HYTE LS30 qRGB svjetlosne trake - uputstvo za upotrebu

1. Uvod

The HYTE LS30 qRGB Light Strips are designed to enhance your setup with immersive digital LED lighting. Featuring a 62-pixel qRGB array and 24-bit color depth, these 1000mm strips offer wide compatibility and flexible integration. They connect sequentially via HYTE Nexus Link to primary nodes like the Nexus Portal NP50 or THICC Q60, enabling extensive ARGB LED control on a single channel. This manual provides essential information for the proper installation, operation, and maintenance of your LS30 light strips.

2. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• HYTE LS30 qRGB Light Strips (2x 1000mm strips)
• Neodymium Magnets (pre-embedded in strips)
• Adhesive Strips (for alternative mounting)
• Nexus Link Type-C Connection Cables

Slika 2.1: The image displays the HYTE LS30 qRGB Light Strips, coiled, alongside their retail packaging and connection cables. This illustrates the items typically included in the product package.

3. Specifikacije

Key technical specifications for the HYTE LS30 qRGB Light Strips:

4. Postavljanje i instalacija

The HYTE LS30 qRGB Light Strips require a HYTE Nexus Portal NP50 or THICC Q60 primary node for connection and power. Ensure you have one of these devices available before proceeding.

4.1. Connecting the Light Strips

1. Identify Primary Node: Locate an available Nexus Link Type-C port on your HYTE Nexus Portal NP50 or THICC Q60.
2. Connect First Strip: Take one LS30 light strip and connect its Type-C cable to a Nexus Link Type-C port on your primary node.
3. Sequential Connection: If installing multiple LS30 strips, connect the second strip to the available Type-C port on the prvo LS30 strip. This allows for seamless sequential connection of multiple strips and other Nexus Link compatible devices like fans.

Slika 4.1: This image shows a close-up of the Nexus Link Type-C connector, highlighting the connection point for the light strips to the primary node or other sequential devices.

4.2. Mounting the Light Strips

The LS30 strips offer versatile mounting options:

• Magnetni dodatak: The strips feature 21 embedded Neodymium magnets. Simply place the strip onto any ferrous metal surface within your PC case or setup. The magnets provide a strong and secure hold.
• Ljepljive trake: For non-metallic surfaces, use the included adhesive strips. Peel off the protective backing and firmly press the light strip onto the desired clean, dry surface.

Slika 4.2: An LS30 light strip is shown installed inside a PC case, secured by its magnetic clips to a metal frame. This demonstrates the magnetic mounting capability.

Slika 4.3: This image provides an example of the LS30 light strip installed vertically inside a computer case, casting vibrant colors onto the internal components and fan. It illustrates the visual effect of the installed strip.

5. Operacija

Once connected to a compatible HYTE Nexus Link primary node (NP50 or THICC Q60), the LS30 qRGB Light Strips are controlled via the HYTE Nexus software. This software allows for comprehensive customization of lighting effects and colors.

5.1. Software Control

• Download HYTE Nexus Software: Visit the official HYTE website to download and install the latest version of the HYTE Nexus software.
• Prepoznavanje uređaja: Upon launching the software, your connected LS30 light strips should be automatically detected.
• Prilagodba: Use the software interface to select from various lighting modes, adjust colors, brightness, and create custom lighting profiles. The 24-bit color depth allows for a wide range of vibrant and dynamic effects.

5.2. Upravljanje glasom

The HYTE LS30 qRGB Light Strips are compatible with voice control methods when integrated with the HYTE Nexus ecosystem. Refer to the HYTE Nexus software documentation for specific instructions on enabling and configuring voice commands for your lighting.

6. Održavanje

To ensure the longevity and optimal performance of your HYTE LS30 qRGB Light Strips, follow these simple maintenance guidelines:

• čišćenje: Gently wipe the surface of the light strips with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the LEDs or the strip's material.
• Uklanjanje prašine: Periodically use compressed air to remove dust accumulation from the light strips and surrounding areas, especially if installed inside a PC case.
• Upravljanje kablovima: Ensure that connection cables are not kinked, pinched, or under excessive tension, which could lead to damage over time.

7. Otkrivanje problema

If you encounter issues with your HYTE LS30 qRGB Light Strips, refer to the following common problems and solutions:

• Svjetla ne svijetle:
  • Provjerite veze: Ensure all Nexus Link Type-C cables are securely connected to the primary node (NP50/THICC Q60) and between sequential strips.
  • Napajanje: Verify that your primary node is receiving adequate power and is properly connected to your system.
  • Software Status: Open the HYTE Nexus software to confirm that the light strips are detected and not disabled. Check for any error messages within the software.
• Netačne boje ili efekti:
  • Postavke softvera: Review your lighting profiles and settings in the HYTE Nexus software. Ensure the correct effects are selected for the LS30 strips.
  • Ažuriranje softvera: Make sure your HYTE Nexus software is up to date. Outdated software can sometimes cause display inconsistencies.
  • Ponovo sinhroniziraj: Try re-syncing or re-detecting devices within the HYTE Nexus software.
• Povremeno osvjetljenje:
  • Integritet kabla: Inspect all Nexus Link cables for any visible damage or loose connections.
  • Fluktuacija snage: Ensure your system's power supply is stable and providing consistent power to the primary node.

If these steps do not resolve the issue, please contact HYTE customer support for further assistance.

8. Informacije o garanciji

The HYTE LS30 qRGB Light Strips are covered by a 3-godišnja garancija proizvođača. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, including how to file a warranty claim, please refer to the official HYTE website or contact HYTE customer support.

9. Korisnička podrška

For additional support, technical assistance, or to access the latest software and drivers, please visit the official HYTE webTamo obično možete pronaći često postavljana pitanja, vodiče za rješavanje problema i kontakt informacije za korisničku podršku.

HYTE Official Webstranica: hyte.com