Uvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ASD 2x2 LED Flat Panel Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for indoor use only in commercial or industrial settings such as offices, schools, hospitals, retail spaces, and residential areas.
Sigurnosne informacije
- UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje na osiguraču ili prekidaču prije instalacije ili servisiranja.
- Instalaciju treba izvesti kvalifikovani električar.
- Osigurajte dovod voltage is compatible with the luminaire (120-277V).
- Do not handle live wires.
- Ovaj proizvod je pogodan za damp lokacijama.
- Nemojte modificirati učvršćenje.
Karakteristike proizvoda
- moderan dizajn: LED back-lit flat panel with anti-glare PC lens and durable commercial-grade aluminum housing.
- Microwave Motion Sensor: Built-in sensor automatically turns off the fixture when no motion is detected. Settings are adjustable via remote control (sold separately, ASIN B0D2KRKZHN).
- Color and Power Selectable: Choose between 3500K Neutral White, 4000K Cool White, or 5000K Daylight color temperatures and adjust power (20W/25W/30W) with a simple switch.
- Dimmable Driver: 0-10V dimmable driver with circuit overload, short circuit, and low-voltage zaštita.
- Dug životni vek: Calculated lifespan up to 180,000 hours.
- Certifikati: UL and DLC Premium certified.
Postavljanje i instalacija
The ASD 2x2 LED Flat Panel Light offers multiple mounting options: recessed, suspended, and surface mount. This section details the recessed installation process. For suspended or surface mount installations, additional hardware (sold separately) is required.
Koraci ugradnje u ugradnju:
- Pripremite panel: Podignite sve montažne kopče duž rubova ploče. Okrenite glavu montažne kopče prema van.
- Električni priključak: Connect the wires into the junction box of the panel. Match the neutral (N), live (L), and ground (G) wires using appropriate wire nuts. Ensure power is disconnected before making any electrical connections.
- Osigurajte ploču: Adjust the panel into place within the ceiling grid. Ensure the clips are securely fastened to the ceiling's T-BAR/T-GRID.
Image: Step 1 shows how to adjust the mounting clips on the LED panel.
Image: Step 2 illustrates connecting the electrical wires to the panel's junction box.
Image: Step 3 shows the final placement and securing of the LED panel in the ceiling grid.
Ostale opcije montaže:
The panel supports surface mount (with ASD-FDW-ELP24 frame) and suspended mount (with ASD-CHS4 kit). These accessories are not included and must be purchased separately.
Image: This diagram illustrates the three available mounting methods: recessed, surface, and suspended.
Uputstvo za upotrebu
Temperatura boje i Wattage Izbor:
The LED panel features selectable color temperature (CCT) and wattage settings. These can be adjusted using switches located on the fixture before installation or by using the remote control (sold separately).
- Temperature boje: 3500K (Neutral White), 4000K (Cool White), 5000K (Daylight).
- Wattage Opcije: 20W, 25W, 30W.
Image: This image displays the switches for selecting desired color temperature and wattage.
Microwave Motion Sensor Operation:
The integrated microwave motion sensor detects movement and controls the light output. The sensor settings can be customized using the ASD-06RC remote control (ASIN B0D2KRKZHN), which is sold separately.
Image: This diagram shows the motion sensor's detection range and configurable parameters like hold time, stand-by period, and stand-by dimming.
