Thermaltake E550

Thermaltake CTE E550 TG Mid Tower ATX Case User Manual

Model: CA-1Z8-00MGWN-00

1. Proizvod je gotovview

The Thermaltake CTE E550 TG is a mid-tower ATX case designed for optimal thermal efficiency and aesthetic display. It features a unique CTE Form Factor, which positions the motherboard 90 degrees clockwise, allowing for enhanced airflow and component visibility. The case includes three tempered glass panels for an ultra-wide viewing angle and a dual-chamber design for improved cable management and cooling performance.

Ključne karakteristike:

  • Aesthetic and Dual Chamber Design: Three tempered glass panels offer an ultra-wide viewing angle, complemented by a dual-chamber design for enhanced airflow and cable management.
  • Hidden-Connector Motherboard Support: Compatible with next-generation hidden-connector motherboards from brands like ASUS BTF, MSI PROJECT ZERO, and GIGABYTE PROJECT STEALTH.
  • Flexible Three-Way VGA Installations: Offers versatile graphics card installation options, including rotational PCIe slots and a floating VGA bracket.
  • Comprehensive Cooling Support: Accommodates up to six 140mm fans and three 120mm fans, with radiator support up to 420mm for superior thermal management.
  • Praktični I/O portovi: Features two USB 3.0 Type-A ports, one USB 3.2 Gen 2 Type-C port, and HD Audio ports located on the top panel for easy access.

2. Postavljanje i instalacija

This section provides general guidelines for assembling your PC components within the CTE E550 TG chassis. Always refer to the specific manuals for your individual components (motherboard, GPU, PSU, etc.) for detailed installation instructions.

2.1 Priprema šasije

  1. Raspakivanje: Carefully remove the chassis from its packaging. Inspect for any damage during transit.
  2. Uklanjanje panela: The tempered glass panels (front, rear, left side) can be removed to facilitate installation. Gently unlatch or unscrew them as per the chassis design.

2.2 Instalacija matične ploče

The CTE E550 TG supports ATX, Micro-ATX, Mini-ITX, and E-ATX motherboards. It is also designed to support hidden-connector motherboards.

  1. Instalirajte potrebne odstojnike za format vaše matične ploče.
  2. Pažljivo postavite matičnu ploču na odstojnike, poravnavajući rupe za vijke.
  3. Pričvrstite matičnu ploču vijcima.

Diagram showing motherboard compatibility and hidden connector support
Image: Diagram illustrating motherboard compatibility and the area for hidden-connector motherboards.

2.3 Instalacija grafičke kartice (VGA)

The case offers three flexible ways to install your graphics card:

  • Floating GPU: Utilizes a floating bracket for a unique display.
  • Up Right: Standard vertical installation.
  • Up Right Forward: Vertical installation with the card facing forward.

For vertical installations, a PCIe 4.0 riser cable (sold separately) may be required, especially for the 'Floating GPU' and 'Up Right Forward' configurations.

Diagram showing three GPU installation options: Floating GPU, Up Right, and Up Right Forward
Image: Visual representation of the three available GPU installation methods.

Image showing a PCIe riser cable connected to a GPU in a vertical mount
Image: A PCIe riser cable facilitating a vertical GPU mount.

2.4 Instalacija uređaja za skladištenje

The right chamber of the CTE E550 TG provides dedicated space for storage devices.

  • Install up to two 3.5" hard drives in the HDD Cage.
  • Install two 2.5" drives or one 3.5" drive on the Drive Plate.

Diagram showing SSD and HDD installation locations in the right chamber
Image: Locations for SSDs and HDDs within the chassis's right chamber.

2.5 Instalacija sistema za hlađenje

The CTE E550 TG offers extensive cooling support for both air and liquid cooling solutions.

  • Podrška obožavatelja: Up to six 140mm fans and three 120mm fans can be installed.
  • Podrška radijatora: Radiators up to 420mm in length can be installed on the bottom and motherboard side. AIO compatibility extends to 420mm/360mm radiators on the M/B side.

Diagram showing fan and radiator mounting locations within the case
Slika: Prekoview of fan and radiator mounting points for optimal cooling.

2.6 Upravljanje kablovima

The dual-chamber design provides ample space in the right chamber for effective cable management. Utilize the numerous anchor points and included Velcro straps/cable ties to ensure a neat and organized setup.

Image highlighting cable management anchor points in the right chamber
Image: Designated anchor points for cable routing and management.

2.7 Instalacija jedinice za napajanje (PSU).

The PSU is typically mounted at the bottom of the chassis. Ensure proper orientation for airflow and secure it with screws.

Fully assembled PC inside the Thermaltake CTE E550 TG case, showing components and RGB lighting
Image: A complete PC build within the CTE E550 TG chassis.

3. Uputstvo za upotrebu

Once all components are installed and secured, and all cables are connected, you can power on your system.

