XTOOL IP500 for BMW OBD2 Scanner User Manual

1. Uvod

The XTOOL IP500 is a specialized automotive diagnostic tool designed for BMW, MINI, and Rolls-Royce vehicles. It offers comprehensive system diagnostics, advanced ECU coding, bi-directional control (active tests), and a wide range of maintenance services. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your IP500 device.

Figure 1.1: XTOOL IP500 Diagnostic Tool

Slika 1.2: Ključne karakteristike iznadview of XTOOL IP500

2. Šta se nalazi u kutiji

Upon unboxing your XTOOL IP500, please verify that all the following components are included:

• 1x XTOOL IP500 for BMW OBD2 SCANNER
• 1x glavni USB na Type-C kabel
• 1x VGA na OBD2-16 glavni kabel
• 1x Quick Guide Package Listing

Figure 2.1: Contents of the XTOOL IP500 Package

3. Tehničke specifikacije

4. Vodič za postavljanje

4.1 Početno uključivanje i punjenje

Before first use, ensure the IP500 device is fully charged. Connect the provided USB to Type-C cable to the device and a suitable power adapter. The device will indicate charging status on the screen.

4.2 Priključivanje na vozilo

To begin diagnostics, connect the IP500 to your vehicle's OBD2 port. The OBD2 port is typically located under the dashboard on the driver's side. Use the VGA to OBD2-16 Main Cable for connection.

1. Locate the vehicle's OBD2 diagnostic port.
2. Plug the VGA end of the cable into the IP500 device.
3. Plug the OBD2-16 pin connector into the vehicle's OBD2 port.
4. Okrenite paljenje vozila u položaj 'ON' (motor isključen).
5. The IP500 device will automatically power on and establish communication with the vehicle.

Figure 4.1: Connecting the IP500 to a Vehicle

5. Uputstvo za upotrebu

5.1 Navigacija po glavnom meniju

After successful connection, the IP500's main menu will appear. Use the touchscreen to navigate through the various functions:

• Automatsko skeniranje: Automatically identifies the vehicle and performs a full system scan.
• dijagnoza: Allows manual selection of vehicle make, model, and system for specific diagnostic functions.
• OBD II: Provides standard OBD2 functions for emissions-related diagnostics.
• Posebna funkcija: Accesses various maintenance and reset services.
• Ažuriranja: Manages software updates for the device.
• Više: Contains additional settings and information.

5.2 Potpuna dijagnoza sistema

The IP500 can scan over 30 control units, providing in-depth diagnostics beyond generic OBD2 tools. This includes modules like DSC (Dynamic Stability Control), FRM (Footwell Module), CAS (Car Access System), and Battery Management. It reads fault codes, displays live data, and captures freeze frames.

Figure 5.1: Full System Scan Tool Interface

Figure 5.2: Comprehensive Full Systems Diagnosis

Examples of diagnostic capabilities:

• ABS Diagnosis: Reads and clears fault codes, checks sensors, and tests the ABS module to identify issues, ensuring proper ABS operation and braking safety.

Figure 5.3: ABS System Diagnosis
• SRS Diagnosis: Reads and clears airbag system fault codes, checks sensors, and resets warning lights after repairs, ensuring proper airbag system function.


Figure 5.4: SRS System Diagnosis

• Engine Diagnosis: Helps locate the cause of check engine lights and clear fault codes, addressing issues like poor combustion.


Figure 5.5: Engine System Diagnosis

• Transmission Diagnosis: Assists in quickly identifying transmission issues and reading fault codes, allowing for timely repairs and clearing warning lights.

Figure 5.6: Transmission System Diagnosis

5.3 Dvosmjerna kontrola (aktivni test)

The Active Test function allows you to send commands to vehicle systems and components to test their functionality directly. This helps pinpoint faulty parts quickly without manual checks.

Figure 5.7: Bi-Directional Control Interface

ExampAktivni testovi uključuju:

• A/C Test: Diagnoses A/C system issues like low refrigerant or compressor failure.


Figure 5.8: A/C System Test

• Wipers Test: Checks the functionality of the vehicle's wiper system.

Figure 5.9: Wiper System Test
• Lights Test: Checks the operation of headlights, taillights, brake lights, and turn signals.


Figure 5.10: Vehicle Lighting Test

• Windows/Mirrors/Doors Test: Checks the smooth movement and proper function of windows, mirrors, and doors.


Figure 5.11: Window, Mirror, and Door Function Test

5.4 Kodiranje ECU-a

The IP500 supports ECU Coding, allowing you to customize OE settings, activate hidden factory features, and integrate aftermarket upgrades by matching ECU settings. This includes features like auto-folding mirrors, custom ambient lighting, or remembering auto start/stop preferences.

NOTE: ECU coding capabilities are model-specific. Please confirm compatibility for your vehicle before attempting coding procedures.

Figure 5.12: Advanced ECU Coding Capabilities

Figure 5.13: Scenarios for ECU Coding

5.5 Special Functions (Maintenance Services)

The IP500 provides 23 special functions for BMW, MINI, and Rolls-Royce vehicles, enabling you to perform common maintenance tasks at home.

