based on the material and desired effect. Monport provides reference parameters for various materials and color marking.
3. Preview: Koristite softverske preduvjeteview function to ensure the design is correctly positioned on the material.
4. Započni graviranje: Initiate the engraving process from the software. Monitor the process closely.

Image 5.1: Illustration of the laser's precision, capable of 0.01mm accuracy.

5.4 Advanced Engraving Techniques

• Color Marking: Utilize the JPT MOPA laser's adjustable frequency (1-4000kHz) and pulse width (2-500ns) to achieve various colors on metals like stainless steel and brass. Experiment with parameters to achieve desired hues.
• Deep Engraving & 2.5D Engraving: For deeper marks or 2.5D effects, adjust power and multiple passes. Higher power generally enhances deep engraving and cutting capabilities.
• Rotacijska osa (opciono): If using an optional rotary axis, refer to its specific manual for setup and operation with cylindrical objects.

Slika 5.2: Primjeramples of materials compatible with the Monport fiber laser, including color marking capabilities.

6. Održavanje i njega

Regular maintenance ensures optimal performance and extends the lifespan of your Monport fiber laser engraver.

6.1 Čišćenje

• Čišćenje sočiva: The F-theta field mirror and protective lens should be cleaned regularly with specialized lens cleaning solution and wipes to prevent dust and debris from affecting laser quality.
• Radna oblast: Radnu platformu i okolno područje održavajte čistim od otpadaka i prašine.
• Eksterijer: Wipe down the exterior of the machine with a soft, dry cloth.

6.2 Opće održavanje

• Inspekcija kablova: Periodically check all cables for signs of wear or damage.
• Ažuriranja softvera: Keep your engraving software updated to the latest version for performance improvements and new features.
• Uslovi okoline: Operate the machine in a stable environment, avoiding extreme temperatures or humidity.

7. Otkrivanje problema

This section addresses common issues you might encounter. For problems not listed here, contact Monport customer support.

8. Tehničke specifikacije

9. Podrška korisnicima i garancija

Monport is committed to providing excellent customer service. If you encounter any issues or have questions regarding your Monport 60W JPT & MOPA Fiber Laser Engraver, please contact our support team.

Kontakt informacije:

• Webstranica: Visit the official Monport webstranica za resurse podrške, često postavljana pitanja i kontakt podatke.
• Email: Refer to your purchase documentation for the dedicated support email address.
• Telefon: Check the Monport webstranica za brojeve telefona korisničke službe.

Informacije o garanciji:

Your Monport 60W JPT & MOPA Fiber Laser Engraver is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or the official Monport webstranicu za detaljne uslove i odredbe, uključujući trajanje garancije i pokrivenost.