FLEXISPOT EJ2 Electric Standing Desk Frame Instruction Manual

1. Uvod

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your FLEXISPOT EJ2 Electric Standing Desk Frame. Please read this manual thoroughly before use and retain it for future reference.

The FLEXISPOT EJ2 is a robust and versatile electric standing desk frame designed to support various tabletop sizes, offering a flexible and ergonomic workspace solution. It features dual quiet motors for smooth height adjustments, a memory function to save preferred heights, and an anti-collision system for enhanced safety.

2. Sigurnosne informacije

• Kapacitet težine: Do not exceed the maximum load capacity of 100 kg (220 lbs). Overloading can cause damage to the desk and potential injury.
• Napajanje: Ensure the desk is connected to a grounded power outlet with the correct voltage. Do not use damaged power cords or adapters.
• Odobrenje: Keep the area around the desk clear during height adjustments to prevent obstructions.
• Djeca i kućni ljubimci: Držite djecu i kućne ljubimce dalje od stola tokom rada kako biste spriječili nezgode.
• Funkcija protiv sudara: The desk is equipped with an anti-collision system that automatically stops and reverses if it encounters an obstacle during movement. However, always exercise caution.
• Montaža: Due to the weight of the components, assembly is recommended for two people.
• Održavanje: Do not attempt to disassemble or repair the desk yourself. Contact customer support for assistance.

3. Sadržaj paketa

Please verify that all components are present before beginning assembly. The package typically includes:

• Noge za stol (2)
• Crossbar/Frame (1)
• Kontrolna kutija (1)
• Ručni upravljač/Kontrolna ploča (1)
• Power Adapter and Cable (1)
• Mounting Hardware (screws, Allen wrenches, etc.)
• Uputstvo za upotrebu (ovaj dokument)

Note: The tabletop is sold separately and is not included with the desk frame.

4. Postavljanje i montaža

Assembly of the FLEXISPOT EJ2 desk frame requires careful attention to detail. It is highly recommended to have two people for assembly due to the weight of the components. An electric drill can expedite the process of attaching the tabletop.

1. Raspakujte komponente: Pažljivo izvadite sve dijelove iz ambalaže i položite ih na čistu, ravnu površinu. Provjerite sadržaj pakovanja.
2. Pričvrstite stopala na noge: Secure the foot supports to the bottom of each desk leg using the provided screws.
3. Sastavite prečku: Connect the crossbar sections to form the main frame. Ensure the adjustable width mechanism is correctly aligned.
4. Spojite noge s prečkom: Attach the assembled legs to the crossbar, ensuring all connections are secure.
5. Install Control Box and Handset: Mount the control box and handset (control panel) to the underside of the desk frame using the designated screws.
6. Povezivanje kablova: Connect the motor cables from the legs to the control box, and then connect the handset cable and power cable to the control box.
7. Pričvrstite ploču stola: Carefully place your chosen tabletop onto the assembled frame. Align it properly and secure it using screws (ensure screws are appropriate length for your tabletop thickness to avoid damage).
8. Upravljanje kablovima: Use cable ties or management accessories (not included) to organize cables for a tidy and safe workspace.

Image: The FLEXISPOT EJ2 electric standing desk frame, shown without a tabletop, highlighting its robust structure and integrated control panel.

Image: A technical diagram illustrating the dimensions and adjustable ranges of the FLEXISPOT EJ2 desk frame, including height, width, and depth specifications.

5. Uputstvo za upotrebu

5.1. Podešavanje visine

The FLEXISPOT EJ2 features smooth electric height adjustment. Use the up and down arrow buttons on the control panel to raise or lower the desk to your desired height.

• Dugme za gore (▲): Pritisnite i držite da podignete sto.
• Dugme za dolje (▼): Pritisnite i držite da spustite sto.

Image: Two FLEXISPOT EJ2 desk frames, one black and one white, demonstrating the adjustable height range from 70cm to 119cm, along with lift speed (25mm/s) and low noise operation (<50dB).

5.2. Presetovi memorije

The integrated control panel allows you to save up to four preferred height settings for quick adjustments.

1. Podesite visinu stola na željenu visinu pomoću tipki gore/dolje.
2. Press the 'M' or 'Set' button (if available, or indicated by 'i' on some models) followed by one of the numbered preset buttons (1, 2, 3, or 4). The display will confirm the setting.
3. To recall a saved height, simply press the corresponding numbered button (1, 2, 3, or 4). The desk will automatically move to that height.

