Uvod
This manual provides instructions for the safe installation, operation, and maintenance of your Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight, Model MRL-S20803SBW. This fixture is designed for residential and commercial indoor applications, offering adjustable color temperature and dimming capabilities. Please read these instructions thoroughly before installation and retain them for future reference.
Sigurnosne informacije
WARNING: RISK OF ELECTRIC SHOCK. DISCONNECT POWER AT THE CIRCUIT BREAKER BEFORE INSTALLATION OR SERVICING.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for installation in ceilings only.
- Ne modificirajte uređaj niti ga koristite u druge svrhe osim za one za koje je namijenjen.
- Osigurajte dovod voltage je 120VAC.
- This product is IC Rated, suitable for direct contact with insulation.
- Ovo postrojenje je Damp Rated, suitable for use in bathrooms and kitchens where moisture may be present.
Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- 1 x Maxxima 2-inch Square LED Downlight Fixture (White Trim, Black Baffle)
- 1 x Remote Junction Box with Integrated CCT Selectable Switch
- 1 x Foam Gasket (pre-attached or included)
This image displays the complete Maxxima 2-inch square LED downlight unit, including the main fixture with its white trim and deep-set black baffle, and the connected external junction box.
Postavljanje i instalacija
Slijedite ove korake za pravilnu instalaciju:
Potreban alat:
- Skidači žice
- Odvijač (Phillips i Flathead)
- Hole Saw or Template (2.5-inch diameter)
- Measuring Tape
Koraci instalacije:
- Isključite napajanje: Locate the circuit breaker controlling the area where the downlight will be installed and turn off the power. Verify power is off using a voltage tester.
- Priprema otvora na plafonu: Using a 2.5-inch hole saw or template, cut a circular opening in the ceiling at the desired location. Ensure there are no obstructions (e.g., joists, pipes) behind the cutting area.
- Access Junction Box: Open the cover of the remote junction box.
- Žične veze: Connect the household electrical wires to the junction box wires. Use appropriate wire connectors (not included) to secure the connections:
- Connect the black (Live) wire from the supply to the black wire of the junction box.
- Connect the white (Neutral) wire from the supply to the white wire of the junction box.
- Connect the green or bare copper (Ground) wire from the supply to the green wire of the junction box.
This image displays the interior of the junction box with its cover open, revealing the wiring terminals for electrical connections (black, white, green) and the prominent 5 CCT selector switch.
- Odaberite temperaturu boje (CCT): Prije zatvaranja razvodne kutije, koristite prekidač koji se nalazi sa strane razvodne kutije da biste odabrali željenu temperaturu boje (2700K, 3000K, 3500K, 4000K ili 5000K).
Uveličano view of the 5 CCT switch on the side of the junction box, clearly showing the selectable color temperature options: 2700K, 3000K, 3500K, 4000K, and 5000K.
This image illustrates the key feature of 5 CCT (Correlated Color Temperature) selection. It shows the downlight fixture alongside a magnified view of the switch located on the junction box, indicating options for 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), and 5000K (Daylight).
- Sigurna razvodna kutija: Close the junction box cover and secure it. Place the junction box into the ceiling cavity, ensuring it is not pinched or stressed.
- Spojite uređaj na razvodnu kutiju: Connect the male connector from the downlight fixture to the female connector on the junction box's installation cord. Ensure a secure connection.
- Insert Downlight Fixture: Gently push the spring-loaded clips on the sides of the downlight fixture upwards and insert the fixture into the ceiling opening. Release the clips to secure the fixture flush against the ceiling. The foam gasket will help create a tight seal.
Pozadi view of the Maxxima 2-inch square LED downlight, revealing the heat sink fins for thermal management and the spring-loaded clips used for securing the fixture in the ceiling.
- Vrati snagu: Nakon što je uređaj sigurno instaliran, vratite napajanje na prekidaču.
A lifestyle image demonstrating several Maxxima 2-inch square LED downlights seamlessly integrated into the ceiling of a contemporary kitchen and living space, providing ambient lighting.
Uputstvo za upotrebu
Your Maxxima LED Downlight is designed for simple operation:
- Uključivanje/isključivanje: The downlight is controlled by a standard wall switch connected to the electrical circuit.
- Dimming: This fixture is compatible with most standard LED dimmers, allowing for a dimmable range of 20% to 100%. Ensure your dimmer is compatible with LED lighting for optimal performance.
- Odabir temperature boje: The color temperature (CCT) is set using the switch on the junction box during installation. It cannot be changed without accessing the junction box.
A detailed close-up of the Maxxima 2-inch square LED downlight after installation, showing the white trim flush with the ceiling and the black baffle housing the illuminated LED.
Održavanje
The Maxxima LED Downlight requires minimal maintenance:
- čišćenje: Da biste očistili uređaj, provjerite je li napajanje isključeno. Obrišite površinu mekom, suhom ili blago natopljenom krpom.amp krpom. Ne koristite abrazivna sredstva za čišćenje, rastvarače ili jake hemikalije, jer mogu oštetiti završnu obradu ili električne komponente.
- Nema dijelova koje može servisirati korisnik: LED izvor svjetlosti je integriran i nije zamjenjiv. Ne pokušavajte otvarati ili popravljati uređaj.
Rješavanje problema
If you encounter issues with your downlight, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. | Nema napajanja. Slabo ožičenje. Incorrect CCT switch setting. | Provjerite osigurač i zidni prekidač. Provjerite jesu li svi spojevi žica u razvodnoj kutiji sigurni (prvo se uvjerite da je napajanje isključeno). Confirm CCT switch on junction box is set to a valid position. |
| Svjetlo treperi ili se prigušuje neravnomjerno. | Nekompatibilni prekidač za prigušivanje svjetla. Slabo ožičenje. | Provjerite da li koristite prekidač za prigušivanje kompatibilan s LED diodama. Provjerite sve spojeve ožičenja (dok je napajanje isključeno). |
| Netačna temperatura boje. | CCT prekidač je nepravilno podešen. | Access the junction box (power off) and adjust the CCT selection switch to the desired setting. |
Specifikacije
| Feature | Specifikacija |
|---|---|
| Brand | Maxxima |
| Broj modela | MRL-S20803SBW |
| Potrošnja energije | 9 Watts |
| Osvetljenost | 500 lumena |
| Ulazni voltage | 120VAC |
| Temperatura boje (CCT) | 2700K / 3000K / 3500K / 4000K / 5000K Selectable |
| Indeks prikazivanja boja (CRI) | 90 |
| Dimming Range | 20% - 100% (with compatible LED dimmer) |
| Dimenzije uređaja (D x Š x V) | 3.16" x 3.16" x 2.6" |
| Junction Box Dimensions (H x W x D) | 1.25" x 3.4" x 3.4" |
| Recommended Hole Cutout | 2.5 inča |
| Materijal | Aluminijum |
| Završi | White Trim, Black Baffle |
| Certifikati | ETL Listed, IC Rated |
| Ocjena okoliša | Damp Rated (Indoor Use) |
| Beam Spread | 36° |
| Težina artikla | 10.72 unce |
A technical diagram illustrating the physical dimensions of the Maxxima 2-inch square LED downlight, with measurements of 3.16 inches in length, 3.16 inches in width, and 2.6 inches in height.
Garancija i podrška
This Maxxima LED Downlight is backed by a 3 godine garancije od datuma kupovine, pokrivajući nedostatke u materijalu i izradi pri normalnoj upotrebi.
For technical assistance, warranty claims, or product inquiries, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima webstranicu za ažurne kontakt informacije.
