UIBI X3 & X7 Jump Starter with Air Compressor User Manual

1. Uvod

Thank you for choosing the UIBI X3 or X7 Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a high-performance tire inflator, a portable power bank, and an emergency LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and charging needs on the go.

This manual will guide you through the proper use, maintenance, and troubleshooting of your UIBI jump starter. Please read it thoroughly before first use to ensure safe and optimal performance.

2. Sigurnosne informacije

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle.

• Pročitajte sva uputstva: Before operating the jump starter, read and understand all safety information and operating instructions.
• Zaštita očiju: Uvijek nosite zaštitne naočale pri radu s baterijama.
• ventilacija: Ensure adequate ventilation when jump starting a vehicle.
• Sprječavanje iskri: Avoid creating sparks near the battery. Do not smoke or allow open flames near the battery or jump starter.
• polaritet: Spojite clamps with correct polarity. Connecting incorrectly can cause damage to the device, battery, or vehicle.
• Djeca i kućni ljubimci: Držite uređaj van domašaja djece i kućnih ljubimaca.
• Skladištenje: Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Oštećeni uređaj: Do not use the device if it is damaged, cracked, or leaking.
• Punjenje: Only charge the device using the provided charging cable and a compatible adapter.
• Izloženost vodi: Ne izlažite uređaj kiši ili vlažnim uslovima.

3. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• UIBI X3 or X7 Jump Starter
• Smart Jumper kablovi
• Air Hose with Nozzles (for various inflatables)
• USB-C kabl za punjenje
• Torbica za pohranu
• Uputstvo za upotrebu

Slika 3.1: UIBI X3 and X7 Jump Starters shown with all included accessories, including smart jumper cables, air hose, various nozzles, and charging cables, neatly organized in their storage cases.

4. Proizvod je gotovview

Familiarize yourself with the components of your UIBI jump starter.

Slika 4.1: The UIBI X3 model, highlighting its digital display for battery level and pressure, and the control buttons for jump start, air compressor, and LED light functions.

Slika 4.2: The UIBI X7 model, featuring its larger digital display for real-time pressure and battery status, along with intuitive control buttons for various modes.

Ključne komponente:

• Digitalni prikaz: Shows battery level, air pressure (PSI, BAR, KPA, Kg/cm²), and operational modes.
• Dugme za napajanje: Uključuje/isključuje uređaj.
• Dugme za način rada (M): Switches between air compressor modes (e.g., car, motorcycle, bicycle, ball).
• +/- dugmad: Adjusts target air pressure.
• Port za pokretanje: For connecting smart jumper cables.
• Priključak za crijevo za zrak: For connecting the air hose.
• USB-A Output (QC3.0): Za punjenje elektronskih uređaja.
• Type-C PD45W Input/Output: For charging the jump starter and charging electronic devices.
• LED bljeskalica: Provides illumination, strobe, and SOS signals.

5. Podešavanje

Prije prve upotrebe, provjerite je li startni uređaj potpuno napunjen.

5.1 Početno punjenje

1. Connect the provided USB-C charging cable to the Type-C PD45W port on the jump starter.
2. Drugi kraj USB-C kabla priključite na kompatibilni USB adapter za zidnu utičnicu (nije uključen).
3. The digital display will show the charging progress. Charge until the battery indicator shows full.

Slika 5.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output.

A full charge typically takes approximately 2 hours with a PD45W charger.

6. Operating Instructions (Jump Starter)

Follow these steps to safely jump start your vehicle.

1. Pripremite vozilo: Turn off the vehicle's ignition and all accessories (headlights, radio, A/C). Engage the parking brake.
2. Connect Jumper Cables to Jump Starter: Insert the blue plug of the smart jumper cables into the jump start port on the UIBI device. Ensure a firm connection.
3. Connect Clamps do baterije:
   • Povežite CRVENA (+) clamp to the pozitivno (+) terminal akumulatora vozila.
   • Povežite CRNI (-) clamp to the negativno (-) terminal akumulatora vozila.

   The smart jumper cables will beep if an incorrect connection is detected. Correct the connection before proceeding.
4. Pokrenite vozilo: Jednom clamps are correctly connected and the indicator on the smart cable is solid green (or as per cable indicator), start your vehicle's engine.
5. Uklonite Clamps: Once the vehicle starts, immediately remove the BLACK (-) clamp first, then the RED (+) clamp from the battery. Disconnect the smart jumper cables from the UIBI device.

