XTUGA SF-1 Wireless XLR System & TS11 Audio Mixer User Manual

Uvod

This manual provides detailed instructions for the XTUGA SF-1 UHF Wireless XLR Transmitter and Receiver system and the XTUGA TS11 Professional 11 Channel Audio Mixer. Please read this manual thoroughly before operating the devices to ensure proper use and optimal performance.

XTUGA SF-1 Wireless XLR System Overview

The XTUGA SF-1 is a compact UHF wireless system designed for microphones, offering reliable audio transmission with low latency. It includes a transmitter and a receiver, both rechargeable and equipped with 48V phantom power for condenser microphones.

XTUGA SF-1 Wireless XLR Transmitter and Receiver

Image: The XTUGA SF-1 wireless system, showing both the transmitter (right) and receiver (left) units. The transmitter has an LCD display, while the receiver has LED indicators for channel, RF, and AF.

Ključne karakteristike

UHF Wireless Transmission: Stable and reliable signal.
48V Phantom Power: Supports both dynamic and condenser microphones.
Rechargeable Battery: Long operating time.
Low Latency: Less than 2ms for real-time sound transmission.
50 Meters Transmission Distance: Stable signal with strong anti-interference.
16 Selectable Frequencies: Allows multiple sets to operate simultaneously.

XTUGA SF-1 Setup

Punjenje jedinica

Before first use, fully charge both the transmitter and receiver using the provided USB cable. The battery indicator LEDs will show charging status.

Image: Illustration showing the XTUGA SF-1 units with a large '6H' indicating approximately 6 hours of rechargeable battery life.

Povezivanje i uparivanje

Spojite odašiljač: Plug the SF-1 transmitter into your microphone's XLR output. If using a condenser microphone, ensure the 48V phantom power is activated on the transmitter if required by your microphone.
Povežite prijemnik: Plug the SF-1 receiver into the XLR input of your mixer, audio interface, or PA system.
Uključeno: Press and hold the Power button on both the transmitter and receiver until their displays/indicators light up.
Automatsko uparivanje: The units should automatically pair. The RF indicator on the receiver will illuminate steadily when a stable connection is established.
Channel Selection (if needed): If interference occurs, press the "CH" button on the transmitter to cycle through available frequencies. The receiver will automatically sync to the new frequency. Up to 16 sets can operate simultaneously.

Image: Depicts multiple XTUGA SF-1 units connected to microphones and a mixer, illustrating the capability of supporting up to 16 selectable frequencies for simultaneous use.

XTUGA SF-1 Operation

Once connected and paired, the SF-1 system provides real-time audio transmission. Ensure the microphone is powered on and functioning correctly. Adjust the volume on your mixer or audio device as needed.

XTUGA SF-1 Low Latency Wireless XLR System

Image: A graphic highlighting the "Low Latency Wireless XLR System" feature of the XTUGA SF-1, showing a musician performing with the units and a clock icon indicating less than 2ms latency.

Upravljanje napajanjem

Uključivanje/isključivanje: Pritisnite i držite dugme za napajanje otprilike 3 sekunde.
Indikator baterije: The LED indicators on the receiver and the LCD on the transmitter show the remaining battery life. Recharge when the battery is low.

XTUGA SF-1 50 Meters Transmission Distance

Image: A graphic illustrating the 50-meter transmission distance capability of the XTUGA SF-1, emphasizing stable signal and strong anti-interference.

XTUGA TS11 Audio Mixer Overview

The XTUGA TS11 is a professional 11-channel audio mixer designed for studio, DJ, and live sound applications. It features extensive input options, a 7-band EQ, 99 DSP effects, independent 48V phantom power, Bluetooth connectivity, and a USB interface for recording.

Slika: Od vrha prema dolje view of the XTUGA TS11 audio mixer, highlighting its 9 mono and 2 stereo input channels with various controls for each channel.

Ključne karakteristike

11 Channels: 9 mono (XLR/TRS combo) and 2 stereo (TRS) inputs.
99 DSP Effects: Built-in digital signal processing for various audio effects.
7-Band Graphic Equalizer: For precise frequency shaping on the main output.
Independent 48V Phantom Power: Available on mono channels for condenser microphones.
Bluetooth Function: Wireless audio streaming from compatible devices.
USB Interface: For direct recording to a computer or playback from a USB drive.
Independent Mute Buttons: For each input channel.

