ABB PowerValue 11RT 2kVA Uninterruptible Power Supply (UPS) User Manual

1. Uvod

This manual provides comprehensive instructions for the safe and efficient installation, operation, maintenance, and troubleshooting of your ABB PowerValue 11RT 2kVA Uninterruptible Power Supply (UPS). Please read this manual thoroughly before installing or operating the unit to ensure proper functionality and to prevent damage to the equipment or injury to personnel. Keep this manual for future reference.

2. Sigurnosne informacije

Observe the following safety precautions during all phases of UPS installation, operation, and maintenance. Failure to comply with these warnings may result in electric shock, fire, or serious injury.

• Električna opasnost: The UPS contains internal batteries and can supply hazardous voltage even when disconnected from the AC mains.
• Kvalificirano osoblje: Only qualified service personnel should perform installation, maintenance, or repair procedures.
• uzemljenje: Ensure the UPS is properly grounded to prevent electric shock.
• Okruženje: Do not operate the UPS in environments with excessive dust, humidity, or extreme temperatures.
• Sigurnost baterije: Baterije mogu predstavljati rizik od strujnog udara i visoke struje kratkog spoja. Pridržavajte se odgovarajućih mjera opreza prilikom rada s baterijama.

3. Proizvod je gotovview

The ABB PowerValue 11RT 2kVA UPS is designed to provide reliable, high-quality power protection for critical loads. It features a compact design suitable for rack-mount or tower configurations, ensuring continuous power during outages and protecting against power fluctuations.

This image displays the front of the ABB PowerValue 11RT UPS, showing the ventilation grilles, the control panel with a blue LCD screen, and the ABB PowerValue branding. The unit is black and designed for rack-mount or tower configurations.

4. Podešavanje

4.1 Raspakivanje i pregled

1. Carefully unpack the UPS and its accessories from the packaging.
2. Inspect the unit for any signs of shipping damage. If damage is found, do not install and contact your supplier.
3. Sačuvajte materijale za pakovanje za budući transport ili skladištenje.

4.2 Postavljanje

• Place the UPS in a clean, temperature-controlled environment, away from direct sunlight, heat sources, and excessive moisture.
• Ensure adequate airflow around the unit. Maintain at least 10 cm (4 inches) of clearance at the front and rear for ventilation.
• The UPS can be installed in a standard 19-inch rack or used as a tower unit with the provided stands (if applicable).

4.3 Električne veze

1. Ulazna snaga: Connect the UPS input power cord to a properly grounded electrical outlet. Ensure the outlet capacity matches the UPS requirements.
2. Izlazne veze: Connect your critical equipment to the UPS output receptacles. Do not overload the UPS.
3. Komunikacijski portovi: If desired, connect communication cables (e.g., USB, RS-232, network card) for monitoring and management.

5. Operacija

5.1 Prvo pokretanje

1. After all connections are secure, press and hold the power button on the front panel for a few seconds until the UPS powers on.
2. The LCD display will illuminate and show the startup sequence.
3. Allow the UPS to perform its self-test. Once complete, the display will show normal operating status.

5.2 Normalan rad

In normal operation, the UPS provides conditioned power to connected equipment and keeps its batteries charged. The LCD display provides real-time information on input/output voltage, load level, battery status, and operational mode.

5.3 Procedura gašenja

1. Safely shut down all connected equipment.
2. Press and hold the power button on the front panel until the UPS initiates its shutdown sequence.
3. The UPS will power off, and the display will turn off.

6. Održavanje

6.1 Njega baterija

• The UPS batteries are designed for a specific lifespan. Regular self-tests help monitor battery health.
• Replace batteries when indicated by the UPS or after their recommended service life. Battery replacement should only be performed by qualified personnel.

6.2 Čišćenje

• Ensure the UPS is powered off and disconnected from the AC mains before cleaning.
• Za čišćenje vanjske strane uređaja koristite meku, suhu krpu. Ne koristite tekuća ili aerosolna sredstva za čišćenje.
• Održavajte ventilacijske otvore čistim od prašine i otpada.

7. Otkrivanje problema

This section provides solutions to common issues you may encounter with your UPS. For problems not listed here, contact technical support.

8. Specifikacije

Key technical specifications for the ABB PowerValue 11RT 2kVA UPS (Model 4NWP100201R0001):

• Brand: Fig
• Model: PowerValue 11RT 2kVA (4NWP100201R0001)
• Dimenzije proizvoda: 16.77 inča (D) x 17.24 inča (Š) x 3.39 inča (V)
• Težina artikla: 42 funti (19.1 kilograma)
• Boja: Crna
• Voltage: Refer to the product label on the unit for specific input and output voltage ocjene.

9. Garancija i podrška

ABB products are manufactured to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ABB website.

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official channels. When contacting support, please have your product model number (4NWP100201R0001) and serial number available.

Službenik ABB-a Webstranica: www.abb.com