MINELAB X-TERRA ELITE EXPEDITION Uputstvo za upotrebu detektora metala

Uvod

This manual provides instructions for the proper setup, operation, and maintenance of your MINELAB X-TERRA ELITE EXPEDITION metal detector. This advanced device is designed for precision metal detection across various terrains, including underwater environments, utilizing Multi-IQ technology for enhanced performance.

Sadržaj paketa

The MINELAB X-TERRA ELITE EXPEDITION Bundle includes the following items:

• MINELAB X-TERRA ELITE Metal Detector unit
• V12X Coil with Skidplate (12"x9" Elliptical Double-D)
• V8X Coil with Skidplate (8"x5" Elliptical Double-D)
• ML-85 Low Latency Wireless Headphones
• Kabel za punjenje
• MINELAB Finds Pouch
• Korisnički priručnik (ovaj dokument)

Slika: Prekoview of the MINELAB X-TERRA ELITE EXPEDITION Bundle, showing the main detector unit, two search coils (V12X and V8X), wireless headphones, and a finds pouch.

Setup

Skupština

1. Pričvrstite zavojnicu za pretraživanje: Securely attach your preferred search coil (V12X or V8X) to the lower stem using the provided bolt and washers. Ensure it is tightened sufficiently to prevent wobbling.
2. Spojite kabel zavojnice: Route the coil cable up the stem and wrap it around the shaft. Plug the connector into the control box port.
3. Sastavite osovinu: Extend the adjustable shaft to a comfortable length. The detector has a collapsible length of 25 inches (635 mm) and an extended length of 54 inches (1372 mm).
4. Adjust the Armrest: Position the armrest for comfortable use, ensuring your forearm is supported.

Image: Diagram illustrating the main components of the X-TERRA ELITE detector, including the adjustable shaft, LCD display and backlit keypad, adjustable armrest, and waterproof V12X coil with skidplate.

Image: Comparison of the MINELAB X-TERRA ELITE detector in its collapsed (25 inches) and extended (54 inches) configurations, highlighting its portability and adjustable length.

Instalacija i punjenje baterije

The X-TERRA ELITE uses 1 Lithium Ion battery (included). Ensure the battery is fully charged before first use. Connect the charging cable to the detector and a suitable USB power source.

Veza za slušalice

The ML-85 Low Latency Wireless Headphones are included. Refer to the headphone's separate manual for specific pairing instructions. The detector also has built-in speakers.

Image: The Expedition Pack contents, showing the V12X coil, V8X coil, and low latency wireless headphones.

Uputstvo za upotrebu

Uključivanje/isključivanje

Press and hold the Power ON/OFF button located on the control panel to turn the detector on or off.

Kontrolna tabla završenaview

Slika: Detaljna view of the MINELAB X-TERRA ELITE control panel, labeling buttons for Power ON/OFF, Wireless Audio Control, Lighting Controls, Detect Mode, All-Metal Mode, Pinpoint/Detect, Sensitivity/Settings Adjust, Accept/Reject, and Frequency Select.

The control panel features an LCD display and backlit keypad for easy visibility. Key functions include:

• Uključivanje/isključivanje: Uključuje ili isključuje uređaj.
• Wireless Audio Control: Manages wireless headphone connection.
• Kontrole rasvjete: Adjusts flashlight, display backlight, and keypad backlight.
• Način otkrivanja: Selects various search modes.
• Režim "sve od metala": Engages a mode to detect all types of metal.
• Pinpoint/Detect: Used for precise target location.
• Sensitivity/Settings Adjust: Modifies detection sensitivity and other settings.
• Accept/Reject: Allows discrimination of target types.
• Odabir frekvencije: Changes operating frequency.

Načini pretraživanja

The X-TERRA ELITE offers multiple pre-programmed search modes to optimize performance for different environments:

• 2 x Park Modes: Ideal for high-trash areas like parks.
• 2 x Field Modes: Suitable for open fields and general detecting.
• 2 x Beach Modes: Optimized for wet and dry sand conditions.

Image: Diagram illustrating the different search environments (Park, Field, Beach) and the X-TERRA ELITE's ability to adapt with specific search modes.

Multi-IQ tehnologija

The detector utilizes Multi-IQ Simultaneous Multi-Frequency Technology, allowing it to operate on multiple frequencies simultaneously. This enhances detection capabilities across all terrains and target types.

Image: Graphic explaining MINELAB's Multi-IQ technology, showing multiple frequencies working together for comprehensive detection.

Target Identification and Audio

The X-TERRA ELITE provides 119 Target IDs to distinguish between ferrous and non-ferrous metals. The all-tone audio system helps identify target depth and size, allowing for more informed digging decisions.

Image: Illustration of the detector's audio feedback system, indicating that rich audio tones help identify target type, size, and depth.

Precizno ciljanje

With 25 levels of sensitivity and a Pinpoint mode, the detector allows for extreme precision in locating targets, even the faintest signals.

Image: A person using the X-TERRA ELITE detector with a pinpointer, demonstrating the extreme precision feature for recovering small targets.

Vodootporna sposobnost

The X-TERRA ELITE is fully waterproof and submersible up to 16 ft (5 m), making it suitable for detecting in shallow water, rivers, and beaches.

Image: The X-TERRA ELITE detector submerged in water, illustrating its fully waterproof design up to 16 ft (5 m).

Održavanje

Čišćenje

• After use, especially in wet or sandy conditions, wipe down the detector with a damp tkanina.
• Ensure all connectors are clean and dry before storage.
• Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.

Skladištenje

• Store the detector in a cool, dry place away from direct sunlight.
• If storing for extended periods, remove the battery or ensure it is partially charged (around 50%) to prolong battery life.

Rješavanje problema

Nema snage

• Uverite se da je baterija potpuno napunjena.
• Proverite da li je baterija pravilno umetnuta.

Erratic Signals

• Reduce sensitivity settings.
• Perform a ground balance if available (refer to advanced settings in the full manual).
• Move away from sources of electromagnetic interference (power lines, other electronics).

Nema zvuka

• Check headphone connection or pairing.
• Ensure volume is not set to zero.
• Verify built-in speakers are enabled if not using headphones.

Specifikacije

Sigurnosne informacije

Molimo pridržavajte se sljedećih sigurnosnih smjernica:

• Do not submerge the metal detector beyond 16 ft (5 m).
• Use headphones at safe audio volumes to prevent hearing damage.
• Always be aware of your surroundings when operating the detector.
• Exercise caution when digging to avoid injury or damage to property.
• Držite uređaj dalje od ekstremnih temperatura i direktne sunčeve svjetlosti tokom dužeg perioda.

Garancija i podrška

Za informacije o garanciji i tehničkoj podršci, molimo vas da se obratite službenom MINELAB-u. website or contact MINELAB customer service directly. Keep your proof of purchase for warranty claims.

Online resources and FAQs may also be available on the MINELAB support portal.

Za dodatnu pomoć posjetite: www.minelab.com