Uvod
Thank you for choosing the ErGear Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new height-adjustable desk. Please read this manual carefully before assembly and use to ensure safe and efficient operation.
Image: The ErGear Electric Standing Desk, 44x24 inches, in vintage brown, set up with a laptop, monitor, and other office items. It features a control panel for height adjustment.
Važne informacije o sigurnosti
- Do not exceed the recommended maximum weight limit of 176 pounds to ensure stability and longevity of the desk.
- Ensure all cables are properly managed and have sufficient slack to avoid damage or disconnection during height adjustments.
- Držite djecu i kućne ljubimce dalje od stola tokom rada kako biste spriječili povrede.
- Izbjegavajte stavljanje tekućina direktno na kontrolnu ploču ili u blizinu električnih komponenti.
- Koristite samo priloženi adapter za napajanje i komponente.
- Redovno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti.
Sadržaj paketa
Before beginning assembly, please verify that all components are present and undamaged. Refer to the assembly video for a visual guide to the parts.
- Desktop (Two-piece)
- Noge za stol (2)
- Bočne ploče (2)
- Prenosni štap
- Control Panel
- Adapter za napajanje
- Obujmice za upravljanje kablovima
- Kuke za slušalice (2)
- All necessary screws and tools (Allen wrench, etc.)
Slika: Eksplodirala view of the ErGear Electric Standing Desk components, including the two-piece desktop, leg frames, control panel, and various hardware, laid out on a white background.
Postavljanje i montaža
Follow these steps to assemble your ErGear Electric Standing Desk. An average assembly time is approximately 30 minutes.
Step 1: Assemble the Desk Legs
- Attach the foot pads to the bottom of each leg.
- Connect the leg frames using the provided crossbar and screws. Ensure all screws are tightened securely.
Slika: Krupni plan view of the desk leg assembly, showing screws being inserted to secure the leg components.
Step 2: Attach Side Plates and Transmission Rod
- Secure the side plates to the top of the assembled leg frames using the designated screws.
- Insert the transmission rod into the appropriate slots on the leg frames and motor assembly. Ensure it is fully engaged. If the desk legs are not the same height, insert the rod into the left leg and turn to adjust until they are level.
Image: The desk frame with the transmission rod correctly installed, connecting the two leg mechanisms.
Step 3: Assemble the Desktop and Other Parts
- Place the two-piece desktop upside down on a soft, clean surface.
- Align the desktop pieces and secure them together using the provided connectors and screws.
- Carefully place the assembled leg frame onto the desktop, aligning the screw holes.
- Attach the leg frame to the desktop using the provided screws.
- Install the control panel and headphone hooks to the underside of the desktop as indicated in the instructions.
Image: The underside of the desk, showing the control panel and cable management clips attached to the desktop.
Korak 4: Povežite kablove
- Connect the motor cable to the control box.
- Spojite kabel upravljačke ploče na upravljačku kutiju.
- Connect the power adapter to the control box and then to a power outlet.
- Use the provided cable management clips to organize all cables neatly.
Za vizualni vodič korak po korak, pogledajte službeni video za montažu:
Video: Official ErGear Electric Standing Desk Assembly Video. This video demonstrates the complete assembly process for the EGESD4/5/6 models, including attaching legs, side plates, transmission rod, desktop, and connecting cables.
Uputstvo za upotrebu
Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment and memory presets.
Podešavanje visine
- Podignite radnu površinu: Pritisnite i držite Strelica prema gore (▲) dugme da biste podigli sto na željenu visinu.
- Donji pult: Pritisnite i držite Strelica prema dolje (▼) dugme da biste spustili sto na željenu visinu.
- The desk height can be adjusted smoothly from 28.35 inches to 46.46 inches.
Image: A close-up of the ErGear desk control panel, showing the digital height display and the up/down arrow buttons for manual adjustment.
Memory Presets
The control panel allows you to save up to three preferred height settings for quick transitions.
- Da biste sačuvali predefinisanu postavku: Adjust the desk to your desired height using the up/down arrows. Press the "S" dugme, a zatim odmah pritisnite jedno od numeričkih dugmadi ("1", "2", ili "3") da biste sačuvali trenutnu visinu u toj unaprijed postavljenoj postavci.
- To Use a Preset: Jednostavno pritisnite odgovarajuće dugme s brojem ("1", "2", ili "3"). Stol će se automatski pomjeriti na sačuvanu visinu.
Observe the smooth operation of the desk's height adjustment:
Video: A user demonstrating the height adjustment feature of the ErGear Standing Desk. The desk smoothly moves up and down, showcasing the electric motor's functionality and the ease of using the control panel.
Održavanje
- čišćenje: Obrišite površinu radne površine mekom,amp krpom. Izbjegavajte jake hemikalije ili abrazivna sredstva za čišćenje koja bi mogla oštetiti završnu obradu.
- inspekcija: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
- Upravljanje kablovima: Ensure cables remain organized and free from entanglement to prevent damage during height adjustments.
- Njega motora: The motor is designed for long-term operation. Avoid overloading the desk beyond its maximum weight capacity.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Radni sto se ne pomjera. | Power cable disconnected; motor cable disconnected; overload. | Check all cable connections. Ensure desk is plugged into a working outlet. Reduce weight on the desk. |
| Radni sto se neravnomjerno pomiče. | Transmission rod not properly engaged; uneven weight distribution. | Verify the transmission rod is fully inserted and adjusted. Distribute weight evenly on the desktop. |
| Desk makes unusual noises. | Loose screws; obstruction. | Check and tighten all assembly screws. Ensure no objects are obstructing the lifting mechanism. |
| Predefinisane postavke memorije ne rade. | Unaprijed postavljene postavke nisu ispravno sačuvane. | Re-save your desired height settings by pressing "S" then the number button. |
Specifikacije
- Brand: ErGear
- Broj modela: EGESD71V-US
- Dizajn stola: Električni stojeći sto
- Materijal radne površine: Inženjersko drvo (laminirano)
- Osnovni materijal: legirani čelik
- Boja: Vintage Brown
- Veličina: 44 x 24 inča
- Minimalna visina: 28.35 inča
- Maksimalna visina: 46.46 inča
- Debljina stola: 0.75 inča
- Preporuka za maksimalnu težinu: 176 funti
- Potrebna montaža: Da (Preporučuje se 1 osoba)
- UL na listi: Da
Informacije o garanciji
ErGear products come with a limited warranty. For specific details regarding your product's warranty coverage, please refer to the documentation included with your purchase or visit the official ErGear website.
- Desktop and Desk Frame: Dvogodišnja zaštita
- Motors and Electrical Components: Dvogodišnja zaštita
Korisnička podrška
If you encounter any issues or have questions regarding your ErGear Electric Standing Desk, please contact our customer support team for assistance.
- Online podrška: Visit the official ErGear webstranica za često postavljana pitanja i resurse podrške.
- Email: Refer to your product packaging or the ErGear webstranica za adrese e-pošte korisničke službe.
- Telefon: Refer to your product packaging or the ErGear webstranica za brojeve telefona korisničke službe.