Remote Control Functions (ASD-06RC, sold separately):
| Dugme | Funkcija | Napomene |
|---|---|---|
| ON/OFF | Uključite/isključite senzor. | |
| Auto | Enter "sensor mode" and perform previous settings. | |
| Reset | Enter "sensor mode" and perform the default settings. | |
| Scene | Prikazuje trenutna podešavanja sačuvana u daljinskom. | |
| Počni | Pritisnite ovo da započnete postavljanje scene. | |
| Memorija | Sprema postavke scene. | |
| Prijavite se | Primjenjuje trenutne postavke scene na uređaj. | |
| Visina montaže | Adjust detection area/sensitivity levels according to real installation situations, higher or lower. | |
| Pošalji | Pamti i šalje prethodna podešavanja pojedinačnih parametara. | |
| Domet detekcije | Also known as "Sensitivity". 100% means the highest sensitivity and longest distance. Use this button and the +/- buttons to adjust. | |
| Senzor dnevne svjetlosti | Unaprijed postavljeni nivo osvjetljenja u luksima pri kojem će se detektirati pokret. Koristite ovo dugme i dugmad +/- za podešavanje. | |
| Stand-by zatamnjenje | After hold time, the light will dim from 100% to optional stand-by dimming levels. Use this button and the +/- buttons to adjust. | |
| Hold Time | Period u kojem će svjetlo ostati upaljeno 100% nakon što nije detektovano kretanje. Koristite ovo dugme i dugmad +/- za podešavanje. | |
| Stand-by period | The period after hold time, during which the light keeps stand-by dimming level. Use this button and the +/- buttons to adjust. | |
| +/- | Glavni funkcionalni tasteri za podešavanje faktora na željeni nivo. | |
| Dole | Press "-" button to dim light directly to non-detection mode. | |
| CCT Selectable | Ne odnosi se na ovaj proizvod. | |
| Snaga | Adjust brightness in ON/OFF mode & sensor mode, minimum 10%, max 100%, each time this button is pressed it is changed by 3%. | |
| Rezervirano dugme | Ne odnosi se na ovaj proizvod. | |
| Daylight Harvesting | Omogućena ili onemogućena funkcija prikupljanja dnevne svjetlosti. | |
| Test dugme | Press this button to test the sensor, it will temporarily change the hold time to 2s. This setting cannot be saved. |
Image: The ASD-06RC remote control, used for adjusting the motion sensor settings.
Održavanje
The ASD 2x2 LED Flat Panel Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- čišćenje: Isključite napajanje prije čišćenja. Koristite meku, suhu ili blago natopljenu krpu.amp krpu za brisanje površine panela. Nemojte koristiti abrazivna sredstva za čišćenje, rastvarače ili jake hemikalije, jer mogu oštetiti završnu obradu ili optičke komponente.
- inspekcija: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and contact a qualified electrician for repair.
- Zamjena žarulje: The LED light source is integrated and not user-replaceable. The fixture has a long lifespan, reducing the need for frequent replacements.
Rješavanje problema
If you encounter issues with your LED Flat Panel Light, refer to the following common troubleshooting steps:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. | Nema napajanja; labavo ožičenje; neispravna ugradnja. | Check circuit breaker/fuse. Ensure all wiring connections are secure. If problem persists, contact support. |
| Svjetlo neočekivano treperi ili se prigušuje. | Incompatible dimmer switch; unstable power supply; loose wiring. | Ensure a 0-10V dimming system is used. Verify stable power. Check wiring connections. |
| Motion sensor not detecting movement or activating incorrectly. | Incorrect sensor settings; obstruction; sensor malfunction. | Adjust sensor settings using the remote control (hold time, detection range). Ensure no obstructions block the sensor. Reset sensor to default settings. |
| Color temperature or wattage not changing. | Switches not set correctly; remote control issue. | Verify physical switches on the fixture are set to desired CCT/wattage. If using remote, ensure it's paired and functioning. |
Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | A-BLP-22A30-MS |
| Dimenzije (D x Š x V) | 23.74" x 23.74" x 1.37" (603 mm x 603 mm x 35 mm) |
| Wattage | Selectable: 20W / 25W / 30W |
| Osvetljenost | Do 3633 lumena (pri 30W) |
| Temperatura boje (CCT) | Selectable: 3500K (Neutral White) / 4000K (Cool White) / 5000K (Daylight) |
| Voltage | 120-277V |
| Dimmable | Yes, 0-10V Dimming |
| Senzor pokreta | Built-in Microwave Motion Sensor |
| Kontrolni metod | Remote (ASD-06RC, sold separately) |
| Materijal | Aluminij, željezo, polikarbonat |
| CRI | >80 |
| Životni vijek | 180,000 hours (calculated) |
| Certifikati | UL, DLC Premium |
| Vrsta instalacije | Recessed, Surface Mount (kit sold separately), Suspended (kit sold separately) |
| Unutrašnja/vanjska upotreba | Samo za unutrašnju upotrebu |
Garancija
ASD pruža 5 godine ograničene garancije for this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official ASD websajtu ili kontaktirajte korisničku podršku.
Podrška
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact ASD customer support.
- Online resursi: Visit the official ASD webstranicu za dodatne informacije o proizvodu, često postavljana pitanja i dokumente za podršku.
- Kontakt informacije: Refer to the product packaging or the ASD webstranicu za najnovije kontakt podatke korisničke službe.
Dodatni resursi
For a quick and hassle-free installation, you can also refer to the step-by-step manual available on our website or through the product's Amazon listing.
Zvanični korisnički priručnik (PDF): Preuzmite PDF
