EGLO 901321

EGLO Fueva 6 LED Ceiling Light Instruction Manual

Model: 901321

Uvod

This manual provides essential information for the safe installation, operation, and maintenance of your EGLO Fueva 6 LED Ceiling Light. Please read these instructions carefully before beginning installation and retain them for future reference.

The EGLO Fueva 6 is a square LED ceiling light designed for indoor use. It features a brushed silver metal frame and a white plastic diffuser, offering adjustable color temperature to suit various lighting needs.

Sigurnosne informacije

Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

Instalacija

Važno: Before proceeding, ensure the power supply to the installation area is turned off at the circuit breaker.

  1. Pripremite montažnu površinu: Identify the desired location on the ceiling. Ensure the surface is clean, dry, and capable of supporting the light fixture's weight.
  2. Access the Color Temperature Switch: Before mounting, locate the color temperature selection switch on the back of the light fixture. This switch allows you to choose between Warm White (2700K), Neutral White (4000K), or Cool White (6500K). Select your preferred setting now, as it will be inaccessible after installation.
  3. Install the Mounting Bracket/Transformer: The light fixture uses a mounting system where the transformer also acts as the mounting bracket. Secure this component to the ceiling using the provided screws. Ensure it is firmly attached.
  4. Spojite uređaj: Connect the household electrical wires to the corresponding wires on the light fixture's transformer. Follow standard wiring practices: live to live, neutral to neutral, and ground to ground. Ensure all connections are secure.
  5. Pričvrstite rasvjetno tijelo: Carefully align the light fixture with the installed mounting bracket/transformer. The connection between the transformer and the light fixture is often via a USB-C type connector or similar, which needs to be precisely centered. Gently push and slide the light fixture onto the bracket until it snaps securely into place. Avoid excessive force to prevent damage to the connection points.
Diagram showing the dimensions of the EGLO Fueva 6 LED Ceiling Light: 22 cm (8.66 inches) length and width, 2.5 cm (0.98 inches) height.

Figure 1: Dimensions of the EGLO Fueva 6 LED Ceiling Light (22x22x2.5 cm)

EGLO Fueva 6 LED Ceiling Light emitting cool white light, mounted on a ceiling.

Figure 2: EGLO Fueva 6 LED Ceiling Light installed, emitting cool white light.

EGLO Fueva 6 LED Ceiling Light emitting warm white light, mounted on a ceiling.

Figure 3: EGLO Fueva 6 LED Ceiling Light installed, emitting warm white light.

Uputstvo za upotrebu

Once installed and power is restored, the EGLO Fueva 6 LED Ceiling Light operates via your standard wall switch. The light will turn on and off with the switch.

Podešavanje temperature boje

The EGLO Fueva 6 allows you to select from three different color temperatures:

To change the color temperature, you must access the switch located on the back of the light fixture. This requires temporarily detaching the fixture from its mounting bracket. Therefore, it is recommended to select your preferred color temperature during installation.

Diagram illustrating different color temperatures: Warm White (<3300K), Neutral White (3300K-5000K), and Cool White (>5000K), with descriptions of their typical uses.

Figure 4: Color Temperature Options and Their Applications

Održavanje

The EGLO Fueva 6 LED Ceiling Light requires minimal maintenance.

Rješavanje problema

ProblemMogući uzrokRješenje
Svjetlo se ne pali.Nema napajanja.
Slabo ožičenje.
Neispravan zidni prekidač.
Proverite prekidač.
Provjerite da li su svi spojevi žica sigurni (prvo isključite napajanje).
Testirajte zidni prekidač.
Svjetlo je previše slabo ili previše svijetlo.Incorrect color temperature setting for desired ambiance.Adjust the color temperature switch on the back of the fixture (requires temporary removal).
Svetlo treperi.Labavo ožičenje.
Incompatible dimmer switch (if applicable, though this model is not specified as dimmable).
Faulty LED driver.
Provjerite spojeve ožičenja (prvo isključite napajanje).
Ensure no dimmer switch is used unless explicitly stated as compatible.
Contact customer support if flickering persists.
Difficulty mounting the fixture.Misalignment of the fixture with the mounting bracket/transformer.
Fragile connection points.
Ensure precise alignment of the fixture with the mounting bracket. Apply gentle, even pressure when snapping into place. Avoid forcing the connection.

Specifikacije

Informacije o garanciji

EGLO products are manufactured to high-quality standards. Specific warranty terms and conditions are typically provided with your purchase documentation or can be found on the official EGLO webMolimo sačuvajte dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.

Korisnička podrška

For technical assistance, replacement parts, or further inquiries, please contact EGLO customer service. Contact details can usually be found on the EGLO official webweb stranici ili na ambalaži vašeg proizvoda.

Službenik EGLO-a Webstranica: www.eglo.com