1. Uvod
This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Makute MS001-S 10-Inch Sliding Compound Miter Saw. Please read this manual thoroughly before operating the tool to ensure proper use and to prevent injury or damage.
The Makute MS001-S is a powerful and versatile tool designed for precision woodworking. It features a robust 2200W motor, a no-load speed of 5000 RPM, and a sliding mechanism for extended cutting capacity. It is suitable for a wide range of cutting tasks, including crosscuts and miter cuts in various materials.
2. Sigurnosna uputstva
Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda. Sačuvajte ovaj priručnik za buduću upotrebu.
- Sigurnost radnog područja: Radno područje održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
- električna sigurnost: Utikači električnih alata moraju odgovarati utičnici. Nikada ne modificirajte utikač ni na koji način. Izbjegavajte kontakt tijela sa uzemljenim površinama. Ne izlažite električne alate kiši ili vlazi.
- Lična sigurnost: Always wear eye protection. Use hearing protection when operating the saw. Dress properly; avoid loose clothing or jewelry. Secure long hair.
- Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za vašu primjenu. Isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnog alata.
- Sigurnost pri radu s ugaonom pilom: Ensure the blade is sharp and clean. Never attempt to cut freehand. Always secure the workpiece with clamps. Keep hands clear of the cutting path. Allow the blade to reach full speed before beginning a cut.
3. Komponente i karakteristike
Familiarize yourself with the various parts of the Makute MS001-S miter saw for safe and effective operation.
Slika 3.1: Sveukupno view of the Makute MS001-S Sliding Compound Miter Saw, showing the main body, blade guard, handle, dust collection bag, and adjustable fence.
Slika 3.2: Bočna strana view of the miter saw, illustrating the robust base and the clear miter angle scale for precise adjustments.
Slika 3.3: Detaljno view of the saw blade area, showing the blade guard, arbor nut, and the 60T blade. This area is critical for blade changes and maintenance.
Slika 3.4: Bočni profesionalacfile of the miter saw, highlighting the motor housing, power cord connection, and the overall compact design for stability.
Figure 3.5: Close-up of a specific control or locking mechanism on the saw, likely related to angle adjustment or slide lock.
Ključne komponente:
- Kućište motora: Sadrži motor od 2200 W.
- Zaštita oštrice: Retracts during cutting to expose the blade and covers it when not in use for safety.
- Handle/Trigger: Ergonomic handle with power trigger and safety lock-off button.
- Stol za ugao: Rotates for miter cuts, with angle indicators.
- Ograda: Pruža potporu radnom komadu i osigurava precizne rezove.
- Klizne šine: Allows the saw head to slide forward and backward for increased cross-cutting capacity.
- Otvor/vreća za sakupljanje prašine: Connects to a dust bag or vacuum system for debris collection.
- Radni komad Clamp: Secures the material being cut to the miter table.
4. Podešavanje
Before first use, ensure the saw is properly assembled and secured.
- Raspakivanje: Pažljivo izvadite sve komponente iz ambalaže. Pregledajte da li ima oštećenja prilikom transporta.
- Montaža: Securely mount the miter saw to a stable workbench using bolts through the base holes. This prevents movement during operation.
- Instalacija lopatice (ako nije prethodno instalirana):
- Provjerite da li je pila isključena iz struje.
- Podignite donji štitnik oštrice.
- Pritisnite dugme za zaključavanje vretena.
- Koristite priloženi ključ za otpuštanje matice osovine.
- Place the blade onto the arbor, ensuring the teeth are pointing downwards towards the front of the saw.
- Čvrsto zategnite maticu osovine.
- Priključak za vrećicu za prašinu: Attach the dust collection bag to the dust port. Ensure it is securely fastened to collect sawdust effectively.
- Početne provjere: Verify all bolts and fasteners are tight. Ensure the blade guard operates smoothly.
5. Uputstvo za upotrebu
Follow these steps for safe and accurate cutting operations.
