SKYEAR G40-M Endoscope Camera with Light User Manual

1. Uvod

This manual provides detailed instructions for the SKYEAR G40-M Endoscope Camera with Light. This device is designed for visual inspection in hard-to-reach areas, offering a clear view with its 4.3-inch HD 1080P IPS screen and an 8mm camera probe. Equipped with a 16.4ft (5m) semi-rigid cable and 8 adjustable LED lights, it is suitable for various applications including automotive repair, industrial mechanical inspection, pipe and sewer inspection, and household HVAC appliance checks. The camera probe is IP67 waterproof, allowing for use in damp ili vlažnom okruženju.

Figure 1: SKYEAR G40-M Endoscope Camera with Light and included accessories.

2. Sigurnosne informacije

Please read all safety warnings and instructions before using this product to ensure safe operation and prevent damage to the device or injury.

• električna sigurnost: Do not attempt to open or modify the device. Ensure the charging cable and port are dry before charging.
• Otpornost na vodu: The camera probe and cable are IP67 waterproof, meaning they can withstand submersion up to 1 meter for 30 minutes. The main display unit is NOT waterproof. Do not submerge the main unit in water or expose it to heavy rain.
• temperatura: Avoid using or storing the device in extreme temperatures. Operating temperature range is typically 0°C to 45°C (32°F to 113°F).
• Rukovanje sondom: Handle the semi-rigid cable and camera probe with care. Avoid sharp bends or excessive force that could damage internal wiring.
• Sigurnost baterije: The device contains a rechargeable Lithium Polymer battery. Do not expose the battery to high temperatures, puncture, or disassemble it. Dispose of batteries according to local regulations.
• Namjena: This device is for inspection purposes only. Do not use it for medical examinations or any other unintended applications.

3. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• SKYEAR G40-M Endoscope Camera (Main Unit with 4.3" IPS Screen)
• 16.4ft (5m) Semi-Rigid Camera Cable with 8mm Probe
• USB kabel za punjenje tipa C
• Accessories: Hook, Magnet, Side Mirror
• Korisnički priručnik (ovaj dokument)

Figure 2: The SKYEAR G40-M Endoscope Camera and its components as typically packaged.

Figure 3: Included accessories: hook, magnet, and side mirror, designed to attach to the camera probe.

4. Proizvod je gotovview

The SKYEAR G40-M Endoscope Camera consists of a handheld display unit and a flexible camera probe. The display unit features a 4.3-inch IPS screen for clear viewing and intuitive control buttons. The camera probe is equipped with an 8mm lens, 8 adjustable LED lights, and is connected via a 16.4ft semi-rigid cable.

4.1. Main Unit Controls and Ports

Figure 4: Layout of the main unit's buttons and ports.

• Dugme za napajanje: Pritisnite i držite da uključite ili isključite uređaj.
• Dugme za resetiranje: Koristi se za resetovanje uređaja ako prestane da reaguje.
• Tip-C priključak za punjenje: Za punjenje interne baterije.
• LED Adjustment "+" / "-": Increases or decreases the brightness of the camera's LED lights.
• Enhance Sharp Contrast: Adjusts image contrast for better detail.
• Reduce Sharp Contrast: Decreases image contrast.
• Zoom In / Zoom Out: Magnifies or reduces the on-screen image.
• Black and White Mode: Toggles between color and black and white display.
• To Rotate: Rotates the image 180 degrees.
• Vrati postavke: Resets display settings to default.

4.2. Camera Probe and Cable

The camera probe features an 8mm diameter lens with 8 adjustable LED lights for illumination. The 16.4ft (5m) semi-rigid cable allows for flexible maneuvering while maintaining its shape for precise positioning. The probe is IP67 waterproof.

Figure 5: The camera probe with 8 adjustable LED lights and its short lens design for navigating narrow spaces.

Figure 6: Illustration of the advanced camera technology, highlighting the 1080P CMOS sensor for enhanced image clarity.

5. Podešavanje

5.1. Punjenje uređaja

1. Locate the Type-C charging port on the main unit (refer to Figure 4).
2. Connect the provided USB Type-C cable to the device and the other end to a standard USB power adapter (not included).
3. The charging indicator will illuminate. A full charge typically takes approximately 2.5 hours and provides up to 4 hours of operation.

