Monport 30W Fiber Laser Engraver Instruction Manual

1. Važne informacije o sigurnosti

Before operating the Monport 30W Fiber Laser Engraver, read and understand all safety instructions. Failure to follow these instructions may result in serious injury or property damage.

• Zaštita očiju: Always wear appropriate laser safety glasses (OD 6+ at 1064nm) when the laser is in operation. Direct exposure to the laser beam can cause permanent eye damage.
• ventilacija: Operate the machine in a well-ventilated area to dissipate fumes and particles generated during engraving. Some materials may produce hazardous fumes.
• Kompatibilnost materijala: This machine is designed for marking metals such as stainless steel, gold, silver, brass, and certain plastics. Do not engrave unknown materials or materials that may produce toxic fumes or catch fire, such as PVC.
• Protivpožarna sigurnost: Keep a fire extinguisher nearby. Do not leave the machine unattended during operation.
• električna sigurnost: Ensure the machine is properly grounded. Do not operate with damaged cables or if the machine shows signs of malfunction.
• Hitno zaustavljanje: Familiarize yourself with the location and function of the emergency stop button. In case of any emergency, press this button immediately to cut power to the laser.
• klasa lasera: This device is a Class 1 laser product when fully enclosed and operated as intended. However, the internal laser source is Class 4. Exercise extreme caution during maintenance or when covers are removed.

2. Proizvod je gotovview

The Monport 30W Fiber Laser Engraver is a precision marking and etching machine designed for various metal and select non-metal materials. It features a Raycus fiber laser source, offering a long operational lifetime and high marking speed.

Figure 2.1: Monport 30W Fiber Laser Engraver with its control unit.

Ključne karakteristike:

• 30W Raycus Fiber Laser Source: Provides stable and reliable laser output with an estimated lifetime of up to 100,000 hours. Suitable for marking most metals.
• Integrirani dizajn: Features two cooling fans for improved heat dissipation and an integrated power supply for enhanced stability.
• Pojednostavljene kontrole: Combines three original power buttons into one, along with an added panic button for immediate shutdown.
• Advanced Workspace: Equipped with a built-in workspace grid and removable positioning bars for precise material placement. Supports an optional rotary axis (not included) for cylindrical objects.
• Red Dot Locator: An external red dot locator assists in quick and accurate laser focus setup.
• Ručno fokusiranje: A focus-height wheel allows for precise manual adjustment of the laser focus, aided by a vertical supporting tower with a ruler for convenient height measurements.

Figure 2.2: Labeled components of the Monport Fiber Laser Marking Machine, including the GALVO-TECH System, Height Adjustment Knob, Handle, Field lens, Power Button, Fiber optic transmission line, Scaleplate, and Worktable.

3. Upute za postavljanje

Follow these steps to set up your Monport 30W Fiber Laser Engraver.

3.1 Otpakivanje i pregled

1. Pažljivo izvadite sve komponente iz pakovanja.
2. Inspect the machine for any signs of damage during transit. Contact customer support immediately if any damage is found.
3. Provjerite da li je prisutan sav pribor naveden na listi za pakovanje.

3.2 Machine Placement

• Place the laser engraver on a stable, level surface capable of supporting its weight (approximately 33.5 kg).
• Ensure adequate space around the machine for ventilation and safe operation.

3.3 Električni priključak

• Spojite kabel za napajanje na uređaj, a zatim na uzemljenu električnu utičnicu. Osigurajte da jetage matches the machine's requirements (typically 110V or 220V, check machine label).
• The machine features an upgraded button design for ease of use and safety.

Figure 3.1: The upgraded button design includes a Key Switch for security, a Power Button for operation, and an Emergency Button for immediate shutdown.

3.4 Software Installation (Lightburn)

• Install the Lightburn software on your computer. Refer to the Lightburn documentation for detailed installation instructions.
• Connect the laser engraver to your computer via the provided USB cable.
• Ensure your operating system (Windows 7/8/10/11 or MacOS) is compatible.