5.1. Basic Crosscuts
- Pripremite radni komad: Jasno označite liniju rezanja na materijalu.
- Položaj obratka: Place the material firmly against the fence and flat on the miter table.
- Osigurajte radni komad: Koristite radni komad clamp to hold the material securely in place.
- Adjust Saw Head: Ensure the saw head is in the fully retracted position for sliding cuts.
- Početak pile: Press the safety lock-off button and then the trigger to start the motor. Allow the blade to reach full speed (5000 RPM).
- Make Cut: Slowly push the saw head forward through the material. Maintain a steady, controlled motion.
- Potpuni rez: Once the cut is complete, release the trigger and allow the blade to stop spinning before raising the saw head.
5.2. Rezanje pod uglom
- Unlock Miter Table: Otpustite dugme za zaključavanje ugla rezanja.
- Postavi ugao: Rotate the miter table to the desired angle (e.g., 45 degrees) using the angle scale.
- Lock Miter Table: Tighten the miter lock knob to secure the table at the chosen angle.
- Izvršite rezanje: Follow the steps for basic crosscuts (5.1), ensuring the workpiece is firmly against the fence at the new angle.
5.3. Kosi rezovi
The Makute MS001-S supports bevel cuts. Refer to the specific bevel adjustment mechanism on your saw, typically a lever or knob at the rear of the motor housing, to tilt the blade assembly to the desired angle (e.g., 0-45 degrees). Always ensure the bevel angle is securely locked before making a cut.
6. Održavanje
Redovno održavanje osigurava dugotrajnost i siguran rad vaše ugaone pile.
- čišćenje: After each use, unplug the saw and use a brush or compressed air to remove sawdust and debris from the motor vents, blade guard, and miter table.
- Inspekcija oštrice: Redovno provjeravajte oštrinu lista pile da li ima pukotina ili nedostajućih zuba. Odmah zamijenite tupe ili oštećene listove.
- podmazivanje: Povremeno nanesite tanki sloj mašinskog ulja na klizne šine kako biste osigurali nesmetan rad.
- Karbonske četke: Check carbon brushes every few months or if the motor performance decreases. Replace them when they are worn down to approximately 1/4 inch.
- Kabl za napajanje: Pregledajte kabel za napajanje da li ima rezova, istrošenosti ili oštećenja. Zamijenite ga ako je potrebno.
7. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti pri korištenju ugaone pile.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Testera se ne pokreće. | Nema napajanja; neispravan prekidač; istrošene ugljene četkice. | Check power connection and circuit breaker. Test switch. Replace carbon brushes. |
| Oštrica ne reže glatko ili gori drvo. | Dull or dirty blade; incorrect blade for material; forcing the cut. | Replace or clean blade. Use appropriate blade. Do not force the saw. |
| Pretjerane vibracije. | Loose blade; damaged blade; saw not securely mounted. | Zategnite maticu osovine pile. Zamijenite oštećenu pilu. Sigurno pričvrstite pilu na radni stol. |
| Sakupljanje prašine je loše. | Dust bag full or clogged; dust port blocked. | Empty and clean dust bag. Clear any blockages from the dust port. |
8. Specifikacije
Technical specifications for the Makute MS001-S Sliding Compound Miter Saw.
| Specifikacija | Vrijednost |
|---|---|
| Broj modela | MS001-S |
| Power Input | 2200W |
| Brzina bez opterećenja | 5000 RPM |
| Voltage | 220-240V |
| Frekvencija | 50/60Hz |
| Blade Diameter | 10 inča (255 mm) |
| Težina artikla | 13 kg |
| Dimenzije paketa | 58 x 42 x 42 cm |
| Izvor napajanja | Corded Electric |
| Posebne karakteristike | Sklopivi |
9. Garancija i podrška
Makute products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or contact your local Makute dealer or authorized service center.
For technical support, spare parts, or service inquiries, please contact Makute customer service. Ensure you have your model number (MS001-S) and purchase details available when contacting support.
Proizvođač: Makute
