Dasqua 4710-1205 Set od 7 elektronskih dubinomjera od 0-16 inča - Korisnički priručnik

1. Uvod

This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.

Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.

2. Sadržaj paketa

Provjerite da li su sve komponente prisutne u paketu:

• Electronic Depth Gage Unit
• Set of Measurement Rods (7 pieces)
• Torbica za pohranu
• Garantno pismo

Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.

3. Ključne karakteristike

• rezolucija: 0.0005-inch / 0.01mm for precise measurements.
• Usklađenost sa standardima: Manufactured in accordance with DIN863 standards.
• vreteno: Hardened, ground, and lapped for enhanced accuracy.
• Svestranost: Designed to accommodate a broad range of measurement applications.
• Prikaz: Large, digital display for clear and quick readings.
• Izgradnja: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
• Poništavanje na nulu: Ability to reset to zero at any position for comparative depth measurements.

4. Upute za postavljanje

4.1. Instalacija baterije

The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:

1. Locate the battery compartment cover on the back of the digital display unit.
2. Use a small screwdriver or coin to open the cover.
3. Umetnite novu CR2032 bateriju tako da pozitivna (+) strana bude okrenuta prema gore.
4. Vratite sigurno poklopac odeljka za baterije.

4.2. Attaching Measurement Rods

Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.

1. Identify the threaded end of the measurement rod.
2. Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
3. Ensure the rod is securely attached and straight.

Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.

Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.

5. Uputstvo za upotrebu

5.1. Uključivanje/isključivanje

• Pritisnite ON/OFF dugme za uključivanje uređaja.
• Pritisnite ON/OFF ponovo pritisnite dugme da biste isključili uređaj.

5.2. Unit Conversion (Inch/Millimeter)

• Pritisnite mm/in button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.

5.3. Podešavanje nule

The zero-reset function allows for comparative measurements or setting a reference point.

1. Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
2. Pritisnite NULA dugme. Na ekranu će se prikazati '0.000' ili '0.00'.

5.4. Mjerenje

1. Ensure the depth gage is zeroed on a reference surface.
2. Place the base of the depth gage firmly on the surface from which the depth is to be measured.
3. Lower the measurement rod into the hole or recess until its tip contacts the bottom.
4. Očitajte mjerenje direktno s digitalnog displeja.

5.5. Funkcija čekanja

• Pritisnite HOLD dugme za zamrzavanje trenutnog očitavanja na ekranu.
• Pritisnite HOLD ponovo pritisnite dugme da biste otpustili očitanje i vratili se na mjerenje uživo.

Slika 5.1: Detaljno view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.

6. Održavanje

6.1. Čišćenje

• Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
• Za tvrdokornu prljavštinu koristite krpu laganoampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
• Ensure no liquid enters the electronic components.

6.2. Skladištenje

• Store the depth gage in its protective case when not in use.
• Keep the device in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
• Ako skladištite duži period, izvadite bateriju kako biste spriječili curenje.

6.3. Zamjena baterije

Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.

7. Otkrivanje problema

• Ekran je prazan ili taman:
  Check battery installation. Replace the battery if necessary. Ensure the device is powered on.
• Netačna očitanja:
  Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached.
• Dugmad ne reagiraju:
  Provjerite nivo napunjenosti baterije. Ako problem i dalje postoji nakon zamjene baterije, obratite se korisničkoj podršci.

8. Specifikacije proizvoda

Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.

9. Garancija i podrška

This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official webstranica ili kanali za korisničku podršku.