Korisnički priručnik za bežični kontroler ECHTPower

Uvod

Hvala na kupoviniasing the ECHTPower Wireless Controller. This controller is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, PC, Android, and iOS devices. Featuring Hall Effect joysticks for precise control, customizable RGB lighting, programmable back buttons, and adjustable vibration, this manual will guide you through its setup, operation, and maintenance.

Figure 1: ECHTPower Wireless Controller in Classic Gray.

Sadržaj paketa

• 1 x ECHTPower Wireless Controller (Model: ES01GY)
• 1 x USB-C kabel za punjenje
• 1 x Korisnički priručnik (ovaj dokument)

Raspored kontrolera

Slika 2: Prednja strana view of the controller showing buttons and joysticks.

• 1. Left Analog Stick: Hall Effect joystick for precise movement.
• 2. D-Pad: Directional pad for navigation.
• 3. Minus (-) Button: System function button.
• 4. Screenshot Button: Capture in-game screenshots.
• 5. Home Button: Return to the system home screen.
• 6. Plus (+) Button: System function button.
• 7. A/B/X/Y Buttons: Standardni akcijski dugmići.
• 8. Right Analog Stick: Hall Effect joystick for camera control or aiming.
• 9. M Button: Macro programming button.
• 10. Turbo Button: Activate/deactivate turbo function.
• 11. L/R Buttons: Dugmad za ramena.
• 12. ZL/ZR Buttons: Okidački dugmići.
• 13. MR/ML Buttons: Programmable back buttons.
• 14. USB-C Port: Za punjenje i žičanu vezu.

Slika 3: Natrag view of the controller highlighting the MR and ML programmable buttons.

Podešavanje i povezivanje

Punjenje kontrolera

Before first use, fully charge the controller. Connect the included USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., console, PC, USB wall adapter). The LED indicators will show charging status and turn off when fully charged. A full charge provides approximately 10-16 hours of continuous gameplay.

Povezivanje s Nintendo Switchom

1. Iz menija HOME odaberite "Kontroleri" > "Promijeni hvat/redoslijed".
2. Na kontroleru pritisnite i držite Dugme za početak for 3 seconds until the LED indicators start flashing rapidly.
3. Once connected, the corresponding player LED(s) on the controller will light up solid.
4. To wake up the Switch console from sleep mode, press the Dugme za početak na kontroleru.

Note: This controller cannot wake up the Switch2 console.

Figure 4: The controller is compatible with Nintendo Switch and other platforms.

Povezivanje sa računarom (Windows)

• Bežično (Bluetooth):
  1. Provjerite da li je na vašem računaru omogućen Bluetooth.
  2. Na kontroleru pritisnite i držite Dugme za početak for 3 seconds until the LED indicators flash rapidly.
  3. On your PC, go to Bluetooth settings and select "Add device" or "Add Bluetooth or other device".
  4. Select "Bluetooth" and choose "Pro Controller" or "Wireless Controller" from the list.
  5. Once paired, the LED indicators will stop flashing and remain solid.
• Žični (USB-C):
  1. Povežite kontroler sa računarom pomoću USB-C kabla.
  2. The controller will be automatically recognized as a gamepad.

Connecting to Android/iOS Devices

1. Omogućite Bluetooth na svom Android ili iOS uređaju.
2. Na kontroleru pritisnite i držite Dugme za početak for 3 seconds until the LED indicators flash rapidly.
3. On your device, search for Bluetooth devices and select "Pro Controller" or "Wireless Controller" to pair.
4. Once paired, the LED indicators will stop flashing and remain solid.

Uputstvo za upotrebu

Džojstici sa Hall efektom

The controller features advanced Hall Effect joysticks, which use magnetic sensors instead of traditional mechanical contacts. This design significantly reduces stick drift, enhances precision, and increases durability compared to conventional joysticks.

Figure 5: Hall Effect joysticks offer enhanced precision and durability.

