1. Proizvod je gotovview
The Mxmoonant 9KW 220V Electric Sauna Heater is designed to provide an optimal sauna experience with efficient and even heat distribution. Featuring a built-in digital display control, users can precisely adjust temperature and time settings, ensuring comfort and safety. Constructed with high-quality 840 stainless steel heating elements, this heater offers superior strength and heat resistance for efficient heating of sauna rooms up to 425 cubic feet. Its wall-mounted design saves valuable floor space, enhancing the overall usability of your sauna.
2. Sigurnosne informacije
WARNING: REDUCE THE RISK OF FIRE, ELECTROCUTION, AND BURNS.
- Always consult a licensed electrician for proper wiring installation.
- Do not operate the sauna heater unless the guard is in place.
- Do not install the heater closer than the specified distances to vertical/horizontal surfaces.
- Do not operate without sauna rocks.
- Osigurajte odgovarajuću ventilaciju u prostoriji saune.
- Držite zapaljive materijale dalje od grijača.
- Never pour excessive water onto the hot stones, as this can cause steam burns.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne.
- Mxmoonant 9KW Electric Sauna Heater
- Digital Control Panel (built-in)
- Pribor za montažu (vijci)
- Odvijač
- Sauna Hygrothermograph
- Uputstvo za upotrebu
Note: Sauna stones (30-40 lbs) are required and not included with the product.
4. Instalacija
4.1 Provjere prije instalacije
- Ensure the sauna room size is appropriate for a 9KW heater (250 to 425 cubic feet).
- Verify that the electrical supply is 220V and capable of handling the 9KW load. A 60A circuit breaker is recommended for safe operation.
- The heater does not come with a plug; professional electrical wiring is required.
4.2 Montiranje grijača
The sauna heater is designed for wall-mounting to optimize space. Ensure the mounting location allows for proper clearances from benches and the floor.
4.3 Električno ožičenje
Wiring should be performed by a qualified electrician to ensure compliance with local electrical codes and safety standards. The heater requires a 220V connection.
4.4 Postavljanje kamenja za saunu
Place 30-40 lbs of sauna stones into the heater's stone compartment. Arrange them with sufficient gaps to allow for smooth airflow and efficient heating.
5. Uputstvo za upotrebu
5.1 Digitalna kontrolna tabla
The built-in digital control panel allows for easy adjustment of time and temperature. The time range is 0-180 minutes, and the temperature range is 30-110°C (86-230°F). Real-time temperature monitoring is displayed for convenience.
5.2 Podešavanje vremena i temperature
- Uključeno: Pritisnite dugme za napajanje na kontrolnoj ploči.
- Postavite vrijeme: Use the 'SET' button and 'UP'/'DOWN' arrows to adjust the desired operating time (0-180 minutes).
- Postavljena temperatura: Use the 'SET' button and 'UP'/'DOWN' arrows to adjust the desired temperature (30-110°C / 86-230°F).
- Kontrola svjetla: The control panel may include a button to control the sauna room light.
- The heater will automatically maintain the set temperature until the timer expires.
6. Održavanje
- čišćenje: Regularly wipe down the exterior of the heater with a damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje.
- Kamenje za saunu: Inspect sauna stones periodically for signs of crumbling or wear. Replace any damaged stones to ensure optimal performance and safety.
- ventilacija: Ensure that the sauna room's ventilation system is clear and unobstructed for proper air circulation.
- Električni priključci: Periodically check electrical connections for tightness and signs of wear. This should be done by a qualified technician.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Grijač se ne uključuje | Nema napajanja; prekidač je isključen; neispravno ožičenje. | Check power connection; reset circuit breaker; consult electrician. |
| Sauna not heating sufficiently | Incorrect temperature setting; insufficient sauna stones; poor room insulation; heater undersized for room. | Adjust temperature; add more stones (30-40 lbs recommended); check room insulation; ensure heater matches room volume. |
| Heater makes loud popping noises | Sauna stones settling or expanding due to heat. | This is often normal during initial heating or as stones adjust. Ensure stones are properly placed. |
| Digitalni displej ne radi | Problem sa napajanjem; unutrašnji kvar. | Check power; if problem persists, contact support. |
8. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | 9KW |
| Snaga | 9KW |
| Voltage | 220V |
| Heating Area (Max) | 425 Cu.ft |
| Temperaturni opseg | 30-110°C (86-230°F) |
| Vremenski opseg | 0-180 minuta |
| Grijaći elementi | 840 Nerđajući čelik |
| Dizajn | Montira se na zid |
| Dimenzije proizvoda | 18 x 13 x 21 inča |
| Težina artikla | 28.7 funte |
9. Garancija i podrška
For warranty information, technical support, or any inquiries regarding your Mxmoonant Sauna Heater, please refer to the contact details provided in your product packaging or visit the official Mxmoonant webstranica. Preporučuje se da registrujete svoj proizvod prilikom kupovine kako biste olakšali bilo kakve buduće potrebe za podrškom.
