Hover-1 Moj prvi hoverboard Combo Uputstvo za upotrebu

1. Sigurnosne informacije

Your safety is paramount when operating the Hover-1 My First Hoverboard Combo. Please read and understand all instructions before use. Failure to follow these instructions can result in serious injury or property damage.

• Always Wear Safety Gear: Helmets, knee pads, and elbow pads are highly recommended and should be worn at all times during operation.
• Ograničenja u dobi i težini: This product is designed for children. Ensure the user meets the appropriate age and weight guidelines for safe operation.
• Nadzor: Mlade vozače uvijek treba nadzirati odrasla osoba.
• Sigurna vožnja: Operate the hoverboard combo in safe, open areas away from traffic, pedestrians, and obstacles. Avoid riding on wet, uneven, or slippery surfaces.
• Sigurnost baterije: The device features a 24V/2.0 Ah Lithium-ion rechargeable battery with a safety shield enclosure to prevent fire and overheating. Use only the provided charger. Do not attempt to modify or tampsa baterijom.
• UL2272 certificirano: The Hover-1 My First Hoverboard Combo is UL2272 certified, ensuring it meets applicable safety standards for electrical and fire safety.
• Izbjegavajte vratolomije: Do not attempt jumps, tricks, or aggressive maneuvers that could lead to loss of control or injury.

2. Proizvod je gotovview

The Hover-1 My First Hoverboard Combo transforms a standard hoverboard into an exciting buggy experience. This product is designed to provide a fun and intuitive riding experience for children, combining the self-balancing technology of a hoverboard with the stability and control of a kart.

Ključne karakteristike:

• Dvostruki motori od 150 W: Provides a total of 300W power for smooth acceleration and handling.
• Gume od 6.3 inča: Designed for a smooth and stable ride.
• maksimalna brzina: Do 8 km/h (5 mph).
• Maks. Domet: Approximately 3 miles (4.8 km) on a full charge.
• LED farovi: Enhances visibility and adds to the riding experience.
• Hover Buggy Attachment: Converts the hoverboard into a seated kart with hand-operated rear-wheel control and an adjustable frame.

Figure 2.1: The Hover-1 My First Hoverboard Combo, showcasing the hoverboard with the attached buggy frame and seat.

3. Postavljanje i montaža

3.1 Uključene komponente:

Prije montaže, provjerite da li su sve komponente prisutne:

• Hover-1 My First Hoverboard Combo (Hoverboard and Buggy Attachment)
• Manual
• Zidni punjač

3.2 Početno punjenje:

Before first use, fully charge the hoverboard. The 24V/2.0 Ah Lithium-ion battery typically requires 5 hours for a full charge. Use only the provided wall charger.

1. Locate the charging port on the hoverboard.
2. Connect the charger to the hoverboard's charging port.
3. Uključite punjač u standardnu ​​zidnu utičnicu.
4. Indikatorska lampica na punjaču će se promijeniti (npr. iz crvene u zelenu) kada je punjenje završeno.
5. Isključite punjač kada se potpuno napuni. Nemojte prepunjavati.

3.3 Attaching the Buggy:

The buggy attachment features a quick-attach connection and an adjustable frame.

1. Ensure the hoverboard is powered off.
2. Position the buggy attachment over the hoverboard.
3. Align the quick-attach connectors on the buggy with the footpads of the hoverboard.
4. Securely fasten the attachment mechanisms. Refer to the diagrams in the printed manual for precise connection points.
5. Adjust the frame length to comfortably fit the rider's leg length. Ensure all locking mechanisms are engaged before riding.

4. Uputstvo za upotrebu

4.1 Riding the Hoverboard (without Buggy):

The Hover-1 features a self-balancing system for intuitive control.

1. Power on the hoverboard.
2. Step onto one side of the hoverboard first. The board will stabilize.
3. Place your other foot onto the hoverboard. Maintain a relaxed posture and keep your balance.
4. Nagnite se lagano naprijed da biste se kretali naprijed, a nagnite se unazad da biste usporili ili se vratili unazad.
5. To turn, apply gentle pressure with your feet in the desired direction.
6. To dismount, step off one foot at a time, ensuring the hoverboard remains stable.

4.2 Operating the Hover Buggy Attachment:

The buggy attachment provides a seated riding experience with hand controls.

1. Ensure the buggy is securely attached to the hoverboard and the hoverboard is powered on.
2. Sit comfortably in the seat with your feet on the footrests.
3. Grasp the hand-operated rear-wheel control levers.
4. Push both levers forward to move forward.
5. Pull both levers back to slow down or reverse.
6. To turn, push one lever forward while pulling the other back, or apply differential pressure.
7. Always maintain control and be aware of your surroundings.

Figure 4.1: A child demonstrating the operation of the Hover-1 My First Hoverboard Combo with the buggy attachment.

5. Održavanje

Regular maintenance ensures the longevity and safe operation of your Hover-1 My First Hoverboard Combo.

5.1 Čišćenje:

• Wipe down the hoverboard and buggy with a damp krpom nakon svake upotrebe.
• Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.
• Avoid getting water into electronic components or charging ports.

5.2 Skladištenje:

• Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• If storing for an extended period, ensure the battery is charged to approximately 50% and recharge it every 3 months to prevent battery degradation.

5.3 Briga o bateriji:

• Koristite samo originalni punjač koji dolazi s proizvodom.
• Do not operate the hoverboard if the battery is visibly damaged or leaking.
• Baterije odložite u skladu sa lokalnim propisima.

6. Otkrivanje problema

If you encounter issues with your Hover-1 My First Hoverboard Combo, refer to the following common problems and solutions:

If you experience a problem not listed here, or if the suggested solutions do not resolve the issue, please contact Hover-1 Customer Support for assistance.

7. Specifikacije

8. Jamstvo i podrška

8.1 Informacije o garanciji:

The Hover-1 My First Hoverboard Combo comes with a 90-dnevna garancija from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.

8.2 Podrška korisnicima:

For warranty claims, technical assistance, or any questions regarding your Hover-1 My First Hoverboard Combo, please contact Hover-1 Customer Support. Refer to the contact information provided on the Hover-1 official website or the packaging for the most current support details.

When contacting support, please have your model number (H1-MFH-CMB-3) and proof of purchase readily available.