Slika 6.1: The UIBI X7 Jump Starter connected to a car battery, demonstrating the proper setup for jump-starting a vehicle. The display shows '8.8.8' indicating readiness.

Slika 6.2: The UIBI X3 Jump Starter connected to a car battery, illustrating the connection of the smart clamps to the battery terminals for a quick and safe jump start.

Napomena: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

7. Air Compressor Operation

The UIBI jump starter features a built-in air compressor for inflating tires and other inflatables.

1. Spojite crijevo za zrak: Screw the air hose into the air hose port on the jump starter.
2. Pričvrstite mlaznicu: Select the appropriate nozzle for your item (e.g., Schrader valve for car tires, needle for balls) and attach it to the end of the air hose.
3. Uključeno: Press the Power button to turn on the device. The display will show the current pressure.
4. Odaberite način rada (opcionalno): Press the 'M' (Mode) button to cycle through preset inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode has a default pressure, which can be adjusted.
5. Postavite ciljani pritisak: Koristite dugmad '+' i '-' da biste podesili željeni pritisak.
6. Početak inflacije: Press the Power button again to start the air compressor. The display will show the real-time pressure.
7. Automatsko isključivanje: Kompresor će se automatski zaustaviti kada se dostigne unaprijed postavljeni pritisak.
8. Prekini vezu: Unscrew the air hose from the item and the jump starter.

Slika 7.1: The UIBI X7 Jump Starter actively inflating a car tire, demonstrating its cordless air compressor function. The display shows the current PSI reading.

Slika 7.2: The UIBI X3 Jump Starter in use, inflating a car tire. This image highlights the multi-use air pump feature with auto-stop functionality.

8. Funkcija prenosne baterije

The UIBI jump starter can charge your electronic devices.

1. Povežite uređaj: Use a compatible USB cable (not included) to connect your smartphone, tablet, or other electronic device to either the USB-A (QC3.0) output port or the Type-C PD45W port on the jump starter.
2. Uključeno: Press the Power button on the jump starter to activate the charging function.
3. Punjenje: Your device will begin charging. The jump starter's display may show its remaining battery level.

Slika 8.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output, allowing it to function as a portable power bank.

9. Funkcija LED svjetla

The integrated LED flashlight offers three modes for various situations.

1. Uključi: Press and hold the LED light button (often integrated with the power button or a dedicated button) to turn on the flashlight.
2. Promjena načina rada: Briefly press the LED light button repeatedly to cycle through the modes:
   • Stabilno svjetlo: Za opšte osvjetljenje.
   • Strobe svjetlo: Za signaliziranje ili privlačenje pažnje.
   • SOS signal: For emergency situations, emitting the Morse code SOS pattern.
3. Isključi: Press and hold the LED light button again to turn off the light.

Slika 9.1: The UIBI X7 Jump Starter demonstrating its emergency LED light, capable of providing stable illumination, strobe, and SOS signals for various situations.

10. Punjenje uređaja

To ensure your UIBI jump starter is always ready, recharge it after each use or when the battery level is low.

• Connect the provided USB-C charging cable to the Type-C PD45W input port on the jump starter.
• Connect the other end of the USB-C cable to a USB wall adapter (e.g., 5V/2A, 9V/2A, or PD45W compatible).
• The digital display will indicate the charging status. Charge until the battery icon shows full.
• It is recommended to fully charge the device every 3-6 months even if not in use to maintain battery health.

11. Održavanje

Proper maintenance will extend the life of your UIBI jump starter.

• čišćenje: Obrišite uređaj mekom, suhom krpom. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.
• Skladištenje: Store the device in its carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Održavanje baterije: Recharge the device every 3-6 months to prevent deep discharge and prolong battery life.
• Inspekcija kablova: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

12. Otkrivanje problema

Ako naiđete na probleme, pogledajte sljedeće uobičajene probleme i rješenja.

Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se korisničkoj podršci.

13. Specifikacije

14. Garancija i podrška

UIBI products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the warranty card included in your package or visit the official UIBI website. If you have any questions or require assistance, do not hesitate to contact our customer service team.