Morpilot MF-MP01 Automatski električni aparat za pjenjenje mlijeka - uputstvo za upotrebu

1. Uvod

Thank you for choosing the Morpilot MF-MP01 Automatic Electric Milk Frother. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and retain it for future reference.

2. Sigurnosna uputstva

• Prije korištenja uređaja pročitajte sva uputstva.
• Do not immerse the base unit in water or other liquids. Only the frothing jug can be rinsed.
• Osigurajte napajanje voltage odgovara naljepnici s karakteristikama na uređaju.
• Nemojte koristiti uređaj sa oštećenim kablom ili utikačem.
• Držite uređaj van domašaja djece.
• Always place the frother on a flat, stable, heat-resistant surface.
• Do not fill above the maximum fill line to prevent overflow.
• Use only whole milk (fat content > 3.0%) for optimal frothing results.
• Isključite utikač iz utičnice kada nije u upotrebi i prije čišćenja.

3. Proizvod je gotovview

The Morpilot MF-MP01 is a versatile 4-in-1 electric milk frother designed for various milk preparations.

Slika 3.1: Morpilot MF-MP01 Milk Frother with included whisk attachments and cleaning brush.

Komponente:

• Electric Milk Frother Unit (with non-stick coating)
• Power Base (okretna baza od 360°)
• 2 Frothing Whisks (one for thick foam, one for thin foam)
• 1 Heating Whisk (for heating milk without frothing)
• Četka za čišćenje
• Uputstvo za upotrebu

Slika 3.2: Internal components and features including scratch-resistant interior, maximum frothing level, minimum liquid level, insulating plastic, non-stick coating, and 360° swivel base.

4. Podešavanje

1. Raspakirajte: Pažljivo izvadite sve komponente iz pakovanja.
2. Čisti: Before first use, clean the frothing jug interior and whisks with warm soapy water using the provided cleaning brush. Wipe the exterior of the frother and the power base with a damp cloth. Do not immerse the frother unit or power base in water.
3. Assemble Whisk: Select the appropriate whisk for your desired function (frothing or heating) and securely install it onto the shaft at the bottom of the frothing jug. Ensure it clicks into place.

Slika 4.1: Step 1 shows how to install the whisk into the frother unit.

5. Uputstvo za upotrebu

The Morpilot MF-MP01 offers four distinct functions for milk preparation. For best results, use cold whole milk (fat content > 3.0%).

Opći koraci rada:

1. Mjesto u bazi: Position the frother unit securely onto the power base.
2. Dodajte mlijeko: Pour the desired amount of milk into the frothing jug. Observe the internal fill lines:
   • Maximum frothing capacity: 130 ml
   • Maximum heating capacity: 240 ml (8.12 oz)
3. Odaberite funkciju: Press the power button to cycle through the four modes. The indicator lights will illuminate to show the selected function.
4. Početak: The frother will automatically begin operation and stop when the cycle is complete (approximately 80-120 seconds).

Slika 5.1: The control button allows selection of four functions: warm airy milk foam, warm dense milk foam, hot milk, and cold milk foam.

Dostupne funkcije:

• Warm Airy Milk Foam: Idealno za kapućino.
• Warm Dense Milk Foam: Pogodno za latte.
• Hladna mliječna pjena: Perfect for iced coffees or cold beverages.
• Zagrijati mlijeko: For warming milk without frothing.

Slika 5.2: The frother quickly prepares creamy milk foam for various drinks.

6. Održavanje i čišćenje

Redovno čišćenje osigurava optimalne performanse i produžava vijek trajanja vašeg aparata za pjenjenje.

1. Isključite: Uvijek isključite uređaj iz utičnice prije čišćenja.
2. Cool Down: Ostavite pjenilicu da se potpuno ohladi nakon upotrebe.
3. Uklonite mućkalicu: Carefully remove the whisk from the frothing jug.
4. Čista unutrašnjost: Rinse the interior of the frothing jug with warm water immediately after use. Use the provided cleaning brush and a small amount of mild dish soap to remove any milk residue. The non-stick coating makes cleaning easier.
5. Čista mutilica: Wash the whisk under running water.
6. Čista spoljašnjost: Obrišite vanjski dio jedinice za pjenjenje i bazu za napajanje čistim sredstvom.amp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili ribanje.
7. suho: Prije ponovnog sastavljanja ili skladištenja provjerite da li su svi dijelovi potpuno suhi.

Slika 6.1: The attached brush facilitates easy cleaning of the frother's interior.

7. Otkrivanje problema

If you encounter issues with your Morpilot MF-MP01, please refer to the following common problems and solutions:

8. Specifikacije

9. Garancija i podrška

Morpilot products are manufactured with quality and care. For warranty information or technical support, please refer to the warranty card included with your purchase or contact Morpilot customer service through their official website or the retailer where the product was purchased. Please have your model number (MF-MP01) and purchase date ready when contacting support.