ABSINA Mobile Wallbox 11 kW 16A with App Control

1. Uvod

The ABSINA Mobile Wallbox 11 kW 16A is a versatile and portable charging solution for electric vehicles. Designed for both home and travel use, it offers convenient and safe charging with integrated app control and RFID activation. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.

Figure 1: ABSINA Mobile Wallbox 11 kW 16A. This image shows the compact design of the wallbox with its CEE plug and Type 2 charging connector.

2. Sigurnosna uputstva

Molimo vas da pažljivo pročitate sva sigurnosna uputstva prije upotrebe uređaja. Nepoštivanje ovih uputstava može dovesti do strujnog udara, požara ili ozbiljnih povreda.

• Ensure the power supply meets the specified requirements (3 phases 415 V 50/60 Hz).
• Nemojte koristiti uređaj ako su kabl ili utikač oštećeni.
• Ne pokušavajte sami otvarati ili popravljati uređaj. Za servis se obratite kvalifikovanom osoblju.
• Keep the device away from water and extreme temperatures. The device is IP65 rated, but avoid submersion.
• Always ensure proper grounding.
• The integrated Type A+DC6 mA residual current circuit breaker provides enhanced safety. Do not bypass or modify it.
• Before installation, contact your local grid operator to register the wallbox as required.

Figure 2: Maximum Safety Features. The image highlights the Type A 30mA AC residual current protection and Type B 6mA DC fault current protection for enhanced user safety.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• ABSINA Mobile Wallbox 11 kW 16 A (three-phase)
• 3 x RFID Chips
• 3 x RFID kartice
• Nosač za montiranje na zid
• Materijal za montažu (vijci, tiple)
• Korisnički priručnik (ovaj dokument)

4. Postavljanje i instalacija

The ABSINA Mobile Wallbox is designed for "Plug and Play" use, requiring no complex installation. However, for permanent mounting, a wall bracket is included.

4.1 Initial Setup (Plug and Play)

1. Povežite se na napajanje: Insert the CEE plug of the Wallbox into a compatible 3-phase 415 V 50/60 Hz CEE socket.
2. Uključeno: The Wallbox will power on automatically. If the indicator light blinks red, press the emergency stop button once to reset.
3. Spremno za upotrebu: The Wallbox is now ready for charging, which can be activated via RFID or the app.

Figure 3: Plug & Play Functionality. This image illustrates the simple connection of the CEE plug to a power outlet, emphasizing ease of use without complex electrical installation.

4.2 Montiranje na zid (opciono)

For a more permanent setup, use the provided wall mount bracket and hardware.

1. Odaberite lokaciju: Select a suitable wall location near a compatible CEE socket, ensuring adequate ventilation and protection from direct weather exposure (though the unit is IP65 rated).
2. Označite tačke bušenja: Use the wall mount bracket to mark the drilling points on the wall.
3. Izbušite rupe: Drill holes at the marked points and insert the provided anchors.
4. Sigurnosni nosač: Attach the wall mount bracket to the wall using the screws.
5. Mount Wallbox: Carefully slide the Wallbox onto the mounted bracket until it clicks securely into place.

Figure 4: Easy Operation. The image shows the Wallbox mounted on a wall, connected to a vehicle, demonstrating its simple "Connect. Charge." principle.

5. Uputstvo za upotrebu

5.1 Charging Your Electric Vehicle

1. Poveži vozilo: Plug the Type 2 charging cable from the Wallbox into your electric vehicle's charging port.
2. Activate Charging:
   • Using RFID: Hold one of the provided RFID chips or cards over the RFID reader area on the Wallbox. The Wallbox will activate, and charging will begin.
   • Korištenje aplikacije: Open the ABSINA app (or compatible smart home app like Tuya Smart) on your smartphone. Select the Wallbox and initiate charging from the app interface.
3. Punjenje monitora: The app provides real-time data including charging voltage (V), current (A), power (kW), charged energy (kWh), and charging time.
4. Zaustavi punjenje:
   • Using RFID: Hold the RFID chip/card over the reader again to stop charging.
   • Korištenje aplikacije: Stop charging directly from the app.
5. Disconnect Vehicle: Once charging is complete or stopped, unplug the Type 2 cable from your vehicle.

Figure 5: Misuse Protection. The image shows a hand activating the Wallbox with an RFID chip, illustrating the secure activation method.

5.2 Funkcije kontrole aplikacija

The dedicated app (or compatible smart home app) provides advanced control and monitoring capabilities:

• Podesite struju punjenja: Set the charging current from 8 A to 16 A in 1 A increments to manage charging speed.
• Set Charging Mode: Choose preferred charging modes.
• Planirano punjenje: Utilize the charging delay function to start charging at a later time.
• Praćenje podataka u realnom vremenu: View live charging statistics.
• Daljinski start/stop: Control charging sessions from your smartphone.

Napomena: While the app displays charging data, this data is typically not stored permanently on the device once the charging cable is disconnected. For historical charging data, refer to your vehicle's own app if available.

6. Održavanje

To ensure the longevity and optimal performance of your ABSINA Mobile Wallbox, follow these maintenance guidelines:

• čišćenje: Wipe the exterior of the Wallbox with a soft, damp krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače. Prije čišćenja provjerite je li uređaj isključen iz struje.
• Inspekcija kablova: Regularly inspect the charging cable and CEE plug for any signs of damage, fraying, or wear. If damage is found, discontinue use immediately and contact support.
• Održavanje konektora: Keep the Type 2 connector clean and free of debris. Ensure the protective cap is in place when not in use.
• Skladištenje: When not in use, especially during travel, store the Wallbox in a dry, cool place, protected from direct sunlight and extreme temperatures.

Figure 6: Mobile Wallbox for Travel. This image shows the Wallbox conveniently stored in a car trunk, highlighting its portability and ease of transport.

7. Otkrivanje problema

If you encounter issues with your ABSINA Mobile Wallbox, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact ABSINA customer support.

8. Specifikacije

9. Garancija i podrška

ABSINA products are designed for reliability and performance. For warranty information and technical support, please refer to the official ABSINA webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu.

The manufacturer, ABSINA GmbH, is based in Germany and is committed to providing competent support.

Kontakt informacije: Please visit the official ABSINA website for the most up-to-date contact details for customer support and warranty claims.