3.1 Uključivanje/isključivanje napajanja

Locate the power button on the top panel of the chassis. Press it once to power on your system. To power off, you can either shut down via your operating system or press and hold the power button for a few seconds.

3.2 Prednji I/O portovi

The top panel provides convenient access to essential input/output ports:

  • 2 x USB 3.0 Type-A porta
  • 1 x USB 3.2 Gen 2 Type-C port
  • HD Audio (priključci za slušalice i mikrofon)

Close-up of the top I/O panel showing USB ports, power button, and audio jacks
Slika: Detaljna view of the top I/O panel with USB 3.0, USB-C, and audio ports.

4. Održavanje

Redovno održavanje pomaže u osiguravanju optimalnih performansi i dugotrajnosti komponenti vašeg računara.

4.1 Čišćenje filtera za prašinu

The CTE E550 TG is equipped with fine removable dust filters at the top, bottom, and right side of the chassis. These filters prevent dust accumulation inside the case and are easily removable for cleaning.

  1. Gently remove the dust filters from their respective locations.
  2. Očistite filtere komprimiranim zrakom, mekom četkom ili ispiranjem vodom (uvjerite se da su potpuno suhi prije ponovne ugradnje).
  3. Reinstall the clean dust filters.

Image showing removable dust filters on the top, bottom, and side of the chassis
Image: Removable dust filters for easy cleaning and maintenance.

4.2 Čišćenje kaljenog stakla

Za čišćenje kaljenih staklenih panela koristite meku krpu koja ne ostavlja dlačice i neabrazivno sredstvo za čišćenje stakla. Izbjegavajte jake hemikalije koje mogu oštetiti staklo ili premaze.

5. Otkrivanje problema

This section addresses common issues you might encounter during or after building your system.

5.1 Sistem se ne uključuje

  • Provjerite je li jedinica za napajanje (PSU) pravilno priključena na zidnu utičnicu i je li prekidač PSU u položaju 'UKLJUČENO'.
  • Verify all power cables from the PSU are correctly connected to the motherboard, CPU, and graphics card.
  • Provjerite je li kabel prekidača za napajanje na prednjoj ploči ispravno spojen na priključak na prednjoj ploči matične ploče.
  • Due to the top-mounted I/O panel, ensure the power button is not accidentally pressed or obstructed.

5.2 Insufficient Cable Length for Peripherals

  • The motherboard's rear I/O ports are oriented upwards in this chassis. You may require longer cables or extension cables for peripherals such as monitors, keyboards, mice, and network connections.
  • Consider using KVM switches or USB hubs with longer integrated cables if multiple extensions are needed.

5.3 Graphics Card Thermal Performance Issues

  • If using a vertically mounted GPU, especially in the 'Floating GPU' orientation, some graphics card cooling apparatuses may not perform optimally.
  • Razmislite o kupoviniasing a high-quality PCIe riser cable if you experience higher-than-expected GPU temperatures in vertical configurations.

5.4 Damaged or Missing Parts

  • If any parts, such as tempered glass panels, arrive scratched or damaged, contact Thermaltake customer support immediately for assistance.

6. Specifikacije

FeatureSpecifikacija
Naziv modelaE550 TG Gravel Sand
Broj modela stavkeCA-1Z8-00MGWN-00
Tip slučajaMid Tower
Kompatibilnost matične pločeATX, Micro-ATX, Mini-ITX, E-ATX (up to 10.6 inches)
MaterijalAluminij, Kaljeno staklo
Dimenzije proizvoda (DxŠxV)20.2 x 21.99 x 10.63 inča
Težina artikla32 funte
I/O portovi2 x USB 3.0, 1 x USB 3.2 Gen 2 Type-C, HD Audio
Vrsta montaže napajanjaBottom Mount
Maksimalna visina hladnjaka procesora166mm
Ograničenje dužine VGA415mm (with radiator), 465mm (without radiator)

6.1 Fan Support List

Diagram and table detailing fan support for 120mm and 140mm fans in various locations
Image: Comprehensive fan support configurations for the chassis.

6.2 Radiator Support List

Diagram and table detailing radiator support for various sizes in different locations
Image: Detailed radiator compatibility for custom liquid cooling and AIO solutions.

7. Garancija i podrška

7.1 Informacije o garanciji

The Thermaltake CTE E550 TG Mid Tower ATX Case comes with a 3-godišnja garancija. This warranty covers manufacturing defects and ensures the product meets quality standards. Please retain your proof of purchase for warranty claims.

7.2 Korisnička podrška

For technical assistance, warranty claims, or inquiries regarding damaged/missing parts, please contact Thermaltake customer support through their official website or the retailer where the product was purchased. Provide your product model number (CA-1Z8-00MGWN-00) and a detailed description of the issue for efficient service.

Možete posjetiti službeni Thermaltake webstranica za resurse podrške: www.thermaltake.com