Figure 7: Battery specifications, including 2200mAh capacity, 4 hours battery life, and 2.5 hours charging time.

5.2. Attaching the Camera Probe

The camera cable is pre-attached to the main unit. Ensure the connection is secure before use.

5.3. Pričvršćivanje dodatne opreme (opciono)

The hook, magnet, and side mirror accessories can be attached to the tip of the camera probe for specific tasks.

1. Carefully slide the desired accessory onto the camera probe tip until it is firmly seated.
2. Ensure the accessory does not obstruct the camera lens or LED lights.

6. Uputstvo za upotrebu

6.1. Uključivanje/isključivanje

• Uključeno: Press and hold the Power Button (refer to Figure 4) for a few seconds until the screen illuminates.
• Iskljuciti: Press and hold the Power Button again until the screen turns off.

6.2. Podešavanje LED svjetala

The camera probe features 8 adjustable LED lights to illuminate dark inspection areas.

• Use the "LED Adjustment +" button to increase brightness.
• Use the "LED Adjustment -" button to decrease brightness.
• Adjust the brightness to achieve optimal visibility without glare.

Figure 8: Various brightness settings for the 8 LED lights on the camera probe.

6.3. Screen and Image Controls

Figure 9: The 4.3-inch IPS screen offers a wide 178-degree viewing angle and high-definition picture quality.

• Rotacija slike: Press the "To Rotate" button to flip the image 180 degrees, useful when navigating in confined spaces.
• Funkcija zumiranja: Use the "Zoom In" and "Zoom Out" buttons to magnify or reduce the view on the screen. The device supports multiple magnification levels (e.g., 1.0x, 1.3x, 1.5x).

Slika 10: Prample of available zoom levels for detailed inspection.

• Podešavanje kontrasta: Use the "Enhance Sharp Contrast" and "Reduce Sharp Contrast" buttons to fine-tune image clarity.
• Black and White Mode: Press the "Black and White Mode" button to switch the display to monochrome, which can sometimes improve visibility in certain conditions.
• Vrati postavke: If display settings become undesirable, press the "Restore Settings" button to revert to factory defaults.

6.4. Obavljanje inspekcije

1. Uvjerite se da je uređaj napunjen i uključen.
2. Carefully insert the camera probe into the area to be inspected. The semi-rigid cable allows you to guide the probe.
3. Adjust the LED brightness for optimal viewing.
4. Observe the live feed on the 4.3-inch IPS screen. Use zoom and rotation functions as needed.
5. The camera has a macro focus range of 1-10 cm. Position the camera within this range for clear images.
6. For retrieving small objects, attach the hook or magnet accessory. For viewing at an angle, use the side mirror.
7. After inspection, carefully retract the camera probe.

Slika 11: Pramples of common applications for the endoscope camera, including automotive, plumbing, and HVAC inspections.

7. Održavanje

Proper maintenance ensures the longevity and optimal performance of your SKYEAR G40-M Endoscope Camera.

• Čišćenje objektiva kamere: After each use, especially in dirty or wet environments, gently wipe the camera lens with a soft, lint-free cloth. For stubborn dirt, use a small amount of lens cleaning solution. Do not use abrasive materials.
• Čišćenje kabla: Wipe the semi-rigid cable with a damp cloth to remove any debris. Ensure the cable is dry before coiling for storage.
• Čišćenje glavne jedinice: Use a dry, soft cloth to clean the display unit. Avoid using liquids directly on the unit.
• Skladištenje: Store the endoscope camera in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the cable loosely to prevent damage.
• Održavanje baterije: If the device will not be used for an extended period, charge the battery to approximately 50% before storage and recharge every 3-6 months to maintain battery health.

Figure 12: The IP67 waterproof camera probe is designed for use in wet conditions, but proper cleaning after use is essential.

8. Otkrivanje problema

If you encounter issues with your SKYEAR G40-M Endoscope Camera, refer to the following common problems and solutions:

9. Specifikacije

10. Garancija i podrška

For warranty information and customer support, please refer to the documentation provided with your purchase or contact SKYEAR customer service directly. Details regarding warranty periods and service procedures are typically available on the manufacturer's official webweb-mjestu ili putem vašeg prodavača.