SUNLU PETG Filament 1.75mm 10KG Bundle Instruction Manual

1. Introduction to SUNLU PETG Filament

SUNLU PETG (Polyethylene Terephthalate Glycol) filament combines the best characteristics of both PLA and ABS 3D printer filaments. It offers the ease of use found in PLA, alongside the durable strength and impact resistance typically associated with ABS. This makes it a versatile material suitable for a wide range of 3D printing applications.

Image: PETG filament combines the advantages of both ABS (durable strength, high toughness, heat resistance) and PLA (easy to use, good stability, high precision).

2. Značajke proizvoda

• PETG Filament Advantages: Combines the benefits of PLA (easy to use) and ABS (durable strength).
• 1.75mm Filament Diameter: Dimensional accuracy of +/- 0.02mm ensures wide compatibility with most 1.75mm FDM 3D printers.
• SUNLU Neat Spool Design: Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". Designed to fit many FDM 3D printers.
• Individually Vacuum-Sealed: Each 1kg spool is individually vacuum-sealed with desiccant to prevent moisture absorption and ensure optimal print quality.

Image: Demonstrating the strong bending strength, high durability, and good toughness of SUNLU PETG filament.

Image: Visual comparison showing SUNLU PETG filament results in less stringing for smoother prints compared to other brands.

3. Setup: Assembling the Refill Spool

The SUNLU PETG filament comes as a refill, designed to be used with a reusable spool. Follow these steps to properly assemble your filament onto the spool:

1. Odvojite stranice kalema: Pažljivo razdvojite dvije polovine kalema za višekratnu upotrebu.
2. Prepare the Refill: Unpack the new filament refill. NE uklanjajte plastične trake holding the filament together at this stage.
3. Ubacivanje rezervne niti: Place one side of the spool onto the refill filament. Ensure the positioning hole on the refill aligns with the notch on the spool hub.
4. Kombinujte polovine kalema: Align the triangular marks on both sides of the spool and press them together firmly. Rotate one side clockwise until it clicks and locks into place.
5. Uklonite plastične trake: Once the spool is securely assembled, carefully remove the plastic straps from the filament.
6. Ensure Tightness: Press the filament hard to ensure it is close to the spool, leaving no gap between the filament and the spool.

Image: Visual instructions for reel conversion and packaging sizes, illustrating how to load the refill filament.

4. Operating Instructions: Recommended Print Settings

For optimal results with SUNLU PETG filament, we recommend the following print settings. These are general guidelines and may require slight adjustments based on your specific 3D printer model and environmental conditions.

• Temperatura mlaznice: 240-260°C
• Temperatura kreveta: 65-75°C
• Brzina štampanja: 50-200 mm/s

Image: Recommended print settings for PETG filament, including nozzle temperature, heated bed temperature, and printing speed.

5. Održavanje

Proper maintenance of your filament ensures consistent print quality and extends its lifespan:

• Skladištenje: Always store unused filament in its original vacuum-sealed packaging or in an airtight container with desiccant. This prevents moisture absorption, which can lead to printing issues like stringing and bubbling.
• Sušenje: If you suspect your filament has absorbed moisture (e.g., it produces popping sounds during printing, excessive stringing, or poor layer adhesion), consider drying it using a filament dryer or a low-temperature oven according to PETG drying guidelines.

Image: Demonstrating flawless printing with SUNLU PETG due to low moisture content, preventing bubbles and clogs.

6. Otkrivanje problema

Encountering issues during printing is common. Here are some tips for common problems with PETG filament:

• Excessive Stringing: PETG can be prone to stringing. Try reducing your print temperature in 5°C increments, increasing retraction distance, or increasing retraction speed. Ensure your filament is dry.
• Slabo prianjanje slojeva: If layers are not bonding well, increase your print temperature slightly (5°C increments) or slow down your print speed. Ensure your bed temperature is within the recommended range and that your print surface is clean and properly prepared.
• Iskrivljenje: Ensure your heated bed is at the recommended temperature and consider using an enclosure for your printer to maintain a stable ambient temperature.

Image: Illustrates excellent layer adhesion, showing tight bonding between layers for a perfect print.

7. Prijave

SUNLU PETG filament is suitable for a variety of applications due to its strength, durability, and ease of printing:

• Architectural Models: For detailed and sturdy building prototypes.
• igračke: Durable and safe for creating various toy designs.
• nakit: For intricate and resilient wearable art pieces.
• Alati: Functional parts that require mechanical strength and resistance.
• ukrasi: For aesthetic and long-lasting decorative items.

Slika: pramples of different applications for PETG filament, including architectural models, toys, jewelry, tools, and decorations.

8. Specifikacije

9. Jamstvo i podrška

SUNLU is committed to providing high-quality 3D printing materials and excellent customer service. For any inquiries, technical support, or warranty information, please refer to the official SUNLU website or contact their professional support team.

You can visit the official SUNLU Store for more products and support resources: SUNLU Store on Amazon