Waveshare ESP32-S3 7-inch Capacitive Touch LCD Development Board User Manual

1. Uvod

The Waveshare ESP32-S3 7-inch Capacitive Touch LCD Development Board is a versatile microcontroller development platform. It integrates an Xtensa 32-bit LX7 dual-core processor, supporting 2.4GHz Wi-Fi and Bluetooth 5 (LE). This board features an 800x480 resolution, 65K color capacitive touch display, making it suitable for Human-Machine Interface (HMI) and various ESP32-S3 applications. It includes onboard 8MB PSRAM and 8MB Flash memory, along with multiple peripheral interfaces for expanded functionality.

Figure 1.1: Waveshare ESP32-S3 7-inch Capacitive Touch LCD Development Board.

2. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• ESP32-S3-Touch-LCD-7 Development Board x1
• HY2.0 2P to 2PIN male cable 10cm x2
• HY2.0 2P to 3PIN male cable 10cm x1
• HY2.0 2P to 4PIN male cable 10cm x2

Slika 2.1: Sadržaj paketa.

3. Ključne karakteristike

• procesor: Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.
• Bežična povezanost: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antenna.
• Memorija: Built-in 512KB SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash.
• Prikaz: 7-inch capacitive touch display with 800x480 resolution and 65K colors.
• Kontrola dodirom: 5-point capacitive touch control via I2C interface with interrupt support.
• Periferni interfejsi: Onboard CAN, RS485, I2C interface, TF card slot, and full-speed USB port.
• Upravljanje napajanjem: Supports flexible clock and module power supply independent setting for low power consumption.

Slika 3.1: Gotovoview of Board Features.

4. Tehničke specifikacije

Figure 4.1: Outline Dimensions of the Display.

Figure 4.2: Outline Dimensions of the Development Board.

5. Onboard Components and Interfaces

The board is designed with various components and interfaces to facilitate development. Refer to the diagram below for component identification:

Figure 5.1: Onboard Components and Interfaces.

1. ESP32-S3N8R8: The System-on-Chip (SoC) with Wi-Fi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and Flash.
2. 7-inch display panel connector: Connects to the main display.
3. Touch panel connector: Connects to the touch overlay of the display.
4. Utor za TF karticu: For external storage via a MicroSD card.
5. USB Type-C port: Za napajanje i prenos podataka.
6. UART1 Port: Universal Asynchronous Receiver/Transmitter port 1.
7. UART2 connector: Universal Asynchronous Receiver/Transmitter port 2. UART1 and UART2 share the same UART, selected by a switch.
8. Sensor header: For connecting various sensors.
9. CAN header: Controller Area Network interface.
10. I2C header: Inter-Integrated Circuit interface.
11. RS485 header: Recommended Standard 485 interface.
12. 3.7V single lithium battery PH2.0 header: For connecting a 3.7V lithium battery.
13. CAN terminal resistor selection: Jumper for enabling/disabling CAN bus termination resistor.
14. RS485 terminal resistor selection: Jumper for enabling/disabling RS485 bus termination resistor.
15. UART selection: Switch to select between UART1 or UART2.
16. Dugme za pokretanje sistema: Press and hold while powering on for program burning.
17. Dugme RESET: Resets the ESP32-S3 module.
18. I2C level selection: Jumper for selecting 3.3V / 5V I2C logic levels.
19. GOTOVO: Lithium battery charging completed indicator.
20. CHG: Lithium battery charging indicator.
21. PWR: Indikator napajanja.

