Uvod
The Aguilar Tone Hammer Preamp Direct Box Pedal V2 is a versatile and essential tool for bassists seeking inspiring tone and flexibility in both live and studio environments. This pedal combines a high-quality preamp, a direct box, and a distortion circuit, offering comprehensive tone-shaping capabilities. Its robust construction ensures durability, making it a reliable companion for any musician.
Ključne karakteristike
- Svestrana funkcionalnost: Functions as a preamp, DI box, and distortion pedal.
- Advanced Tone Shaping: Features a 3-band EQ with fully sweepable midrange frequencies, in addition to bass and treble controls.
- Updated Drive Circuit: Allows for precise control over clean and overdriven tones, with an additional gain structure and EQ accessible via footswitch.
- Robusna konstrukcija: Housed in a sturdy aluminum chassis for durability.
- Integrated Footswitches: Dedicated footswitches for engaging the preamp and activating the drive circuit.
- Sveobuhvatno povezivanje: Equipped with 1/4" input and output jacks, an XLR output for direct recording, Aux In, and a Headphone Output for silent practice.
Kontrole i funkcije
Tone Hammer Preamp Direct Box Pedal V2 features an intuitive layout of controls designed for optimal tone shaping and ease of use. Familiarize yourself with each control to unlock the full potential of your pedal.
Slika 1: Vrh view of the Tone Hammer Preamp Pedal V2, highlighting its control layout.
Kontrola pojačanja
Figure 2: Detail of the Gain control knob.
The Dobitak knob controls the input level of your instrument. Adjusting this control affects the overall sensitivity and can introduce subtle warmth or more aggressive saturation, especially when the drive circuit is engaged. A blue LED labeled "Engage" illuminates when the preamp section is active.
Kontrola visokih tonova
Figure 3: Detail of the Treble control knob.
The Visoki tonovi knob adjusts the high-frequency content of your tone. Turn clockwise to increase brightness and clarity, or counter-clockwise to reduce harshness and smooth out the high end.
Bass Control
Figure 4: Detail of the Bass control knob.
The Bas knob controls the low-frequency content. Rotate clockwise for a fuller, more powerful low end, or counter-clockwise to tighten up the bass response and prevent muddiness.
Mid Freq and Mid Level Controls
Figure 5: Detail of the Mid Freq and Mid Level controls.
The Mid Freq knob selects the center frequency for the midrange boost or cut, allowing you to pinpoint specific frequencies. The Srednji nivo knob then adjusts the amount of boost or cut at the selected frequency. This fully sweepable midrange section provides exceptional control over your instrument's presence and character.
Kontrola jačine zvuka
Figure 6: Detail of the Volume control knob.
The Volume knob controls the overall output level of the pedal. Use this to match the signal level to your ampLifier ili interfejs za snimanje.
Upravljanje pogonom
Figure 7: Detail of the Drive control knob.
The Vozi knob adjusts the amount of gain applied to the signal when the drive circuit is active. This allows for fine-tuning of the overdriven sound, from subtle grit to heavy distortion.
Mix Control
Figure 8: Detail of the Mix control knob.
The Mix knob blends the clean signal with the overdriven signal. This allows you to retain clarity and low-end presence while adding the desired amount of distortion.
Uključite nožni prekidač
Figure 9: Detail of the Engage footswitch.
The Angažirajte se footswitch activates or bypasses the preamp section of the pedal. When engaged, the blue "Engage" LED will light up.
Nožni prekidač za vožnju
Figure 10: Detail of the Drive footswitch.
The Vozi footswitch engages or disengages the updated drive circuit. When active, the red "Drive" LED will light up, allowing you to switch between clean and overdriven tones instantly.
Ulazne i izlazne utičnice
Figure 11: Rear panel connections of the Tone Hammer Preamp Pedal V2.
The IN (Input) jack is where you connect your instrument. The OUT (Output) jack connects to your amplifier's input or to the input of another effects pedal in your signal chain. Both are standard 1/4" audio jacks.
XLR Output and Controls
Figure 12: Side panel with XLR output and related controls.
The XLR output provides a balanced direct signal for connecting to mixing consoles or recording interfaces. The PRE/POST switch determines whether the XLR output signal is taken before (Pre) or after (Post) the pedal's EQ and gain stages. The LIFT switch helps eliminate ground hum by lifting the ground connection of the XLR output.
