Dynascan LP-66 Professional VHF Walkie-Talkie

1. Uvod

Thank you for choosing the Dynascan LP-66 Professional VHF Walkie-Talkie. This device is engineered for robust and clear two-way radio communication, operating within the 66-88 MHz frequency band. With its durable design and advanced features, the LP-66 is ideal for professional use in various environments requiring reliable short-range communication. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Dynascan LP-66.

2. Sigurnosne informacije

Please read and understand all safety instructions before using the Dynascan LP-66. Failure to follow these instructions may result in injury, damage to the device, or voiding of the warranty.

• Sigurnost baterije: Use only the specified battery and charger. Do not short-circuit, incinerate, or disassemble the battery. Dispose of batteries properly according to local regulations.
• antena: Ne dodirujte antenu tokom prenosa. Izbjegavajte korištenje radija s oštećenom antenom, jer to može uzrokovati lakše opekotine.
• Eksplozivna okruženja: Ne koristite radio u okruženjima sa zapaljivim plinovima, parama ili eksplozivnom prašinom.
• Izloženost vodi: This device is not water-resistant. Avoid exposure to water or high humidity.
• smetnje: Turn off the radio in areas where radio devices are prohibited, such as hospitals or aircraft.
• čišćenje: Use a soft, dry cloth for cleaning. Do not use harsh chemicals or solvents.
• Usluga: Ne pokušavajte sami popravljati uređaj. Sve servisne radove prepustite kvalifikovanom osoblju.

3. Sadržaj paketa

Prilikom otvaranja paketa, molimo Vas da provjerite da li se nalaze svi sljedeći artikli:

• Dynascan LP-66 Walkie-Talkie Unit
• Punjiva baterija
• Stoni punjač
• AC adapter za punjač
• Belt Clip
• Hand Strap
• Korisnički priručnik (ovaj dokument)

Slika 3.1: The Dynascan LP-66 walkie-talkie shown with its complete set of accessories, including the radio unit, battery, charger, power adapter, belt clip, and hand strap.

4. Proizvod je gotovview

Familiarize yourself with the components of your Dynascan LP-66 walkie-talkie.

Slika 4.1: Front view of the Dynascan LP-66, displaying the display screen, keypad, and antenna.

Slika 4.2: Top view of the LP-66, highlighting the power/volume knob and channel selector knob, along with the antenna connector.

Slika 4.3: Side view of the LP-66, showing the dual audio accessory jacks for connecting external microphones or earpieces.

Slika 4.4: Druga strana view of the LP-66, illustrating the USB charging port and the attachment point for the belt clip.

5. Podešavanje

5.1 Instalacija baterije

1. Provjerite je li radio isključen.
2. Poravnajte baterijski paket sa žljebovima na stražnjoj strani radija.
3. Pomaknite baterijski paket prema gore dok ne klikne na svoje mjesto.
4. Da biste je uklonili, pritisnite osigurač za otpuštanje baterije (ako postoji) i pomaknite bateriju prema dolje.

5.2 Punjenje baterije

Slika 5.1: The desktop charger cradle and AC power adapter for the Dynascan LP-66.

1. Connect the AC power adapter to the charger cradle.
2. Uključite AC adapter u standardnu ​​zidnu utičnicu.
3. Place the radio (with battery installed) into the charger cradle. Ensure the charging contacts align.
4. The charging indicator light on the cradle will illuminate (typically red for charging, green for fully charged).
5. Potpuno punjenje obično traje 3-4 sati. Nemojte prepuniti bateriju.

5.3 Pričvršćivanje antene

Zavrnite antenu u smjeru kazaljke na satu u konektor na vrhu radija dok je čvrsto ne pričvrstite prstima. Nemojte previše zategnuti.

5.4 Attaching the Belt Clip and Hand Strap

Attach the belt clip to the designated screws on the back of the radio. The hand strap can be looped through the eyelet on the side or top of the radio for secure carrying.

6. Uputstvo za upotrebu

6.1 Uključivanje/isključivanje i kontrola jačine zvuka

Rotate the power/volume knob (typically the left knob on top) clockwise to turn the radio on. Continue rotating clockwise to increase the volume. Rotate counter-clockwise to decrease volume and turn the radio off.

6.2 Odabir kanala

Rotate the channel selector knob (typically the right knob on top) to select the desired communication channel. The selected channel number will be displayed on the screen. The LP-66 supports up to 400 channels.

6.3 Prenos i prijem

• Primanje: When the radio is on and tuned to an active channel, it will automatically receive incoming transmissions. The speaker will output the audio.
• Prenos: To transmit, press and hold the Push-To-Talk (PTT) button, usually located on the side of the radio. Speak clearly into the microphone, holding the radio approximately 2-5 cm from your mouth. Release the PTT button to stop transmitting and return to receive mode.

6.4 Keypad Functions (if applicable)

The LP-66 features a basic keypad for additional functions. Refer to the on-screen prompts or specific programming instructions for advanced features such as frequency input, scanning, or squelch level adjustment.

7. Održavanje

7.1 Čišćenje

Obrišite površinu radija mekom krpomamp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure the radio is dry before use or charging.

7.2 Njega baterija

• Prije prve upotrebe do kraja napunite bateriju.
• Avoid completely discharging the battery frequently, as this can reduce its lifespan.
• If storing the radio for an extended period, remove the battery and store it in a cool, dry place at approximately 50% charge.

7.3 Skladištenje

Radio čuvajte na suhom mjestu bez prašine, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

8. Otkrivanje problema

9. Specifikacije

10. Garancija i podrška

For warranty information, please refer to the warranty card included with your product or contact your point of purchase. Dynascan products are designed for reliability and performance.

For technical support or inquiries, please visit the official Dynascan webstranice ili kontaktirajte njihov odjel za korisničku podršku.
Visit the Dynascan Store on Amazon