diymore Wireless Thermostat Socket Instruction Manual

1. Uvod i krajview

This manual provides detailed instructions for the diymore Wireless Thermostat Socket, Model KABB0017-AAA. This device consists of a wireless transmitter (thermostat unit) and a plug-in receiver (socket) with an integrated temperature sensor. It is designed for controlling heating or cooling appliances to maintain a desired temperature in a room. No complex installation or wiring is required; simply plug and play.

The thermostat offers both heating and cooling modes, a clear LCD with backlight, and a child lock function for safety.

2. Komponente proizvoda

The diymore Wireless Thermostat Socket system includes two main components:

• Transmitter (Thermostat Unit): This portable unit features an LCD display, control buttons, and an integrated temperature sensor. It requires 2 AA batteries (not included).
• Receiver (Plug-in Socket): This unit plugs directly into a standard wall socket and controls the power supply to your heating or cooling appliance. It has an ON/OFF button and an LED indicator.

3. Podešavanje

3.1 Instalacija baterije (odašiljač)

1. Open the battery compartment cover on the back of the transmitter unit.
2. Insert 2 x AA 1.5V batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover. The LCD display should light up, showing the current temperature and time in standby mode.

3.2 Pairing the Transmitter and Receiver (Code Matching)

To establish communication between the transmitter and receiver:

1. Plug the receiver into a standard household wall socket.
2. Press and hold the ON/OFF button on the receiver for 2 seconds. The LED indicator on the receiver will flash, indicating it is in pairing mode.
3. On the transmitter, press the DOLJE button for 3 seconds. The LED indicator on the receiver should light up steadily and then turn off, confirming successful pairing.
4. If pairing is unsuccessful, ensure the transmitter and receiver are within range (up to 20 meters in an open area) and repeat the steps.

Note: The plug-in receiver must be paired. If you wish to use a new remote thermostat or add more plug-in receivers, repeat the pairing steps for each new device. A single thermostat sender can control an unlimited number of plug-in receivers.

4. Uputstvo za upotrebu

4.1 Osnovni rad

• Uključivanje/isključivanje: Pritisnite POWER button on the transmitter to switch between standby mode and standard operating mode.
• Prikaz informacija: The LCD shows the current temperature, target temperature, and the clock/program status.

4.2 Setting Clock and Calendar

1. Pritisnite i držite SET button for 3 seconds to enter the clock setting mode.
2. Koristite UP / DOLJE buttons to select the day of the week (MO-SU), then press OK.
3. Koristite UP / DOLJE buttons to select 12-hour or 24-hour time format, then press OK.
4. Koristite UP / DOLJE buttons to set the hour, then press OK.
5. Koristite UP / DOLJE buttons to set the minute, then press OK.
6. To reset minutes to 0, press OK.
7. Koristite UP / DOLJE buttons to select the temperature unit (°C or °F), then press OK za potvrdu i izlazak iz moda podešavanja.

4.3 Selecting Heating or Cooling Mode

1. Pritisnite i držite UP button for 3 seconds to switch between Heating Mode (indicated by a flame symbol 🔥) and Cooling Mode (indicated by a snowflake symbol ❄).
2. Koristite UP / DOLJE buttons to select either the flame symbol for heating or the snowflake symbol for cooling.
3. Pritisnite OK da potvrdite svoj izbor.

4.4 Setting Programs (P1-P8)

The thermostat supports 8 programmable periods (P1-P8) for both heating and cooling. P1-P4 are for heating programs, and P5-P8 are for cooling programs.

1. Pritisnite SET button to access the program ON/OFF selection. The 'ON' symbol (standard) is activated.
2. Koristite UP / DOLJE buttons to select 'ON' or 'OFF'.
   • If 'ON' is selected, all programs (P1-P8) are simultaneously active. A 'P' will be displayed next to the time.
   • If 'OFF' is selected, all P1-P8 programs are immediately deactivated, and the 'P' symbol disappears. Only standard heating or cooling will function.
3. Pritisnite OK za potvrdu.

To adjust individual program settings (e.g., specific times and target temperatures for P1-P8), refer to the detailed programming section in the full manual (not fully provided in the source images, but typically involves pressing SET multiple times to cycle through program settings).

4.5 Funkcija zaštite od djece

The child lock prevents accidental changes to settings.

• Aktivacija: The child lock automatically activates if there is no button operation for 10 minutes in any mode (except standby mode). A lock symbol (🔒) will appear on the LCD.
• Deaktivacija: To deactivate the child lock, press and hold the DOLJE dugme na 3 sekunde.

5. Karakteristike

The diymore Wireless Thermostat Socket offers a range of features for convenient and efficient temperature control:

• Bežična kontrola: Transmitter and receiver communicate wirelessly, allowing flexible placement of the thermostat unit. Maximum control distance is 20 meters in an open area.
• Režimi grijanja i hlađenja: Supports both heating (P1-P4 programs) and cooling (P5-P8 programs) appliances.
• Široki temperaturni raspon: Operates within a temperature range of 0°C to 60°C (32°F to 140°F).
• LCD pozadinsko osvetljenje: Green backlight ensures clear visibility of the display in various lighting conditions.
• Prikaz vremena: Podržava 12-satni i 24-satni format vremena.
• Odabir jedinice temperature: Prebacivanje između Celzijusa (°C) i Fahrenheita (°F).
• Zaključavanje za djecu: Prevents unintended operation by locking the controls.
• Ušteda energije: Designed for efficient operation to help manage energy consumption.

6. Održavanje

6.1 Zamjena baterije

When the battery indicator on the LCD shows low power, replace the 2 AA batteries in the transmitter unit. Ensure correct polarity.

6.2 Čišćenje

Wipe the thermostat and receiver with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the devices.

7. Otkrivanje problema

7.1 Operating Principle (Heating Mode)

• If the current temperature is greater than or equal to the target temperature (ACTUAL ≥ TARGET), the flame symbol is displayed, and the connected heating device switches on to raise the room temperature.
• When the current temperature reaches the target temperature (ACTUAL = TARGET), the flame symbol disappears, and the thermostat sends an OFF command to switch off the heating device.
• If the current temperature drops below the target temperature by 1°C / 1.8°F (ACTUAL < TARGET - 1°C/1.8°F), the heating device switches on again.
• In standby mode, the thermostat maintains the room temperature within the range: (Target temperature - 1°C/1.8°F) ≥ Room temperature ≥ Target temperature.

7.2 Operating Principle (Cooling Mode)

• If the current temperature is less than or equal to the target temperature (ACTUAL ≤ TARGET), the snowflake symbol is displayed, and the connected cooling device switches on to lower the room temperature.
• When the current temperature reaches the target temperature (ACTUAL = TARGET), the snowflake symbol disappears, and the thermostat sends an OFF command to switch off the cooling device.
• If the current temperature rises above the target temperature by 1°C / 1.8°F (ACTUAL > TARGET + 1°C/1.8°F), the cooling device switches on again.
• In standby mode, the thermostat maintains the room temperature within the range: Target temperature ≤ Room temperature ≤ (Target temperature + 1°C/1.8°F).

7.3 Funkcija resetovanja

To restore the thermostat to factory settings:

1. Ensure the thermostat is in Heating or Cooling Mode (not standby).
2. Pritisnite i držite UP i DOLJE dugmad istovremeno 3 sekunde.
3. The green backlight will flash 3 times, indicating that all settings have been deleted and factory defaults restored.

8. Specifikacije

9. Garancija i podrška

For warranty information and technical support, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.