User Manual: Tuya Smart ZigBee Energy Meter 80A

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Srutueo Tuya Smart ZigBee Energy Meter 80A. This device is designed to monitor electrical parameters such as KWh, voltage, current, and power consumption for both 110V and 240V systems. It integrates with the Tuya Smart or Smart Life application for remote monitoring and control.

2. Proizvod je gotovview

The Srutueo Smart ZigBee Energy Meter consists of the main meter unit and an external Current Transformer (CT) clamp. The meter unit processes the data, while the CT clamp measures the current flowing through the monitored circuit.

Slika 2.1: Srutueo Tuya Smart ZigBee Energy Meter and Current Transformer (CT) Clamp. The meter unit has input terminals for L, N, S1, and S2, indicating connections for live, neutral, and the CT clamp.

Slika 2.2: Close-up view of the Current Transformer (CT) Clamp. This component is designed to be clamped around a live wire to measure current non-invasively.

3. Specifikacije

4. Postavljanje i instalacija

4.1 Sigurnosne mjere

• Ensure power is disconnected from the circuit before installation to prevent electric shock.
• Instalaciju treba izvršiti kvalificirani električar ako niste upoznati s električnim ožičenjem.
• Ne prekoračujte maksimalnu nazivnu struju od 80A.

4.2 Dijagram ožičenja

Follow the diagram below for correct wiring. The meter requires a live (L) and neutral (N) connection for power. The CT clamp wires (S1, S2) connect to the corresponding terminals on the meter. The CT clamp should be installed around the live wire of the load you wish to monitor.

Slika 4.1: Wiring diagram showing connections for the energy meter. The L and N terminals connect to the main power supply, and the S1/S2 terminals connect to the CT clamp, which encircles the live wire of the load.

1. Connect the Live (L) wire from your power source to the 'L' terminal on the meter.
2. Connect the Neutral (N) wire from your power source to the 'N' terminal on the meter.
3. Connect the red wire of the CT clamp to the 'S1' terminal on the meter.
4. Connect the black wire of the CT clamp to the 'S2' terminal on the meter.
5. Otvorite CT clamp and place it around the live wire of the electrical load you intend to monitor. Ensure the clamp je sigurno zatvoren.

4.3 Instalacija i uparivanje aplikacije

This device requires a ZigBee gateway (not included) and the Tuya Smart or Smart Life app for full functionality.

1. Download the "Tuya Smart" or "Smart Life" app from your mobile device's app store (Google Play Store for Android, Apple App Store for iOS).
2. Registrirajte se ili se prijavite na svoj račun.
3. Provjerite je li vaš ZigBee gateway uključen i povezan s vašom kućnom Wi-Fi mrežom.
4. In the app, tap '+' to add a new device. Select "Add Device" and then choose the appropriate ZigBee device category (e.g., "Energy Meter" or "Sensor").
5. Follow the on-screen instructions to put the energy meter into pairing mode (refer to the device's specific pairing button/procedure if available, typically a long press of a reset button).
6. Once the device is discovered and added, you can rename it and assign it to a room.

5. Uputstvo za upotrebu

5.1 Monitoring Energy Consumption

Nakon uspješnog uparivanja, možete view real-time and historical energy data through the Tuya Smart or Smart Life app.

Slika 5.1: App interface displaying energy consumption overview, including daily average costs and usage over time.

Slika 5.2: App interface showing real-time readings for voltage, current, and power consumption of the monitored circuit.

• Otvorite aplikaciju Tuya Smart ili Smart Life.
• Select your energy meter device from the device list.
• The main screen will display real-time voltagočitanja e, struje i snage.
• Navigate through tabs or sections to view historical data, daily/weekly/monthly consumption, and energy cost estimates.

5.2 Creating Smart Scenes (Automation)

The app allows you to create automated scenes based on the energy meter's readings, integrating with other smart devices.

Slika 5.3: App interface for creating smart scenes. This allows setting conditions (e.g., power exceeding a threshold) to trigger actions (e.g., turning off a smart breaker).

• In the app, go to the "Smart" or "Automation" section.
• Tap to create a new "Scene" or "Automation".
• Set a condition (e.g., "When power exceeds 2000W").
• Set an action (e.g., "Turn off Smart Breaker").
• Save the scene. This allows for automatic control of appliances based on energy consumption.

6. Održavanje

The Srutueo Smart ZigBee Energy Meter is designed for low maintenance. Follow these guidelines to ensure optimal performance:

• čišćenje: Obrišite uređaj mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Okruženje: Ensure the device is installed in a dry environment, away from direct sunlight, excessive heat, or moisture. The ambient temperature range is -10°C to 50°C.
• Ažuriranja firmvera: Periodically check the Tuya Smart/Smart Life app for any available firmware updates for the device to ensure it has the latest features and security patches.

7. Otkrivanje problema

8. Garancija i podrška

For warranty information or technical support, please contact the manufacturer, Srutueo, or your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: Srutueo

For further assistance, please visit the official Srutueo webstranice ili kontaktirajte njihovu korisničku službu.