RGB podešavanje osvetljenja

The analog sticks are equipped with RGB LED lights that can display 9 different colors. You can customize the lighting effects:

• Režim jedne boje: Pritisnite i držite Dugme za svjetlo (usually located near the back buttons or on the front face) to cycle through the 9 available colors. Release the button to select your desired color.
• Način disanja: Nastavite pritiskati Dugme za svjetlo to activate breathing mode, where colors gradually change.
• Isključite svjetla: Pritisnite i držite Dugme za svjetlo until the lights turn off.

Programmable Back Buttons (MR/ML) and Macro Function

The MR and ML back buttons can be programmed to single buttons or complex macros, providing a competitive edge and reducing hand fatigue.

1. Single Button Assignment:
   1. Pritisnite Dugme M once. The LED indicators will flash slowly.
   2. Press the back button you wish to program (MR or ML). The LED indicators will flash rapidly.
   3. Press the button you want to assign (e.g., A, B, X, Y, L, R, ZL, ZR, D-Pad directions, or analog stick clicks).
   4. Press the back button (MR or ML) again to confirm. The LED indicators will stop flashing.
2. Makro snimanje:
   1. Pritisnite i držite Dugme M for 3 seconds until the LED indicators flash rapidly.
   2. Press the back button you wish to program (MR or ML).
   3. Input the sequence of buttons you want to record (e.g., A, B, X, Y, then release).
   4. Pritisnite Dugme M again to save the macro. The LED indicators will stop flashing.
3. Clear Assignment/Macro:
   1. Pritisnite Dugme M once. The LED indicators will flash slowly.
   2. Press the back button (MR or ML) you want to clear.
   3. Pritisnite Dugme M again. The LED indicators will stop flashing, and the assignment/macro will be cleared.

TURBO Continuous Fire Function

The TURBO function allows for rapid, continuous input of a button press, reducing the need for repeated presses.

1. Activate TURBO: Pritisnite i držite Turbo dugme, then press the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR). The button will now continuously fire as long as you hold it down.
2. TURBO Hold Mode: To activate continuous fire without holding the button, press the Turbo dugme, then press the desired action button, and then press the Turbo dugme again. The button will now continuously fire on its own.
3. Podesite TURBO brzinu: While in TURBO mode, press and hold the Turbo dugme i pomerite Right Analog Stick Up/Down to cycle through 3 different speeds (slow, medium, fast).
4. Deactivate TURBO: Pritisnite i držite Turbo dugme, then press the action button again. Alternatively, press the Turbo dugme and the action button twice to deactivate TURBO Hold mode.

Figure 6: The TURBO function simplifies rapid button presses during gameplay.

Podešavanje vibracija

The controller features 4 levels of vibration intensity to match your preference and game immersion.

• To adjust vibration intensity, press and hold the Turbo dugme i pomerite D-Pad Up/Down.
• The vibration intensity will cycle through 4 levels: None, Low, Medium, High.

Figure 7: The controller's vibration motors provide immersive feedback.

6-osni žiro senzor

The built-in 6-axis gyro sensor allows for precise motion control in compatible games. This feature quickly detects the controller's tilt angle, providing intuitive and responsive gameplay, especially in titles that utilize motion aiming or steering.

Video demonstracija

Održavanje i njega

• Clean the controller regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Izbjegavajte izlaganje kontrolera ekstremnim temperaturama, direktnoj sunčevoj svjetlosti ili visokoj vlažnosti.
• Do not disassemble the controller. This will void the warranty.
• Kontroler čuvajte na sigurnom mjestu kada ga ne koristite kako biste spriječili oštećenja.
• If the controller will not be used for an extended period, charge it at least once every three months to maintain battery health.

Rješavanje problema

Specifikacije

Garancija i podrška

ECHTPower products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or customer service inquiries, please contact ECHTPower customer support through the retailer's platform or visit the official ECHTPower website.

Molimo sačuvajte svoj dokaz o kupovini za zahtjeve u vezi s garancijom.