1. Uvod i krajview
The Telwin Drive 1800 Kompressor is a compact, multi-functional 12V lithium emergency starter designed for various vehicles including motorcycles, cars, campers, marine engines, and vans. This device integrates an air compressor for tire inflation, a power bank for electronic device charging, and a high-intensity LED light. It utilizes high-efficiency LiPo lithium batteries for quick and complete charging, ensuring a compact and lightweight design. This manual provides essential information for the safe and effective use of your device.
2. Sigurnosne informacije
Pročitajte sva sigurnosna upozorenja i upute prije korištenja ovog proizvoda. Nepoštivanje ovih uputa može dovesti do strujnog udara, požara i/ili ozbiljnih povreda.
- Zaštita očiju: Uvijek nosite zaštitu za oči pri radu s baterijama.
- ventilacija: Ensure adequate ventilation when charging or jump-starting to prevent accumulation of explosive gases.
- Akumulatorska kiselina: Battery acid is corrosive. If contact occurs, flush immediately with water and seek medical attention.
- Sparks and Flames: Keep sparks, flames, and smoking materials away from the battery and jump starter.
- Frozen Batteries: Nikada ne pokušavajte da pokrenete zamrznutu bateriju.
- djeca: Držite uređaj van domašaja djece.
- Prekomjerna inflacija: Do not over-inflate tires or other items. Follow manufacturer's recommended pressure.
- toplina: The compressor and hose may become hot during prolonged use. Allow to cool before handling.
- Punjenje: Use only the provided charging cable. Do not expose the device to rain or wet conditions.
3. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- Telwin Drive 1800 Kompressor Unit
- Starting Cables (Jump Start Clamps)
- USB-C kabl za punjenje
- Removable Air Hose
- 3 mlaznice za naduvavanje
- Torbica za pohranu
Figure 3.1: Included accessories for the Telwin Drive 1800 Kompressor.
4. Karakteristike i komponente proizvoda
Familiarize yourself with the main components of your Telwin Drive 1800 Kompressor.
Slika 4.1: Prednja strana view of the Telwin Drive 1800 Kompressor.
Slika 4.2: Pozadi view with charging and output ports.
Slika 4.3: Detaljno view kontrolne table.
- LCD ekran: Shows inflation modes, pressure readings, and battery status.
- Kontrolna dugmad: Power, mode selection, pressure adjustment (+/-), and LED light activation.
- Port za pokretanje: For connecting the jump start cables.
- USB-A Output (OUT: 5V==2.4A): Za punjenje elektronskih uređaja.
- USB-C Input (IN: 5V==2A): For charging the Telwin Drive 1800 Kompressor unit.
- Priključak crijeva za zrak: For attaching the removable air hose.
- LED svjetlo: High-intensity light with multiple operating modes.
5. Podešavanje
5.1 Početno punjenje
Before first use, fully charge the Telwin Drive 1800 Kompressor. Connect the provided USB-C charging cable to the USB-C input port on the device and to a suitable USB power adapter (not included). The LCD display will indicate charging status. Charging time may vary.
5.2 Pričvršćivanje crijeva za zrak
To use the compressor function, securely screw the removable air hose into the designated port on the device. Ensure a tight connection to prevent air leakage.
6. Uputstvo za upotrebu
6.1 Pokretanje vozila skokom
- Ensure the Telwin Drive 1800 Kompressor is sufficiently charged.
- Isključite paljenje vozila i svu dodatnu opremu.
- Povežite RED pozitivan (+) clamp na pozitivni (+) pol akumulatora vozila.
- Povežite BLACK negativni (-) clamp to a metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect directly to the negative battery terminal unless specified by the vehicle manufacturer.
- Osigurajte clamps are securely attached and do not touch each other.
- Turn on the Telwin Drive 1800 Kompressor.
- Pokrenite vozilo. Ako se ne pokrene odmah, pričekajte 30 sekundi i pokušajte ponovo. Nemojte paliti duže od 3 sekundi po pokušaju.
- Čim se vozilo pokrene, odmah isključite BLACK negativni (-) clamp prvo, a zatim RED pozitivan (+) clamp.
Figure 6.1: Jump starting a vehicle using the Telwin Drive 1800 Kompressor.
6.2 Korištenje zračnog kompresora
- Ensure the air hose is securely attached to the device.
- Select the appropriate inflation nozzle and attach it to the air hose.
- Connect the nozzle to the item to be inflated (e.g., tire valve).
- Turn on the Telwin Drive 1800 Kompressor.
- Use the mode button to select the desired inflation mode (car, SUV, bicycle, inflatables, custom).
- Use the +/- buttons to set the target pressure. The LCD display will show the current and target pressure.
- Press the power button to start inflation. The compressor will automatically stop when the target pressure is reached.
- Disconnect the nozzle and air hose.
Figure 6.2: Inflating a car tire with the integrated compressor.
6.3 Korištenje kao Power Bank
To charge electronic devices, connect your device's USB charging cable to the USB-A output port (OUT: 5V==2.4A) on the Telwin Drive 1800 Kompressor. The device will automatically begin charging.
6.4 Korištenje LED svjetla
Press the dedicated light button on the control panel to cycle through the LED light modes:
- Fiksno svjetlo: Za opšte osvjetljenje.
- Strobe svjetlo: Za signaliziranje ili privlačenje pažnje.
- S.O.S. Mode: Flashes the international S.O.S. signal.
Figure 6.3: The LED light in operation.
7. Održavanje
- Punjenje: For optimal battery life, recharge the device every 3-6 months, even if not in use.
- čišćenje: Wipe the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasives.
- Skladištenje: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
- Filter zraka: Periodically check the air intake vents for dust or debris and clean if necessary to maintain compressor efficiency.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uređaj se ne uključuje. | Baterija je prazna. | Potpuno napunite uređaj pomoću USB-C kabla. |
| Vozilo se ne pokreće pomoću kablova. | Netačan clamp connection; vehicle battery too deeply discharged; device battery too low. | Provjerite clamp connections (red to +, black to chassis); ensure device is fully charged; consult vehicle manual. |
| Compressor not inflating. | Air hose not securely attached; nozzle not properly connected; target pressure not set. | Check all connections; ensure nozzle is firmly attached; set target pressure on the display. |
| LED svjetlo ne radi. | Device battery is depleted; light button not pressed correctly. | Charge the device; press the light button firmly to cycle modes. |
9. Specifikacije
- Model: Drive 1800 Kompressor
- Proizvođač: Telwin
- Težina artikla: 2 kilograma
- Dimenzije paketa: 25.8 x 12.7 x 11 cm
- Broj modela: 829575
- Max Amperage: 1800 A
- Voltage: 12 Volts
- Sastav baterije: Lithium-ion (LiPo)
- Compressor Max Pressure: Do 3.5 bara
- USB-A izlaz: 5V == 2.4A
- USB-C ulaz: 5V == 2A
10. Garancija i podrška
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Telwin webSačuvajte dokaz o kupovini za slučaj reklamacije.