6. Početno podešavanje

To begin using your Waveshare ESP32-S3 7-inch Capacitive Touch LCD Development Board, follow these general steps:

1. Connect the Display: Ensure the 7-inch display panel and touch panel connectors are securely attached to their respective headers on the main board.
2. Napajanje: Connect the board to a power source using the USB Type-C port. Alternatively, a 3.7V lithium battery can be connected to the PH2.0 header.
3. Instalacija drajvera: Depending on your operating system, you may need to install a USB-to-UART driver for the serial communication chip (e.g., CH340/CP210x). Refer to the Waveshare product wiki for specific driver information.
4. Development Environment Setup: Install your preferred Integrated Development Environment (IDE), such as Arduino IDE or Visual Studio Code with the ESP-IDF extension.
5. Obtain Sample kod: Download the official Waveshare demo code and libraries from their product wiki. These resources provide a starting point for understanding the board's functionalities.
6. Otpremi firmver: Connect the board to your computer via the USB Type-C cable. Follow the instructions provided in the Waveshare documentation or your chosen IDE to compile and upload firmware to the ESP32-S3 module.

7. Uputstvo za upotrebu

The ESP32-S3-Touch-LCD-7 board is designed for various applications, particularly those requiring a graphical user interface. Here are general operating guidelines:

7.1 Human-Machine Interface (HMI) Development

This board is ideal for creating interactive HMI applications. The 7-inch capacitive touch screen allows for intuitive user interaction. Developers can design custom interfaces using graphical libraries like LVGL.

7.2 LVGL GUI Development

LVGL (Light and Versatile Graphics Library) is a popular open-source graphics library compatible with this board. It provides tools and widgets for creating rich graphical user interfaces with low memory requirements. Refer to the LVGL documentation and Waveshare's exampza detalje implementacije.

Figure 7.1: Application Scenarios.

7.3 Peripheral Expansion

Utilize the onboard headers (CAN, RS485, I2C, Sensor) to connect external modules and expand the board's functionality. Ensure proper wiring and power supply for connected peripherals.

Figure 7.2: Multiple Peripheral Support.

8. Održavanje

To ensure the longevity and optimal performance of your development board, observe the following maintenance guidelines:

• Rukovanje: Handle the board with care, avoiding static discharge. Use anti-static precautions when working with electronic components.
• čišćenje: Keep the board and display clean. Use a soft, dry cloth to wipe dust. For the screen, use a screen-specific cleaner if necessary, applied to the cloth, not directly to the screen.
• Skladištenje: Store the board in a dry, cool environment, away from direct sunlight, extreme temperatures, and humidity.
• Snaga: Always use a stable and appropriate power supply. Avoid over-voltage ili veze obrnutog polariteta.
• Veze: Ensure all cable connections are secure but do not apply excessive force when connecting or disconnecting.

9. Otkrivanje problema

If you encounter issues with your ESP32-S3-Touch-LCD-7 board, consider the following troubleshooting steps:

• Ploča se ne uključuje:
  • Verify the USB Type-C cable is correctly connected to a functional power source.
  • If using a battery, ensure it is charged and properly connected to the PH2.0 header.
  • Check the PWR indicator LED on the board.
• Displej ne radi:
  • Ensure the display panel connector is firmly seated.
  • Confirm that the firmware uploaded includes display initialization code.
• Ekran na dodir ne reagira:
  • Check the touch panel connector.
  • Verify that the I2C interface for the touch controller is correctly configured in your code.
  • Ensure the I2C level selection jumper is set appropriately (3.3V/5V).
• Unable to Upload Firmware:
  • Install the correct USB-to-UART drivers for your operating system.
  • Ensure the USB Type-C cable is a data-capable cable, not just a charging cable.
  • Try pressing and holding the BOOT button while connecting the USB cable or initiating the upload process, then release.
  • Verify correct COM port selection in your IDE.
• Problemi s Wi-Fi/Bluetooth povezivošću:
  • Check your code for correct Wi-Fi/Bluetooth initialization and credentials.
  • Ensure the onboard antenna is not obstructed.

For more detailed troubleshooting and specific error codes, refer to the official Waveshare product wiki and community forums.

10. Garancija i podrška

For information regarding product warranty, technical support, and additional resources, please visit the official Waveshare website. The product wiki for the ESP32-S3-Touch-LCD-7 board often contains detailed documentation, schematics, sample code, and FAQs that can assist with development and issue resolution.

Proizvođač: Waveshare

Webstranica: www.waveshare.com