1. Uvod
Thank you for choosing the SilverStone NovaPeak 240 ARGB All-in-one Liquid Cooler. This product is designed to provide efficient cooling for your Intel or AMD processor while offering customizable ARGB lighting effects. This manual provides essential information for proper installation, operation, and maintenance of your liquid cooler.
Image 1.1: SilverStone NovaPeak 240 ARGB Liquid Cooler with two ARGB fans and pump head.
2. Sigurnosne informacije
Please read and understand the following safety precautions before installation and operation:
- Prije instalacije provjerite je li vaš sistem isključen iz napajanja i iskopčan iz zidne utičnice.
- Pažljivo rukujte komponentama kako biste izbjegli oštećenja.
- Do not attempt to open or modify the liquid cooler components.
- Držite proizvod podalje od vlage i ekstremnih temperatura.
- If any leakage is observed, immediately power off your system and contact support.
3. Sadržaj paketa
Provjerite da li su sve komponente prisutne u paketu:
- NovaPeak 240 ARGB Liquid Cooler (Radiator, Pump, Tubing)
- 2x 120mm ARGB Radiator Fans
- Mounting Hardware for Intel LGA 115x/1200/1700/1851/2011/2066 sockets
- Mounting Hardware for AMD AM5/AM4 sockets
- ARGB kontroler
- Termalna pasta
- Uputstvo za upotrebu
4. Vodič za instalaciju
Follow these steps carefully for proper installation. Refer to your motherboard and PC case manuals for specific guidance on component placement.
4.1. Prepare the Radiator and Fans
- Attach the two 120mm ARGB fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically exhausting air out of the case).
- Connect the fan PWM and ARGB cables. The NovaPeak fans feature a modular cabling design for streamlined connectivity, allowing daisy-chaining.
Image 4.1: Fans connected via daisy-chain for simplified cable management.
4.2. Install the Radiator
- Mount the radiator assembly into your PC case. Common mounting locations include the top or front of the case. Secure it with the appropriate screws.
Slika 4.2: Bočna strana view of the radiator with fans attached.
4.3. Prepare the CPU and Pump
- Temeljno očistite površinu procesora kako biste uklonili staru termalnu pastu ili ostatke.
- Apply a small amount of thermal paste (pea-sized dot) to the center of the CPU's integrated heat spreader (IHS).
Image 4.3: The pump's copper baseplate, designed for firm contact with the processor.
4.4. Mount the Pump to the CPU
- Select the appropriate mounting bracket for your CPU socket (Intel or AMD).
- Attach the chosen bracket to the pump head.
- Carefully place the pump head onto the CPU, aligning the mounting holes.
- Secure the pump head to the motherboard using the provided screws and backplate (if required for your socket type). Tighten screws in a diagonal pattern until snug.
4.5. Upravljanje kablovima
- Connect the pump's 3-pin power cable to an available fan header on your motherboard (often labeled 'AIO_PUMP' or 'CPU_OPT').
- Connect the ARGB cables from the fans and pump to the included ARGB controller.
- Connect the ARGB controller to a SATA power connector from your power supply and to a 3-pin 5V ARGB header on your motherboard (if you wish to control lighting via motherboard software).
- Organize all cables to ensure proper airflow and a clean build.
5. Operacija
Once installed, the NovaPeak 240 ARGB Liquid Cooler operates automatically based on your system's thermal load. The pump and fans will adjust their speed to maintain optimal CPU temperatures.
5.1. ARGB kontrola rasvjete
The included ARGB controller allows you to cycle through 10 lighting modes, adjust brightness, and change light speed. Alternatively, if connected to a compatible motherboard ARGB header, you can control the lighting effects using your motherboard's synchronization software.
Image 5.1: Close-up of the pump head showcasing ARGB lighting.
6. Održavanje
Redovno održavanje osigurava optimalne performanse i dugotrajnost vašeg hladnjaka tekućine.
- Čišćenje prašine: Povremeno čistite prašinu s rebara hladnjaka i lopatica ventilatora komprimiranim zrakom ili mekom četkom. Pazite da se ventilatori ne okreću tokom čišćenja.
- Inspekcija cijevi: Visually inspect the tubing for any signs of kinks, damage, or leaks.
- Buka pumpe: The pump is designed for quiet operation. If unusual noises occur, ensure proper mounting and contact support if the issue persists.
7. Otkrivanje problema
Ako naiđete na probleme, pogledajte sljedeće uobičajene probleme i rješenja:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Visoke temperature CPU-a | Improper thermal paste application, loose pump mounting, insufficient airflow, pump failure. | Reapply thermal paste, check pump mounting, ensure fans are correctly oriented, verify pump is powered. |
| Ventilatori se ne okreću / ARGB se ne pali | Incorrect cable connections, faulty ARGB controller, insufficient power. | Check all PWM and ARGB connections, ensure SATA power is connected to the controller, test with different ARGB header if possible. |
| Unusual Pump Noise | Mjehurići zraka u petlji, kvar pumpe. | Orient the radiator higher than the pump if possible to allow air to collect in the radiator. If noise persists, contact support. |
8. Specifikacije
Key technical specifications for the SilverStone NovaPeak 240 ARGB Liquid Cooler:
| Feature | Detalj |
|---|---|
| Broj modela | SST-NP240-ARGB |
| Materijal radijatora | Aluminijum |
| Osnovni materijal pumpe | Bakar |
| Brzina ventilatora | 500 - 2,200 o/min (PWM kontrolirano) |
| Nivo buke | 12.1 dB (minimalno) |
| Kompatibilne utičnice | Intel LGA 115x/1200/1700/1851/2011/2066, AMD AM5/AM4 |
| Dužina cijevi | 460mm |
| Dizajn pumpe | Three-phase, six-pole motor |
Image 8.1: The pump's three-phase, six-pole motor design for smooth and quiet operation.
9. Garancija i podrška
SilverStone Technology provides a limited warranty for this product. Please refer to the official SilverStone website or your product packaging for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please visit the official SilverStone Technology support page or contact their customer service directly. You can find contact information on their webstranica: www.silverstonetek.com
