1. Uvod
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Monport 100W MOPA Fiber Laser Engraver with Rotary Axis. Please read this manual thoroughly before operating the machine.
The Monport 100W MOPA Fiber Laser Engraver is an advanced marking machine designed for high-precision engraving and marking on various materials, including metals and certain plastics. It features an autofocus system, a 6.9" x 6.9" work area, and a rotary axis for cylindrical objects.
2. Sigurnosna uputstva
WARNING: Laser radiation can cause severe injury. Always follow safety precautions.
- Uvijek nosite odgovarajuće zaštitne naočale za laser prilikom rada sa mašinom.
- Ensure the work area is well-ventilated to remove fumes and dust generated during engraving.
- Nikada ne gledajte direktno u laserski snop ili u njegove refleksije.
- Keep flammable materials away from the laser work area.
- Do not operate the machine if any covers are removed or safety interlocks are bypassed.
- Uverite se da je mašina pravilno uzemljena.
- Upoznajte se s postupkom zaustavljanja u nuždi.
Image: Control panel of the Monport laser engraver, highlighting the laser switch, laser power switch, and the location of the built-in filter for safety and maintenance.
3. Postavljanje i instalacija
The Monport 100W MOPA Fiber Laser Engraver is designed for quick and easy setup. Follow these steps for initial installation:
- Raspakivanje: Carefully remove all components from the packaging. Verify all parts listed in the packing list are present.
- Vertical Arm Installation: The vertical arm is foldable for shipping. To install, position the arm onto the base unit. Align the mounting holes and secure it with the provided screws. Tighten the screws firmly but do not overtighten.
- Priključak za napajanje: Connect the power cable to the machine and a grounded electrical outlet.
- Instalacija softvera: Install the provided BSL (Free) or LightBurn (Paid) software on your computer. Refer to the software-specific instructions for detailed installation steps.
- Rotacijska osa (opciono): If using the rotary axis, connect it according to the separate rotary axis manual.
Image: Step-by-step guide for installing the vertical arm of the laser engraver, demonstrating how to unfold and secure it to the base.
Image: The Monport laser engraver connected to a computer, illustrating compatibility with Windows operating systems and software like BSL App and LightBurn.
4. Uputstvo za upotrebu
4.1 Osnovni rad
- Uključeno: Turn on the main power switch on the machine.
- Pokretanje softvera: Launch the engraving software (BSL or LightBurn) on your computer.
- Položaj materijala: Place the material to be engraved on the work platform. Ensure it is stable and correctly positioned.
- Automatsko fokusiranje: The machine features one-button autofocus. Press the "FOCUS" button on the control panel. The laser head will automatically adjust its height to achieve optimal focus. Manual focus is also available using the "UP" and "DOWN" buttons, guided by three red lights.
- Design Import and Settings: Import your design into the software. Adjust laser parameters such as power, speed, frequency, and pulse width according to the material and desired effect.
- Započni graviranje: Initiate the engraving process from the software. Monitor the process closely.
Slika: Prekoview of the Monport laser engraver, highlighting its 100W MOPA laser source, autofocus feature, and 175x175mm (6.9x6.9 inch) marking area.
4.2 Korištenje rotacijske ose
The rotary axis allows for engraving on cylindrical or irregularly shaped objects. To use it:
- Install the rotary axis as per its dedicated manual.
- Mount the cylindrical object securely onto the rotary axis chuck.
- Adjust the vertical arm for optimal working height. The arm offers a ±90° rotation for flexible positioning. Loosen the screws, adjust the angle, and re-tighten.
- In the software, enable and configure the rotary axis settings.
- Proceed with autofocus and engraving as described in Basic Operation.
Image: The laser engraver's vertical arm adjusted to a rotated position, allowing for engraving on a cylindrical object, showcasing its flexibility.
4.3 Material Compatibility and Effects
The Monport 100W MOPA Fiber Laser is suitable for a wide range of materials and effects:
- metali: Stainless steel, aluminum, gold, silver, alloy, steel, jewelry. Capable of color marking on stainless steel and anodized aluminum black engraving.
- Nemetali: Ceramic, marble, leather, plastics, colored acrylic.
- Efekti: Precise cutting, drilling, intricate designs, vibrant color markings.
Image: Technical specifications of the 100W laser source, detailing its frequency range (1-3000kHz), pulse width (2-500ns), beam diameter (7±1mm), and max pulse energy (1.5mJ), along with its extended service life.
Image: The Monport laser engraver demonstrating its capability to create vibrant color markings, shown with a colorful butterfly design on a workpiece.
5. Održavanje
Redovno održavanje osigurava optimalne performanse i produžava vijek trajanja vašeg laserskog gravera.
- čišćenje: Regularly clean the work area, lens, and mirrors with a soft, lint-free cloth and appropriate cleaning solution.
- Filter za prašinu: Check and clean or replace the built-in dust filter periodically to maintain proper ventilation and prevent dust accumulation inside the machine.
- Inspekcija kablova: Pregledajte sve kablove i spojeve na istrošenost ili oštećenja.
- Ažuriranja softvera: Keep your engraving software updated to the latest version for new features and bug fixes.
6. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema laserskog izlaza | Laser switch off, power cable loose, software error. | Ensure laser switch is on. Check power connections. Restart software and machine. |
| Loš kvalitet graviranja | Incorrect focus, wrong parameters, dirty lens. | Perform autofocus. Adjust laser power/speed. Clean the lens. |
| Mašina se ne povezuje sa računarom | Problem s USB kablom, drajver nije instaliran, softver ne prepoznaje uređaj. | Check USB cable. Reinstall drivers. Verify software device settings. |
| Rotary axis not rotating | Incorrect connection, software not configured for rotary axis. | Check rotary axis connection. Enable and configure rotary axis in software. |
7. Specifikacije
- Brand: Monport
- Broj modela: YXF100
- Vrsta lasera: 100W MOPA vlaknasti laser
- Radna oblast: 175 x 175 mm (6.9" x 6.9")
- Automatsko fokusiranje: One-button autofocus (error < ±1mm)
- Vertical Arm Rotation: ±90° adjustable
- Max Marking Speed: Do 10000 mm/s
- Veličina spota: 0.01mm ultra-fine spot
- Frekvencija lasera: 1-3000kHz
- Pulsna širina: 2-500ns
- Prečnik grede: 7±1 mm
- Max Pulse Energy: 1.5mJ
- Materijal: Aluminum (casing)
- Način rada: Automatski
- Kompatibilnost softvera: BSL (Free), LightBurn (Paid)
- Uključeno: Mopa AF Fiber Laser Engraver with Rotary Axis
8. Garancija i podrška
For warranty information and technical support, please refer to the official Monport website or contact Monport customer service directly. Keep your purchase receipt for warranty claims.
Monport Customer Service: Monport Store on Amazon
9. Videozapisi proizvoda
Monport Autofocus Fiber Laser Overview
Video: Prekorview of the Monport Autofocus Fiber Laser, demonstrating its key features and capabilities, including quick installation, autofocus innovation, and flexible vertical arm rotation.
Monport Fiber Laser Engraver in Action
Video: This video showcases the Monport Fiber Laser Engraver performing various marking tasks, including engraving on a ring and a metal bottle, demonstrating its precision and versatility.