XTUGA TS11 Setup

Power Connection

Connect the provided power adapter to the mixer's power input and then to a suitable power outlet. Press the power switch to turn on the mixer.

Ulazne veze

mikrofoni: Connect microphones to the XLR/TRS combo jacks (channels 1-9). For condenser microphones requiring phantom power, press the 48V PHANTOM POWER button for the respective channel.
Uređaji linijskog nivoa: Connect instruments (keyboards, guitars with DI boxes), media players, or other line-level devices to the TRS inputs.
Stereo ulazi: Use channels 10/11 for stereo line-level sources.

Izlazne veze

Glavni izlaz: Connect the MAIN OUT (XLR or TRS) to your power ampuređaj za snimanje, zvučnike s napajanjem ili uređaj za snimanje.
slušalice: Za monitoring priključite slušalice na PHONES priključak.
AUX Send: Use the AUX SEND for external effects processors or monitor mixes.

XTUGA TS11 Operation

Kontrole kanala

DOBITAK: Podešava ulaznu osjetljivost za svaki kanal. Podesite ovo da biste postigli jak signal bez prekida.
EQ (VISOKI, SREDNJI, NISKI): Tropojasni ekvilajzer za oblikovanje tona svakog kanala.
FX: Controls the amount of internal DSP effect applied to the channel.
PAN: Pozicionira signal kanala u stereo polju (slijeva nadesno).
Fader LEVEL-a: Adjusts the output volume of each channel to the main mix.
MUTE: Silences the individual channel.

XTUGA TS11 Mixer Independent Mute Switch

Image: Close-up of the XTUGA TS11 mixer's channel faders and mute buttons, emphasizing the independent mute switch for each channel.

DSP efekti

The TS11 features 99 built-in DSP effects. Use the PROGRAM knob to select an effect. The display will show the effect number. Adjust the FX SEND and RETURN levels to control the overall effect amount.

Image: A section of the XTUGA TS11 mixer's control panel, highlighting the "99DSP" section with the program knob and display, indicating the selection of built-in reverb effects.

Bluetooth povezivanje

Za povezivanje Bluetooth uređaja:

Press the MODE button on the digital MP3 player section until "Bluetooth" or "BT" is displayed.
On your smart device, search for Bluetooth devices and select "MIX-MP3 BT".
Once paired, you can play audio from your device through the mixer.

Image: A user interacting with the XTUGA TS11 mixer while a smartphone displays a music player, illustrating the mixer's Bluetooth compatibility and the "MIX-MP3 BT" pairing name.

USB reprodukcija i snimanje

USB reprodukcija: Umetnite USB disk sa zvukom files into the USB port. Use the controls in the digital MP3 player section to navigate and play tracks.
USB snimanje: Connect the mixer to a computer via the USB port. The mixer will appear as an audio interface. Use your preferred recording software to capture the main mix.

Održavanje

čišćenje: Use a soft, dry cloth to clean the surfaces of both the SF-1 units and the TS11 mixer. Avoid liquid cleaners or abrasive materials.
Skladištenje: Uređaje čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
Battery Care (SF-1): For optimal battery life, avoid fully discharging the SF-1 units frequently. Recharge them regularly, especially if storing for extended periods.

Rješavanje problema

Problem	Mogući uzrok	Rješenje
SF-1: No sound or intermittent signal.	Jedinice nisu uparene. Niska baterija. Smetnje od drugih bežičnih uređaja. Izvan opsega. Incorrect microphone connection.	Ensure both transmitter and receiver are powered on and paired. Recharge units. Change the operating frequency on the SF-1 transmitter. Smanjite udaljenost između jedinica. Check microphone connection and phantom power setting.
TS11: No sound from main output.	Main fader down. Channel mute engaged. Incorrect output connection. Gain too low on channels.	Raise the MAIN L/R faders. Disengage mute buttons on active channels. Verify main output cables are correctly connected to powered speakers/amplifier. Increase GAIN on input channels.
TS11: Bluetooth not connecting.	Mixer not in Bluetooth mode. Device already paired to another mixer. Bluetooth device too far.	Ensure the mixer's digital player is set to "BT" mode. Isključite se s drugih uređaja. Move Bluetooth device closer to the mixer.

Specifikacije