SYNCO XTalk XPro2 2.4GHz Wireless Intercom Headset System

1. Uvod

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your SYNCO XTalk XPro2 2.4GHz Wireless Intercom Headset System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Figure 1: SYNCO XTalk XPro2 Headset System and Accessories

2. Proizvod je gotovview

The SYNCO XTalk XPro2 is a full-duplex wireless intercom headset system designed for professional team communication. Key features include:

• Enhanced Signal Reception: External antennas provide a reliable 500m (1640ft) connection range.
• Napredno smanjenje buke: Features 2.0 AEC algorithm (150Hz to 7KHz) for clear voice recognition in noisy environments.
• Flexible Team Communication: Supports up to 13-unit connections with group expansion technology.
• Način pojačanja: Enhances signal strength for stable communication through obstacles.
• Dominantni način rada: One-button remote muting function for the Master headset.
• Dug vijek trajanja baterije: Over 24 hours of use with rechargeable and replaceable batteries.
• Praćenje u realnom vremenu: 3.5mm monitoring jack for simultaneous communication and device audio monitoring.

Figure 2: Enhanced Signal Reception

Figure 3: Advanced AEC Noise Reduction

3. Podešavanje

3.1 Manual Pairing

Follow these steps to manually pair your headsets:

1. Uključite sve slušalice.
2. Set one headset as the Master and the others as Level 1.
3. Within 1 minute, long press all 'A' buttons. Release after the first beep. You will hear "Pairing Succeed".
4. Restart all headsets.

3.2 Using SYNCO EasyGo Software

For quick firmware upgrades, voice pack installations, and headset pairing, use the SYNCO EasyGo software. Refer to the user guide for software download and usage instructions from the SYNCO official site.

Figure 4: SYNCO EasyGo Software Interface

4. Uputstvo za upotrebu

4.1 Postavke jačine zvuka

Short press the volume '+' or '-' buttons on the headset to adjust the listening volume.

4.2 Isključivanje/uključivanje mikrofona

To mute or unmute the microphone, rotate the boom arm up or down. Rotating it up mutes the microphone, and rotating it down unmutes it.

4.3 Poništavanje buke

Short press button 'B' to toggle noise cancellation on or off. You will hear a beep to confirm the change.

4.4 Dominant Mode

Press and hold button 'B' to enter Dominant Mode. This mode allows the Master headset to mute all remote headsets instantly. Release the button to exit Dominant Mode.

4.5 Boost Mode

Long press the volume '-' button to hear a "beep", then release to switch between Mode 1, Mode 2, and Mode 3. Mode 2 is the default. Boost Mode enhances signal strength for stable communication, especially through obstacles.

4.6 Praćenje u realnom vremenu

Connect the headset to a device (e.g., camera, recorder) via the 3.5mm TRS port for real-time audio monitoring. This port is for monitoring only and does not output audio.

Figure 5: Real-Time Monitoring Setup

5. Indikatori

The LED indicator on the microphone boom arm provides status information:

• Zeleno svjetlo stabilno: Uparivanje je uspjelo
• Green Light Flashing Slow: Nije povezan
• Green/Yellow Lights Alternating: Poništavanje buke je isključeno
• Red Light Flashing Slow: Low Battery
• Crveno svjetlo stalno: Punjenje

6. Održavanje

To ensure the longevity and optimal performance of your SYNCO XTalk XPro2 headset system, follow these maintenance guidelines:

• čišćenje: Za čišćenje slušalica koristite meku, suhu krpu. Izbjegavajte upotrebu jakih hemikalija ili abrazivnih materijala.
• Skladištenje: Slušalice čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Održavanje baterije: The system uses rechargeable and replaceable Lithium-Ion batteries. Ensure batteries are fully charged before extended use and stored properly if not used for long periods.
• Microphone Protection: Keep the microphone foam cover clean and replace if damaged to maintain audio quality.

Figure 6: 24-Hour Battery Life

7. Otkrivanje problema

If you encounter issues with your SYNCO XTalk XPro2 system, refer to the following common problems and solutions:

• No Audio/Intermittent Connection:
  • Ensure all headsets are powered on and fully charged.
  • Verify proper pairing between Master and Level 1 headsets (refer to Section 3.1).
  • Check the operating range; move closer to the Master headset.
  • Restart all headsets.
• Poor Audio Quality/Excessive Noise:
  • Ensure Noise Cancellation is activated (refer to Section 4.3).
  • Check microphone position and ensure it is not obstructed.
  • Verify that the microphone boom arm is fully down for unmuted operation.
• Slušalice se ne pune:
  • Provjerite je li kabel za punjenje sigurno spojen i na slušalice i na izvor napajanja.
  • Provjerite funkcionalnost izvora napajanja.
  • Verify the charging indicator (Red Light Steady) as per Section 5.

8. Specifikacije

9. Garancija i podrška

For warranty information, technical support, or service inquiries, please refer to the official SYNCO webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.