1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of the VIMIN 10-Port Gigabit PoE Switch. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
2. Proizvod je gotovview
2.1 Ključne karakteristike
- 10 gigabitna porta: 8 Power over Ethernet (PoE+) ports and 2 Gigabit uplink ports.
- PoE+ Standard: Supports IEEE 802.3af/at, providing up to 30W per port with a total power budget of 120W. Passive PoE is not supported.
- AI Watchdog Mode: Automatically detects and restarts unresponsive PoE-powered devices.
- One-Key VLAN: Isolates PoE ports (1-8) from each other for enhanced network security while maintaining communication with uplink ports.
- Produženi prijenos: Supports data transmission up to 250 meters at 10Mbps.
- Robusna zaštita: Features 4KV lightning protection for device and network safety.
- Izdržljiv dizajn: Sturdy metal casing for enhanced longevity and heat dissipation.
- Višenamjenska instalacija: Suitable for desktop or wall-mounted placement.
Slika 1: Prednja strana view of the VIMIN 10-Port Gigabit PoE Switch, illustrating its 8 PoE+ ports, 2 uplink ports, 120W total power, 1000Mbps data transfer rate, and 6KV lightning protection.
2.2 Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- 1 x VIMIN 10-Port Gigabit PoE Switch (Model: VM-0E020GP)
- 1 x kabl za napajanje
- 1 x Uputstvo za upotrebu
2.3 Fizički opis
The switch features 8 PoE+ ports (1-8) and 2 Gigabit uplink ports (9-10). It includes a built-in power supply and DIP switches for advanced functions.
Slika 2: Detaljno view of the switch's front panel, indicating PoE ports (1-8) and uplink ports (9-10), along with a rear view showing the integrated power supply.
Image 3: Visual representation of the switch's physical attributes, including its metal casing, plug-and-play setup, 6KV lightning protection, and wall-mounting capability.
3. Podešavanje
3.1 Povezivanje napajanja
- Connect the provided power cable to the power input on the back of the switch.
- Uključite drugi kraj kabla za napajanje u standardnu utičnicu naizmenične struje.
- The Power (PWR) indicator on the front panel will illuminate, indicating the switch is receiving power.
3.2 Povezivanje mrežnih uređaja
- Connect PoE-compatible devices (e.g., IP cameras, wireless access points, VoIP phones) to ports 1-8 using Ethernet cables. These ports will provide both data and power.
- Connect non-PoE devices (e.g., routers, NVRs, computers) to the uplink ports 9-10 using Ethernet cables. These ports are for data transmission only.
- Uvjerite se da su svi kablovi sigurni.
Image 4: Illustration of the switch's compatibility with various devices and its power delivery capabilities, including 30W per port and a 120W total power budget.
4. Uputstvo za upotrebu
The VIMIN 10-Port Gigabit PoE Switch is a plug-and-play device. Basic operation requires no configuration. Advanced features can be enabled using the DIP switches located on the front panel.
4.1 Understanding DIP Switch Modes
The switch features a set of DIP switches (labeled 1-4) to activate specific functions:
- DIP Switch 1: LPP Ring & BSP Broadcast Storm Protection
When enabled, this feature provides ring protection and broadcast storm protection. If a network link is disrupted, the switch automatically reroutes traffic to maintain network operation. - DIP Switch 2: Extend 250m
Enables extended transmission mode, allowing data to be transmitted up to 250 meters. In this mode, the data rate for ports 1-8 is reduced to 10Mbps. - DIP Switch 3: VLAN
Activates VLAN port isolation. Ports 1-8 are isolated from each other, preventing direct communication between them, but they can still communicate with the uplink ports (9-10). This enhances network security and optimizes bandwidth. - DIP Switch 4: AI Watchdog
Enables AI Watchdog mode. The switch monitors PoE-powered devices on ports 1-8. If a device becomes unresponsive or loses connection, the switch automatically restarts power to that port, restoring functionality.
Image 5: Explanation of the LPP (Loop Protection Protocol) and BSP (Broadcast Storm Protection) feature, demonstrating how ring protection ensures continuous network operation.
Image 6: Illustration of the 250m extended transmission mode, detailing the reduced speed of 10Mbps over longer distances.
Image 7: Visual explanation of VLAN port isolation, demonstrating how ports 1-8 are segmented for security while maintaining uplink connectivity.
4.2 Activating DIP Switch Functions
To activate a specific function, move the corresponding DIP switch to the 'ON' position. To deactivate, move it to the 'OFF' position. It is recommended to adjust DIP switches when the switch is powered off to avoid potential network disruptions.
5. Održavanje
- čišćenje: Za čišćenje vanjske strane prekidača koristite meku, suhu krpu. Ne koristite tekuća ili aerosolna sredstva za čišćenje.
- ventilacija: Ensure the ventilation holes on the switch are not obstructed to prevent overheating.
- Okruženje: Koristite prekidač na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti, izvora topline i prekomjerne vlage.
- Upravljanje kablovima: Keep network cables organized and free from kinks or excessive bends to ensure optimal performance.
6. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema lampice indikatora napajanja | Kabl za napajanje nije priključen ili je utičnica neispravna. | Provjerite priključak kabla za napajanje. Pokušajte s drugom utičnicom. |
| Device connected to PoE port is not receiving power or data | Device is not PoE compatible (IEEE 802.3af/at). Greška kabla. Total power budget exceeded. AI Watchdog mode needs to reset the device. | Ensure device supports IEEE 802.3af/at. Test with a different Ethernet cable. Check total power consumption of connected devices. Verify AI Watchdog is enabled or manually restart the switch. |
| Network devices cannot communicate with each other (on ports 1-8) | VLAN mode is enabled. | Check DIP Switch 3. If VLAN is enabled, ports 1-8 are isolated. Disable VLAN mode if direct communication is required. |
| Slow network speed for devices on ports 1-8 | Extend 250m mode is enabled. | Check DIP Switch 2. If extended mode is enabled, speed is reduced to 10Mbps. Disable if not needed for long-distance connections. |
| Intermittent network connection | Labave veze kablova. Smetnje u okolini. LPP/BSP feature not enabled. | Ensure all cables are securely connected. Relocate the switch away from strong electromagnetic sources. Consider enabling LPP/BSP for network redundancy. |
7. Specifikacije
| Feature | Opis |
|---|---|
| Broj modela | VM-0E020GP ([NEW]10 Port | 8xPoE+120W | 2xUPLink) |
| Broj portova | 10 (8 PoE+ ports, 2 Uplink ports) |
| PoE standard | IEEE 802.3af / at |
| PoE Izlaz snage | Do 30W po portu |
| Ukupni budžet PoE napajanja | 120W |
| Brzina prijenosa podataka | 10/100/1000Mbps (gigabit) |
| Extended Transmission | Up to 250m at 10Mbps (via DIP switch) |
| Interface Type | PoE, RJ45 |
| Voltage | 48 volti (DC) |
| Materijal kućišta | Metal |
| Zaštita od groma | 4KV |
| Dimenzije (D x Š x V) | 11.46 x 9.96 x 2.64 inča |
| Težina artikla | 2.07 funte |
| Boja | Crna |
| UPC | 790885295874 |
| Proizvođač | VIMIN |
| Kompatibilni uređaji | Desktop, Gaming console, Router, Printer, Laptop, Camera |
8. Garancija i podrška
8.1 Informacije o garanciji
VIMIN products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or contact VIMIN customer support.
8.2 Tehnička podrška
For technical assistance or inquiries, please contact our support team:
- Email: support@vimintech.com
- Our professional technical team is available to provide high-quality service.
