1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of the CISA 604 Series Door Closer. Designed for effective and reliable door closure, this model is suitable for doors weighing up to 85 kg and up to 1100 mm wide. Please read these instructions carefully before installation and use to ensure proper function and safety.
Image 1.1: The CISA 604 Series Door Closer in dark brown finish, showing the main body and articulated arm.
2. Sigurnosne informacije
- Ensure all installation steps are followed precisely to prevent injury or damage to the door closer or door.
- Ne pokušavajte modificirati zatvarač vrata. Neovlaštene modifikacije mogu ugroziti sigurnost i performanse.
- Držite ruke i prste dalje od pokretnih dijelova tokom rada i podešavanja.
- This product is designed for doors up to 85 kg and 1100 mm wide. Using it on heavier or wider doors may result in malfunction or damage.
- Uvijek koristite odgovarajući alat i ličnu zaštitnu opremu tokom instalacije.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- CISA 604 Series Door Closer Unit
- Articulated Arm Assembly
- Fixing Screws (various sizes for different mounting surfaces)
- Predložak za montažu
- Uputstvo (ovaj dokument)
4. Podešavanje (Instalacija)
The CISA 604 Series Door Closer can be surface-mounted on left or right-hand doors, for both pull-side and push-side applications. Refer to the included mounting template for precise hole drilling.
4.1. Koraci prije instalacije
- Determine the door's swing direction (left or right) and whether the closer will be mounted on the pull side (hinge side) or push side (opposite hinge side).
- Clean the mounting surface on the door and frame.
- Position the mounting template according to your chosen installation type and mark the drilling points accurately.
4.2. Mounting the Closer Body
- Izbušite pilot rupe na označenim pozicijama.
- Secure the main body of the door closer to the door frame or door using the provided fixing screws. Ensure it is level and firmly attached.
4.3. Installing the Arm Assembly
- Attach the main arm to the closer's spindle.
- Attach the forearm to the door frame or door, ensuring the correct angle as indicated in the template for optimal operation.
- Connect the main arm and forearm using the connecting screw.
Image 4.1: Detailed technical drawing of the CISA 604 Series Door Closer, illustrating dimensions and mounting hole positions for accurate installation.
5. Upute za upotrebu (Podešavanja)
The CISA 604 Series Door Closer features independent adjustments for closing speed and final strike, allowing precise control over door movement.
5.1. Adjusting Closing Speed
The closing speed is regulated by a valve located on the side of the closer body. This valve controls the speed of the door from its fully open position until approximately 15 degrees from the closed position.
- To povećanje closing speed, turn the adjustment screw clockwise (usually marked 'S' or '1').
- To smanjiti closing speed, turn the adjustment screw counter-clockwise.
5.2. Adjusting Final Strike (Latching Speed)
The final strike, or latching speed, controls the door's speed for the last 15 degrees of closure, ensuring it latches securely without slamming. This is regulated by a separate valve.
- To povećanje latching speed, turn the adjustment screw clockwise (usually marked 'L' or '2').
- To smanjiti latching speed, turn the adjustment screw counter-clockwise.
Make small adjustments and test the door's closing action after each adjustment. Avoid over-tightening the screws.
Image 5.1: Diagram showing the two adjustment sectors: the green sector for overall closing speed (up to 80 degrees) and the red sector for final strike speed (the last 15 degrees).
6. Održavanje
The CISA 604 Series Door Closer is designed for minimal maintenance. However, periodic checks can ensure its longevity and optimal performance.
- Godišnja inspekcija: Check all mounting screws for tightness. Re-tighten if necessary.
- sklop ruke: Inspect the articulated arm for any signs of wear or damage. Ensure all pivot points move freely.
- čišćenje: Wipe the closer body with a soft, damp krpom da biste uklonili prašinu i prljavštinu. Izbjegavajte abrazivna sredstva za čišćenje.
- Test funkcionalnosti: Periodically test the door's closing and latching speed to ensure it operates as desired. Readjust if needed.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Vrata se zatvaraju prebrzo/presporo | Closing speed or latching speed adjustment incorrect. | Adjust the appropriate speed valve (refer to Section 5). |
| Vrata se ne zaključavaju pravilno | Latching speed too slow or arm assembly misaligned. | Increase latching speed. Check arm alignment and ensure all screws are tight. |
| Zatvarač vrata curi ulje | Internal seal damage or extreme temperature fluctuations. | Za pomoć kontaktirajte korisničku podršku. Ne pokušavajte popraviti. |
| Zatvarač vrata proizvodi prekomjernu buku | Loose mounting screws or worn arm components. | Check and tighten all mounting screws. Inspect arm assembly for wear. |
8. Specifikacije
| Feature | Specifikacija |
|---|---|
| Broj modela | 60460 |
| Prilagođavanje sile | EN 2-4 (Adjustable) |
| Maksimalna težina vrata | 85 kg |
| Maksimalna širina vrata | 1100 mm |
| Vrsta instalacije | Površinski montiran |
| Materijal | Metal |
| Boja | Tamno smeđa |
| Dimenzije proizvoda | 180 x 40 x 60 mm (7.09 x 1.57 x 2.36 mm) |
| Težina artikla | 1.54 kg (3.39 funti) |
| Standard Met | EN 2-4 |
9. Garancija i podrška
CISA products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official CISA website. For technical support, replacement parts, or further assistance, please contact your local CISA distributor or customer service.
Za više informacija posjetite službenu osobu CISA website.