Aux In and Headphone Output
The AUX IN jack allows you to connect an external audio source (e.g., an MP3 player or smartphone) for practice. The Izlaz za slušalice enables silent practice, allowing you to monitor your sound directly from the pedal without an amplifier.
Setup
- Priključak za napajanje: Connect an 18V DC power supply (not included) to the 18V power input jack on the rear of the pedal. Ensure the power supply meets the specified voltagi trenutnim zahtjevima za sprječavanje oštećenja.
- Priključak instrumenta: Plug your bass guitar or other instrument into the 1/4" IN Jack.
- Izlazna veza: Connect the 1/4" OUT utikač za tvoj amplifier's input or to the input of another effects pedal in your signal chain.
- DI Connection (Optional): For direct recording or connecting to a PA system, use an XLR cable to connect the XLR output to a mixing console or audio interface. Adjust the PRE/POST i LIFT switches as needed for optimal signal routing and noise reduction.
- Auxiliary and Headphone Connections (Optional): For silent practice, connect headphones to the Headphone Output and an external audio device to the AUX IN Jack.
Operacija
Tone Hammer Preamp Pedal V2 is designed for straightforward operation, allowing you to quickly dial in your desired sound.
- Engaging the Preamp: Pritisnite Angažirajte se footswitch to activate the preamp section. The blue "Engage" LED will light up.
- Adjusting Clean Tone: Sa preamp engaged and the Drive circuit disengaged (red "Drive" LED off), use the Dobitak, Visoki tonovi, Bas, Mid Freq, i Srednji nivo controls to shape your clean tone.
- Activating Drive: Pritisnite Vozi footswitch to engage the drive circuit. The red "Drive" LED will light up. Use the Vozi i Mix knobs to control the amount of distortion and blend it with your clean signal.
- Izlazni nivo: Podesite Volume knob to set the overall output level of the pedal.
- Tiha praksa: When using headphones and Aux In, the pedal provides a complete practice solution without needing an amplifier.
For a visual demonstration of the pedal's features and sound, please refer to the official product video below:
Video: The Tone Hammer Preamp Direct Box Pedal. This video provides an overview of the pedal's features, including its EQ, updated drive circuit, and connectivity options, along with sound demonstrations.
Održavanje
- čišćenje: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Skladištenje: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power supply.
- Održavanje kablova: Ensure all cables are in good condition and properly connected to prevent signal loss or damage to the jacks.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema izlaza zvuka. | Incorrect cable connections, power supply issue, pedal not engaged. | Check all cable connections (input, output, power). Ensure the correct 18V power supply is used. Press the Engage footswitch to activate the preamp. |
| Neželjena buka ili zujanje. | Petlja uzemljenja, neispravni kablovi, smetnje. | Uključite se LIFT switch on the XLR output. Try different cables. Ensure power supply is isolated from other noisy devices. |
| Drive circuit not engaging. | Drive footswitch not pressed, pedal not powered. | Ensure the pedal is powered on and the Engage footswitch is active. Press the Drive footswitch firmly. |
| Weak or distorted sound (unexpectedly). | Netačno pojačanjetaging, low battery (if applicable, though this pedal uses AC power), incorrect impedance. | Podesite Dobitak i Volume controls. Ensure your instrument's output is appropriate for the pedal's input. |
Specifikacije
| Specifikacija | Detalj |
|---|---|
| Broj modela | THPREPEDAL |
| Dimenzije (D x Š x V) | 6.7" x 3.15" x 4.25" (17.02 cm x 8.0 cm x 10.8 cm) |
| Težina | 1.41 unce (40 grama) |
| Boja | Srebro |
| Hardversko sučelje | 1/4-inčni audio, XLR |
| Format signala | Analog |
| Izvor napajanja | AC Adapter (18V DC, 1000mA recommended) |
Garancija i podrška
Aguilar products are built to the highest standards of quality and reliability. For information regarding warranty coverage, product registration, or technical support, please visit the official Aguilar Amplifikacija website or contact your authorized Aguilar dealer. Keep your proof of purchase for warranty claims.
Za više informacija posjetite: www.aguilaramp.com
