ECOELER YWT102

ECOELER YWT102 Uputstvo za upotrebu tajmera za odbrojavanje

Model: YWT102

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOELER YWT102 Countdown Timer Switch. This in-wall timer switch is designed to automatically turn off connected loads such as lights, ceiling fans, bathroom fans, and heaters after a preset time, contributing to energy savings and convenience. It features multiple preset countdown options and a manual override function.

ECOELER Countdown Timer Switch (Ivory, 2-Pack)

Image: The ECOELER Countdown Timer Switch in Ivory, shown as a 2-pack.

Karakteristike proizvoda

  • 8 Pre-Set Options: Offers countdown settings of 1 minute, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 2 hours, or 4 hours.
  • Ručno poništavanje: Allows instant ON/OFF control, overriding any active countdown.
  • Ušteda energije: Automatically turns off loads, preventing accidental energy waste. Ideal for lights, ceiling fans, bathroom fans, and heaters.
  • Jednostavna operacija: Features Countdown mode and Constant On mode. Select time with a button press; hold ON/OFF for 5 seconds to activate Constant On.
  • LED indikator: An always-on LED light makes the switch easy to locate in low-light conditions.
  • Široka primjena: Suitable for bathrooms, closets, pantries, garages, laundry rooms, spas, and enclosed patios.
  • Sigurno i pouzdano: ETL listed, supporting LED/CFL, Incandescent (800W), Fluorescent (1200VA) light bulbs, and motors (1/2 HP).
ECOELER Countdown Timer Switch Product Features

Slika: Detaljna view of the ECOELER Countdown Timer Switch buttons and LED indicator labels, highlighting its features.

Sadržaj paketa

Upon opening your ECOELER Countdown Timer Switch package, you should find the following items:

  • ECOELER YWT102 Countdown Timer Switch
  • Matching Wall Plate
  • Žičane matice
  • Upute za instalaciju
ECOELER Countdown Timer Switch Package Contents and Dimensions

Image: The ECOELER Countdown Timer Switch, wire nuts, and face plate, along with product dimensions.

Sigurnosne informacije

UPOZORENJE: To prevent serious injury or death from electric shock, always turn OFF the power at the circuit breaker or fuse box before wiring. This device is intended for installation in accordance with the National Electric Code and local regulations. Use copper wires only. If you are unsure about any part of these instructions, consult a qualified electrician.

Specifikacije

SpecifikacijaVrijednost
BrandECOELER
Broj modelaYWT102
BojaIvory
Dimenzije proizvoda4.19 x 3.71 x 11.99 cm
Snaga/Wattage1800 vati
MaterijalCopper, Metal, Polycarbonate
Težina artikla136 g
Način radaUKLJUČENO ISKLJUČENO
Current Rating15 Amps
Operating Voltage120 volti (AC)
Vrsta kontaktaNormalno otvoren
Tip prekidačaPritisnite dugme
TerminalOžičenje

Instalacija

Follow these steps carefully to install your ECOELER Countdown Timer Switch. If you are not comfortable performing electrical work, please consult a qualified electrician.

Predinstalacija

  1. Isključite napajanje: Locate your circuit breaker panel and turn off the power to the switch box where you will be installing the timer. Verify that the power is off using a voltage tester.
  2. Uklonite postojeći prekidač: Carefully remove the screws holding the existing wall plate and switch. Gently pull the switch out of the wall box.
  3. Identifikujte žice: Identify the wires connected to your existing switch. Typically, you will find:
    • Hot Wire: Usually black, brings power from the circuit breaker.
    • Žica za opterećenje: Usually black or red, carries power to the light/fan.
    • Neutralna žica: Obično bijela. A neutral wire is required for this timer switch.
    • Žica za uzemljenje: Obično zeleni ili goli bakar.

Ožičenje

Connect the wires from the wall box to the ECOELER Countdown Timer Switch as follows:

Wiring diagram for ECOELER Countdown Timer Switch

Image: Wiring diagram for the ECOELER Countdown Timer Switch, illustrating connections for Load (Red), Hot (Black), Ground (Green), and Neutral (White) wires. Note: Neutral Wire Must Be Required.

  1. Povežite Crvena žica from the timer to the Optereti žicu from the wall box using a wire nut.
  2. Povežite Crna žica from the timer to the Vruća žica from the wall box using a wire nut.
  3. Povežite Bijela žica from the timer to the Neutralna žica from the wall box using a wire nut.
  4. Povežite Zelena žica from the timer to the Uzemljena žica from the wall box using a wire nut.

Postinstalacija

  1. Carefully push all wires back into the wall box.
  2. Secure the timer switch to the wall box with the provided screws.
  3. Attach the new wall plate over the timer switch.
  4. Vrati snagu: Return to your circuit breaker panel and turn the power back ON.

Uputstvo za upotrebu

The ECOELER Countdown Timer Switch offers two primary operating modes: Countdown Mode and Constant On Mode.

Način odbrojavanja

To activate a countdown:

  1. Press the desired time button (1 Min, 5 Min, 10 Min, 15 Min, 30 Min, 60 Min, 2 Hour, or 4 Hour).
  2. The corresponding LED indicator will illuminate, and the countdown will begin.
  3. The connected load (light, fan, etc.) will turn off automatically once the selected time expires.
  4. To cancel a countdown manually, press the large ON/OFF button at the bottom.

Constant On Mode (Manual Override)

To keep the connected load continuously ON, bypassing the timer function:

  1. Press and hold the large ON/OFF button at the bottom for more than 5 seconds.
  2. The load will remain ON until the ON/OFF button is pressed again to turn it off.
ECOELER Countdown Timer Switch LED Indicators in Dark

Image: The ECOELER Countdown Timer Switch with its LED indicator illuminated, making it visible in a dark environment.

Održavanje

The ECOELER Countdown Timer Switch requires minimal maintenance. To ensure optimal performance and longevity:

  • Keep the switch and wall plate clean by wiping with a soft, damp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
  • Pazite da prekidač nije izložen prekomjernoj vlazi ili ekstremnim temperaturama.
  • Periodically check the connections for any signs of loosening, though this should only be done with the power turned off at the circuit breaker.

Rješavanje problema

If you encounter issues with your ECOELER Countdown Timer Switch, consider the following:

  • Prekidač ne reaguje: Ensure the power is ON at the circuit breaker. Check all wire connections for tightness.
  • Load Not Turning Off: Verify that the switch is not in Constant On mode (manual override). If it is, press the ON/OFF button to turn it off.
  • LED indikator ne svijetli: Check power supply and connections. If the switch is functioning otherwise, the LED might be faulty, but this is rare.
  • Intermitentni rad: Ensure all wire connections are secure. Loose connections can cause inconsistent performance.

Ako problemi i dalje postoje nakon provjere ovih tačaka, obratite se korisničkoj podršci.

Garancija i podrška

The ECOELER Countdown Timer Switch comes with a 1 godine garancije. For any questions, technical assistance, or warranty claims, please contact ECOELER customer support. You can reach us via email at SUPPORTS@ECOELER.COM. We aim to respond to all inquiries within 24 hours.

Manufacturer: ECOELER ELECTRIC INC

Povezani dokumenti - YWT102

Preview ECOELER YM2108T Prekidač svjetla sa senzorom pokreta Uputstvo za instalaciju i upotrebu
Sveobuhvatni vodič za instalaciju, ožičenje, podešavanje i rješavanje problema sa prekidačem za svjetlo sa senzorom pokreta ECOELER YM2108T. Karakteristike uključuju PIR detekciju, vremensko kašnjenje i postavke nivoa osvetljenosti.