Slika 5.14: Gotovoview Usluge održavanja

Figure 5.15: Detailed Menu of Maintenance Services

Key special functions include:

• Oil Service Reset: Clears "Oil Service Due" alerts after oil changes.
• Prilagođavanje gasa: Resolves rough idling and throttle lag.
• Resetovanje EPB-a (elektronske parkirne kočnice): For brake pad replacement.
• SAS (Steering Angle Sensor) Calibration: Realigns the steering wheel's memory after repairs.

Figure 5.16: Steering Angle Reset Procedure
• Krvarenje iz ABS-a: Flushes air from brake lines to fix spongy brakes.


Figure 5.17: ABS Bleeding Process

• Kodiranje injektora: Calibrates individual fuel injectors to the engine control unit (ECU) for precise fuel delivery.


Figure 5.18: Injector Coding Explanation

• BMS (Battery Management System) Reset / Battery Registration: Registers new batteries to the ECU to prevent premature failure and clear "Battery Discharge" warnings.

Figure 5.19: Battery Registration Steps


Figure 5.20: Importance of Battery Registration

NOTE: Special functions vary by vehicle. Access these functions via "Diagnose > Brand > System Selection > Special Function".

5.6 Grafikon podataka uživo u više elemenata

The IP500 allows you to view live data streams from various sensors and modules in a graphical format. It can overlay up to four sensor waveforms simultaneously, which helps in diagnosing intermittent issues and identifying emission faults.

Figure 5.21: Multi-in-One Live Data Graph

Figure 5.22: Benefits of Multi-in-One Live Data Graphing

5.7 Potpune OBD2 funkcije

The IP500 supports all standard OBD2 functions, essential for emissions-related diagnostics and smog checks:

• Read/Clear Codes
• Zamrzni okvir podataka
• Prijenos podataka uživo
• I/M Readiness
• Test O2 senzora
• Test ugrađenog monitora
• Test EVAP sistema
• Informacije o vozilu (VIN, CID, CVN)

6. Održavanje

6.1 Ažuriranja softvera

The XTOOL IP500 offers lifetime free Wi-Fi software updates. Regularly updating your device ensures you have the latest software, vehicle coverage, and diagnostic technologies.

1. Connect the IP500 to a stable Wi-Fi network.
2. Navigate to the 'Updates' section on the main menu.
3. Slijedite upute na ekranu da biste preuzeli i instalirali dostupna ažuriranja.

Figure 6.1: Lifetime Free WiFi Updates

6.2 Čišćenje i njega

Da biste osigurali dugotrajnost vašeg uređaja:

• Clean the screen and exterior with a soft, damp tkanina. Izbjegavajte abrazivna sredstva za čišćenje.
• Keep the device away from excessive moisture, dust, and extreme temperatures.
• Store the device in its original packaging or a protective case when not in use.

7. Otkrivanje problema

If you encounter issues with your XTOOL IP500, consider the following common solutions:

• Uređaj se ne uključuje: Ensure the device is fully charged or connected to a power source. Check the connection to the vehicle's OBD2 port.
• Greška u komunikaciji s vozilom: Verify the OBD2 cable is securely connected to both the device and the vehicle. Ensure the vehicle's ignition is in the 'ON' position. Try a different vehicle to rule out a vehicle-specific issue.
• Functions not available for my vehicle: Not all functions are supported on all vehicle models. Refer to the product compatibility list or contact support to confirm specific function availability for your vehicle's year, make, and model.
• Software update issues: Ensure a stable internet connection. If the update fails, try restarting the device and attempting the update again.
• Ekran ne reaguje: Pokušajte ponovo pokrenuti uređaj. Ako problem i dalje postoji, obratite se tehničkoj podršci.

For persistent issues or advanced technical support, please refer to the support section.

8. Kompatibilnost vozila

The XTOOL IP500 is specifically designed to support 99% of models for BMW, MINI, and Rolls-Royce vehicles.

• For BMW: Compatible with BMW 1-8 Series, X Series, Z Series, M Series, etc.
• For MINI: Compatible with MINI Cooper, Clubman, Countryman, Cabrio, Paceman, Roadster, etc.
• For Rolls-Royce: Compatible with Rolls-Royce Phantom, Ghost, Wraith, Dawn, Cullinan, etc.

NOTE: Some specific models may not be supported. It is recommended to confirm compatibility with XTOOL technical support before purchase if you have a unique or older model.

Figure 8.1: Broad Compatibility for BMW Family Vehicles

9. Garancija i podrška

9.1 Lifetime Free Updates

The XTOOL IP500 comes with lifetime free Wi-Fi software updates, ensuring your device remains current with the latest vehicle data and diagnostic capabilities without additional fees.

9.2 Tehnička podrška

For any technical inquiries, operational assistance, or troubleshooting beyond this manual, please contact XTOOL customer support:

• Email: xtoolinplusus@outlook.com

When contacting support, please provide your device's serial number and a detailed description of the issue to facilitate a quicker resolution.