Maxxima MRL-61505B

Maxxima 6-inčna ugradna LED svjetiljka s antirefleksnim premazom - uputstvo za upotrebu

Model: MRL-61505B

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight. Please read these instructions thoroughly before beginning installation and retain them for future reference. This product is designed for use in existing 5 or 6-inch recessed can housings.

Sigurnosne informacije

UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje na osiguraču ili prekidaču prije instalacije ili servisiranja.

Sadržaj paketa

Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight with E26 adapter and torsion springs

Image: The Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight, showing the main unit, E-26 quick connect adapter, and the attached torsion springs.

Karakteristike

Maxxima 6-inch Retrofit Recessed Anti-Glare LED Downlight installed in a ceiling, showing the anti-glare effect.

Image: An installed Maxxima downlight demonstrating its anti-glare design in a room setting.

Postavljanje i instalacija

Follow these steps to properly install your Maxxima LED Downlight. Ensure power is OFF before starting.

  1. Isključite napajanje: Locate the circuit breaker or fuse box controlling the light fixture you are replacing and turn off the power.
  2. Prepare Existing Can: Remove the existing bulb and trim from your 5 or 6-inch recessed can housing.
  3. Odaberite temperaturu boje (CCT): On the back of the LED downlight, locate the CCT selection switch. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. This setting can be changed later if needed.
  4. Close-up of the CCT selection switch on the back of the Maxxima LED downlight.

    Image: The CCT selection switch on the back of the downlight, allowing choice between 2700K, 3000K, 3500K, 4000K, and 5000K.

  5. Connect E-26 Adapter: Connect the E-26 Quick Connect Adapter to the socket in your existing recessed can.
  6. Maxxima LED downlight with the E26 quick connect adapter attached.

    Image: The E-26 Quick Connect Adapter connected to the downlight's wiring.

  7. Spojite downlight: Plug the quick connect cable from the LED downlight into the E-26 adapter.
  8. Insert into Can: Carefully push the LED downlight into the recessed can. The torsion springs on the sides of the downlight will compress and hold the fixture securely in place against the ceiling. Ensure the springs engage with the torsion clips inside the can housing. If the light does not sit flush, ensure the existing socket is pushed up as far as possible or disconnected if it obstructs the fixture.
  9. Vrati snagu: Once the downlight is securely installed, restore power at the circuit breaker or fuse box.

Video: Official Maxxima installation guide for the 6-inch Anti-Glare Retrofit LED Downlight, demonstrating the CCT selection and installation process.

Uputstvo za upotrebu

Održavanje

Rješavanje problema

ProblemMogući uzrokRješenje
Svjetlo se ne pali.No power, loose connection, faulty fixture.Check circuit breaker. Ensure all connections are secure. If problem persists, contact support.
Svjetlo nepravilno treperi ili se prigušuje.Nekompatibilan prigušivač, labavo ožičenje.Provjerite da li koristite prigušivač kompatibilan s LED diodama. Provjerite ožičenje.
Fixture does not sit flush with the ceiling.Torsion springs not properly engaged, obstruction in can, existing socket too low.Ensure torsion springs are fully engaged with the can's clips. Check for any obstructions inside the can. Adjust the height of the existing socket or remove it if it interferes with the fixture's depth. Bend the torsion springs from near the tops to maintain tension if they have lost shape.

Specifikacije

SpecifikacijaDetalj
Broj modelaMRL-61505B
Veličina6 inča
Wattage15W
Lumen Output1200 lumena
Temperatura boje (CCT)2700K / 3000K / 3500K / 4000K / 5000K Selectable
Dimmable10% - 100%
CRI90
Voltage120 VAC
Beam Spread36°
Dimenzije7.1" D x 7.1" Š x 4.5" V
MaterijalAluminijum
Lifetime Hours50,000 sati
CertifikatiETL Listed, T20 California Compliant
Unutrašnja/vanjska upotrebaUnutra (Damp Ocijenjeno)

Garancija

This Maxxima LED Downlight comes with a 3 godine garancije from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.

Podrška

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Maxxima customer service. Refer to the product packaging or the Maxxima webstranicu za ažurne kontakt informacije.