Važne informacije o sigurnosti
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Uvijek pažljivo slijedite upute za sastavljanje kako biste spriječili nestabilnost ili urušavanje.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- Nemojte prekoračiti maksimalnu težinu od 3500 lbs.
Sadržaj paketa
Prije početka montaže provjerite da li su sve komponente prisutne.
- Box Spring Frame Components
- Fabric Cover
- Uputstvo za instalaciju
- Vijci
- Ključ
Postavljanje i montaža
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Potreban alat:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
Koraci montaže:
- Raspakujte komponente: Pažljivo izvadite sve dijelove iz ambalaže i položite ih na čistu, ravnu površinu. Provjerite da li su sve navedene komponente prisutne.
- Rasklopite okvir: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Sigurne veze: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Ugradnja letvica: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Nanesite navlaku od tkanine: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Uputstvo za upotrebu
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- plasman: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Postavljanje madraca: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Kapacitet težine: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Smanjenje buke: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Održavanje i njega
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Čišćenje poklopca: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Čišćenje okvira: Obrišite metalni okvir suhom krpom kako biste uklonili prašinu i ostatke. Izbjegavajte upotrebu jakih hemikalija ili abrazivnih sredstava za čišćenje.
- Redovni pregled: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Rješavanje problema
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Squeaking Noise | Labavi spojevi ili neravnomjeran položaj. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Nestabilnost/Klimanje | Incomplete assembly or damaged components. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Udubljivanje madraca | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Specifikacije
| Feature | Detalj |
|---|---|
| Brand | MAF |
| Broj modela | MAF-MT33-10K |
| Veličina | Kralju |
| Dimenzije proizvoda | 78.8 cm D x 75.5 cm Š x 10 cm V |
| Kompatibilna veličina madraca | 80"D x 76"Š |
| Posebna karakteristika | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Tip završetka | Powder Coated |
| Uključene komponente | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Upute za njegu proizvoda | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Obavezna montaža | Da |
| Udaljenost od tla do predmeta | 10 inča |
| Težina artikla | 49.1 funte |
| Maksimalni kapacitet težine | 3500 lbs |
Figure 5: MAF Box Spring Size Chart.
Garancija i podrška
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