Image: A close-up of the FLEXISPOT EJ2 control panel, showing the LED display, up/down buttons, and four memory preset buttons (1, 2, 3, 4) for saving preferred desk heights.

5.3. Funkcija protiv sudara

The EJ2 desk frame is equipped with an obstacle detection system. If the desk encounters a solid object during upward or downward movement, it will automatically stop and reverse slightly to prevent damage or injury.

• The sensitivity of this function can typically be adjusted through the control panel settings (refer to the detailed manual for specific steps, usually involving pressing 'M' and an arrow key).

Image: A FLEXISPOT EJ2 desk demonstrating its anti-collision feature, where the desk automatically stops and slightly reverses when an object (like a cabinet) is detected during downward movement.

5.4. Dual Quiet Motors

The EJ2 frame utilizes dual motors for enhanced stability, faster adjustment speed, and quieter operation. The operating noise level is typically below 50dB, comparable to ambient room sounds, making it suitable for various environments, including quiet offices or homes.

Image: A composite image illustrating the quiet operation of the FLEXISPOT EJ2 desk, with a cat sleeping peacefully on a white desk and a dog sitting calmly next to a black desk, emphasizing the low noise level.

6. Održavanje

Regular maintenance ensures the longevity and optimal performance of your FLEXISPOT EJ2 desk frame.

• čišćenje: Obrišite okvir stola mekom krpomamp krpom. Izbjegavajte upotrebu jakih hemikalija ili abrazivnih sredstava za čišćenje koja bi mogla oštetiti završnu obradu.
• Provjerite veze: Povremeno provjeravajte sve vijke i šrafove kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• Inspekcija kablova: Inspect power and motor cables for any signs of wear or damage. Replace immediately if damage is found.
• podmazivanje: The lifting columns are generally maintenance-free. Do not apply lubricants unless specifically instructed by FLEXISPOT support.

Slika: Krupni plan views of the FLEXISPOT EJ2 desk frame's rubber pads on the support plate (01) to prevent tabletop friction, and adjustable feet (02) for floor protection and vibration reduction during movement.

7. Otkrivanje problema

If you encounter issues with your FLEXISPOT EJ2 desk frame, refer to the following common troubleshooting steps:

• Stol se ne pomiče:
  • Check if the power cable is securely plugged into both the wall outlet and the control box.
  • Provjerite da li su svi kablovi motora pravilno spojeni na upravljačku kutiju.
  • Try resetting the desk (see 'Reset Procedure' below).
• Neravnomjerno kretanje ili buka:
  • Verify that the desk is not overloaded and that weight is evenly distributed.
  • Provjerite ima li prepreka ispod ili oko stola.
  • Provjerite jesu li svi vijci za montažu zategnuti.
• Kodovi grešaka na ekranu:
  • If an error code appears, consult the detailed manual or contact customer support with the specific code. Often, a reset can resolve minor errors.

7.1. Reset Procedura

A reset can often resolve minor operational issues. The exact procedure may vary slightly, but generally involves:

1. Isključite kabel za napajanje iz zidne utičnice.
2. Sačekajte najmanje 10-15 sekundi.
3. Ponovo uključite kabl za napajanje.
4. Press and hold the 'Down' button (▼) until the desk reaches its lowest position and slightly bounces, or until the display shows 'RST' or '000'. Release the button.

If problems persist after troubleshooting, please contact FLEXISPOT customer support.

8. Specifikacije

Image: A diagram illustrating the adjustable foot width of the FLEXISPOT EJ2 desk frame, ranging from 111.6 cm to 148.6 cm, and showing compatible tabletop sizes for various lengths and widths.

9. Garancija i podrška

FLEXISPOT is committed to providing high-quality products and excellent customer service.

• Garancija proizvođača: The FLEXISPOT EJ2 Electric Standing Desk Frame comes with a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
• Korisnička podrška: FLEXISPOT offers dedicated customer support. For any inquiries, technical assistance, or warranty claims, please contact our support team. Support is available in Japanese.
• Kontakt informacije: Please refer to the official FLEXISPOT webnajnovije kontakt podatke za korisničku podršku potražite na web stranici ili u dokumentaciji o kupovini.