Scheppach HS254 Stolna pila Uputstvo za upotrebu

Uvod

Thank you for choosing the Scheppach HS254 Table Saw. This powerful and versatile tool is designed for precise cutting of various wood materials, including beams, profile boards, and planks, as well as for longitudinal and miter cuts. Equipped with a 2200 W motor, soft start, and overload protection, it ensures efficient and safe operation.

This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your Scheppach HS254 Table Saw. Please read this manual thoroughly before initial use to ensure proper handling and to maximize the lifespan of your tool. Keep this manual for future reference.

Slika 1: Gotovoview of the Scheppach HS254 Table Saw with its robust stand and extended table surface.

Sigurnosna uputstva

Always observe the following safety precautions to prevent electric shock, fire, and serious injury. Familiarize yourself with all controls and proper use of the machine before operation.

• Lična sigurnost: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and a dust mask. Do not wear loose clothing or jewelry that could get caught in moving parts.
• Sigurnost radnog područja: Održavajte svoje radno mjesto čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
• električna sigurnost: Uvjerite se da napajanje odgovara voltage specified on the tool. Avoid body contact with earthed or grounded surfaces. Do not abuse the cord; never use it for carrying, pulling, or unplugging the power tool.
• Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za vašu primjenu. Isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnog alata.
• Table Saw Specific Safety:
  • Uvijek koristite štitnik za oštricu i razdjelnik.
  • Koristite štap za guranje ili blok za guranje prilikom pravljenja uskih rezova.
  • Never reach over or behind the saw blade.
  • Osigurajte da je radni komad čvrsto poduprt i vođen.
  • Do not remove cut-off pieces until the blade has stopped.
  • Maintain a safe distance from the blade.
• Održavanje: Regularly inspect the saw blade for sharpness and damage. Keep all guards and safety devices in place and in working order.

Sadržaj paketa

Prilikom raspakivanja, provjerite da li su sve komponente prisutne i neoštećene. Ako bilo koji dio nedostaje ili je oštećen, odmah se obratite prodavaču.

• Scheppach HS254 Table Saw unit
• Saw blade (254 mm diameter, 24 teeth)
• Cross-cut gauge
• Longitudinal stop (rip fence)
• Gurni štap
• Table extensions (left and right)
• Okov i alati za montažu (ako je primjenjivo)
• Uputstvo za upotrebu

Postavljanje i montaža

The Scheppach HS254 Table Saw requires some assembly before first use. Follow these steps carefully to ensure proper and safe setup.

1. Raspakivanje: Carefully remove all components from the packaging. Retain packaging materials for potential future transport or storage.
2. Montaža štanda: Assemble the robust steel sheet base according to the provided diagrams. Ensure all bolts are securely tightened for stability.
3. Mounting the Saw Unit: Securely attach the table saw unit to the assembled stand. Verify that it is stable and level.
4. Installing Table Extensions: Attach the table extensions to both sides of the main table. These extensions are crucial for supporting larger workpieces.
5. Instalacija oštrice: If the saw blade is not pre-installed, follow the instructions to securely mount the 254 mm saw blade. Ensure the blade's rotation direction matches the arrow on the saw.
6. Guard and Fence Installation: Install the blade guard, splitter, and both the cross-cut gauge and longitudinal stop (rip fence). Ensure they move freely and lock securely.
7. Priključak za napajanje: Connect the power cable to a suitable 230V AC power outlet. Ensure the power switch is in the "OFF" position before plugging in.

Figure 2: Table extensions installed, allowing for the processing of large workpieces.

Uputstvo za upotrebu

This section details the operation of your Scheppach HS254 Table Saw for various cutting tasks.

1. Uključivanje / isključivanje napajanja

• To turn on the saw, press the green "ON" button. The 2200W motor features a soft start function for smooth power-up.
• Da biste isključili pilu, pritisnite crveno dugme "ISKLJUČENO".
• The saw is equipped with overload protection to prevent damage to the motor. If the motor stops due to overload, turn off the saw, allow it to cool, and reduce the cutting load.

Figure 3: Illustration of the soft start function and blade rotation speed (5300 rpm).

2. Podešavanje visine oštrice

Use the handwheel to comfortably and continuously adjust the saw blade's height. For optimal cutting, the blade should extend slightly above the workpiece.

• Maximum cutting height at 90° is 85 mm.
• Maximum cutting height at 45° is 63 mm.

3. Adjusting Blade Angle (Miter Cuts)

The saw blade can be continuously tilted from 0° to 45° for precise miter cuts.

• Otpustite mehanizam za zaključavanje za podešavanje ugla.
• Use the angle scale to set the desired angle.
• Tighten the locking mechanism securely before cutting.

Figure 4: Adjusting the saw blade for precise miter cuts (0-45°).

4. Using the Rip Fence (Longitudinal Cuts)

The longitudinal stop (rip fence) is used for making accurate parallel cuts along the length of the workpiece.

• Position the rip fence to the desired width using the scale on the table.
• Lock the rip fence firmly in place.
• Always use a push stick when feeding the workpiece, especially for narrow cuts.

Figure 5: Close-up of the rip fence and continuous scale for precise workpiece processing.

5. Using the Cross-Cut Gauge

The cross-cut gauge is adjustable from -60° to +60° and is ideal for precise cross-cuts and angled cuts across the width of the workpiece.

• Insert the cross-cut gauge into the miter slot on the table.
• Adjust the angle as required and lock it.
• Hold the workpiece firmly against the gauge and feed it smoothly through the blade.

Slika 6: Pramples of cuts: beams, profile boards, longitudinal cuts, miter cuts, and general board cuts.

6. Usisavanje prašine

The Scheppach HS254 features an integrated connection for dust extraction. Connect a suitable dust extractor to keep your work area clean and reduce airborne dust.

Održavanje

Redovno održavanje osigurava dugotrajnost i siguran rad vaše stolne pile.

• čišćenje: After each use, disconnect the saw from power and clean off sawdust and debris from the table, blade guard, and motor housing. Use a brush or compressed air.
• Inspekcija oštrice: Regularly check the saw blade for sharpness, missing teeth, or cracks. A dull or damaged blade can cause kickback and poor cut quality. Replace damaged blades immediately.
• podmazivanje: Periodically lubricate moving parts such as the blade height and angle adjustment mechanisms as recommended in the full service manual (if applicable).
• Provjera pričvršćivača: Povremeno provjeravajte zategnutost svih matica, vijaka i šrafova. Zategnite sve labave pričvršćivače.
• Skladištenje: Store the table saw in a dry, secure location, out of reach of children and unauthorized users.

Rješavanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti pri korištenju stolne pile.

Specifikacije

Figure 7: Visual representation of maximum cutting heights at 90° and 45°, and blade tilt range.

Garancija i podrška

Scheppach products are manufactured to high quality standards. In the unlikely event of a defect, please refer to your purchase documentation for warranty details. For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach webstranica za kontakt informacije.

Please have your model number (HS254 / 5901326901) and purchase date available when contacting support.