Figure 3.2: The Monport fiber laser machine is compatible with MacOS, Windows 7, Windows 8, Windows 10, and Windows 11.

4. Uputstvo za upotrebu

This section outlines the basic steps for operating your Monport 30W Fiber Laser Engraver.

4.1 Uključivanje

1. Umetnite ključ u prekidač ključa i okrenite ga u položaj ON.
2. Press the green power button. The machine will power on, and the cooling fans will start.

4.2 Material Placement

• Place your material on the worktable. Use the built-in grid and removable positioning bars for accurate alignment.
• For cylindrical objects, attach the optional rotary axis (if applicable) and secure the object.

4.3 Fokusiranje lasera

Accurate focusing is crucial for optimal engraving results.

1. Activate the red dot locator in your software or via the machine controls. Two red dots will appear on your material.
2. Rotate the manual focus-height wheel to adjust the height of the laser head.
3. Adjust until the two red dots converge into a single, sharp point on the surface of your material. Use the ruler on the vertical supporting tower for reference.

4.4 Preparing and Starting an Engraving Job

1. Open Lightburn software and import or create your design.
2. Configure laser parameters (power, speed, frequency, passes) according to your material and desired effect. Refer to Lightburn documentation and material test guides for recommended settings.
3. Use the 'Frame' function in Lightburn to preview the engraving area with the red dot locator, ensuring correct placement.
4. Ensure all safety precautions are in place (eye protection, ventilation).
5. Click 'Start' in Lightburn to begin the engraving process.

4.5 Isključivanje

1. Once the engraving job is complete, wait for the machine to cool down.
2. Pritisnite dugme za napajanje da isključite mašinu.
3. Turn the key switch to the OFF position and remove the key for security.

5. Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vašeg laserskog gravera.

5.1 Čišćenje objektiva

• The field lens is a critical component. Keep it clean and free of dust and debris.
• Use a specialized lens cleaning solution and lint-free wipes designed for optical components.
• Never touch the lens surface with bare hands.

5.2 Generalno čišćenje

• Regularly clean the work area and the exterior of the machine to prevent dust and debris accumulation.
• Ensure the cooling fan vents are clear and unobstructed to maintain proper airflow.

5.3 Ažuriranja softvera

• Periodically check for updates to the Lightburn software to benefit from new features and bug fixes.

6. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti i nudi osnovna rješenja.

6.1 Laser ne okida

• Provjerite snagu: Ensure the machine is powered on, the key switch is in the ON position, and the power button is pressed.
• Hitno zaustavljanje: Verify that the emergency stop button is not engaged. Twist it clockwise to release if it is.
• Softverska veza: Confirm that Lightburn is connected to the machine and the job is properly sent.
• Parametri lasera: Check if the laser power setting in Lightburn is set above 0%.

6.2 Poor Engraving Quality

• Fokus: Re-check the laser focus. An out-of-focus laser will produce blurry or weak engravings.
• Postavke materijala: Adjust laser power, speed, and frequency settings in Lightburn. Different materials and desired effects require specific parameters. Perform test engravings on scrap material.
• Čistoća sočiva: A dirty lens can scatter the laser beam, leading to poor quality. Clean the lens as described in the Maintenance section.
• Material Stability: Ensure the material is securely placed and does not move during engraving.

6.3 Machine Not Responding to Software

• USB veza: Ensure the USB cable is securely connected to both the machine and the computer. Try a different USB port or cable.
• Instalacija drajvera: Verify that the necessary drivers for the laser engraver are correctly installed on your computer.
• Ponovno pokretanje softvera: Close and restart Lightburn.
• Ponovno pokretanje računara: Ponovo pokrenite računar.

7. Specifikacije

Detailed technical specifications for the Monport 30W Fiber Laser Engraver (Model YXF30).

Figure 7.1: Product dimensions and weight for the Monport Fiber Laser Engraver.

8. Garancija i podrška

For warranty information and technical support, please refer to the official Monport website or contact Monport customer service directly. Keep your purchase receipt and product serial number handy when contacting support.

You can visit the Monport store for more information: Monport Store on Amazon