Fender Bassman Delay pedala Model 0234612000 Uputstvo za upotrebu

1. Proizvod je gotovview

The Fender Bassman Delay Pedal is an effects unit designed for bass instruments, drawing inspiration from Fender's Bassman amplifier line. It features meticulously crafted analog and digital circuits for bass-centric tonal expansion. The pedal offers two professional DSP algorithms specifically engineered to repeat bass signals, allowing users to select between smooth analog repeats or crisp digital delay tones. Controls for time and feedback determine the delay duration and number of repeats. A 'low' switch allows shaping the low-frequency presence in delay repeats, enabling users to either keep the low end clear by fading repeats lightly or duplicate the full signal for more pronounced effects.

• Bass-tuned analog and digital delay DSP algorithms with analog dry-through.
• Low switch for sculpting low frequency presence in delay repeats.
• Internal high cut and low cut controls for fine-tuning delay repeat frequency content.
• Soft-touch switchable true or buffered bypass with trails.
• Side-mounted pad switch for compatibility with active basses.

Slika 1.1: Front view of the Fender Bassman Delay Pedal. This image displays the pedal's control layout, including the Time, Feedback, and Level knobs, along with the Type and Low toggle switches, and the footswitch.

2. Podešavanje

Follow these steps to properly set up your Bassman Delay Pedal:

1. Priključak za napajanje: Connect a 9-volt DC power supply (not included) to the "9V DC IN" jack located on the top of the pedal. Ensure the power supply is center-negative.
2. Ulazni priključak: Connect your bass guitar or other instrument to the "IN" jack using a standard 1/4-inch instrument cable.
3. Izlazna veza: Connect the "OUT" jack to your amppojačavač ili sljedeću pedalu u vašem signalnom lancu koristeći standardni instrumentalni kabel od 1/4 inča.
4. Pad prekidač: If you are using an active bass with a high output, engage the side-mounted pad switch to prevent signal clipping and ensure optimal performance. This switch is located on the side of the pedal.

Slika 2.1: Top view of the Fender Bassman Delay Pedal, showing the "IN" and "OUT" 1/4-inch audio jacks and the "9V DC IN" power input.

3. Operacija

The Bassman Delay Pedal features intuitive controls for shaping your delay effects:

• Dugme VRIJEME: Adjusts the delay time, controlling the interval between repeats.
• Dugme za povratne informacije: Kontrolira broj ponavljanja odgode. Veće postavke rezultiraju većim brojem ponavljanja.
• Dugme LEVEL: Sets the volume of the delay repeats relative to your dry signal.
• TYPE prekidač: Toggles between two distinct delay algorithms:
  • analogni: Provides warm, smooth, and decaying repeats characteristic of vintaganalogne jedinice za kašnjenje.
  • digitalno: Offers crisp, clear, and precise repeats.
• LOW Switch: Modifies the low-frequency content of the delay repeats.
  • Gore pozicija: Reduces low frequencies in the repeats, keeping the bass signal clear and preventing muddiness.
  • Donja pozicija: Allows the full frequency range of the signal to be repeated, suitable for beat-repeat effects or when a fuller delay sound is desired.
• nožni prekidač: Engages or bypasses the delay effect. This pedal features a soft-touch switchable true or buffered bypass with trails, meaning repeats can naturally decay even after the effect is disengaged if trails mode is active (internal setting).

Slika 3.1: Ugao view of the Fender Bassman Delay Pedal, highlighting the control knobs and toggle switches for Time, Feedback, Level, Type, and Low.

Internal Controls (High Cut and Low Cut)

The Bassman Delay Pedal includes internal high cut and low cut controls. These are trim pots located inside the pedal enclosure and are intended for advanced users to fine-tune the frequency content of the delay repeats beyond what the external LOW switch offers. Accessing these controls requires opening the pedal, which should be done with care to avoid damaging components.

4. Održavanje

To ensure the longevity and optimal performance of your Bassman Delay Pedal:

• čišćenje: Za čišćenje vanjske strane pedale koristite meku, suhu krpu. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: Čuvajte pedalu na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Veze: Povremeno provjeravajte sve kablovske spojeve na istrošenost ili oštećenja. Zamijenite oštećene kablove kako biste spriječili gubitak signala ili šum.
• Napajanje: Always use a compatible 9V DC center-negative power supply. Incorrect power can damage the unit.

5. Otkrivanje problema

If you encounter issues with your Bassman Delay Pedal, consider the following:

• Nema zvuka:
  • Provjerite da li su svi kablovi (ulazni, izlazni, napajni) sigurno spojeni.
  • Verify the power supply is functioning and correctly connected (9V DC, center-negative).
  • Provjerite da li vaš instrument i ampLifier radi ispravno.
  • Ensure the pedal's footswitch is engaged.
• Slab ili izobličen zvuk:
  • Check the LEVEL knob setting; it might be too low or too high.
  • If using an active bass, ensure the side-mounted pad switch is engaged.
  • Pregledajte kablove na oštećenja.
• Delay Not Apparent:
  • Check the TIME and FEEDBACK knob settings; they might be set too low.
  • Provjerite da li je pedala pritisnuta.
• Pretjerana buka:
  • Pobrinite se da koristite regulirano napajanje.
  • Provjerite ima li uzemljenih petlji u vašoj instalaciji.
  • Try isolating the pedal from other electronics.

If problems persist, consult the Fender support resources.

6. Specifikacije

7. Garancija i podrška

This Fender product is covered by a manufacturer's warranty. For detailed warranty information, product registration, or technical support, please refer to the official Fender webstranicu ili direktno kontaktirajte Fender korisničku službu. Sačuvajte račun kao dokaz o kupovini.

Za dalju pomoć posjetite Fender Support Page.