Uvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your CONENTOOL 12V Cordless Drill Driver Kit. Please read this manual thoroughly before first use and keep it for future reference.
The CONENTOOL 12V Cordless Drill Driver is designed for drilling into wood, plastic, metal, and other materials, as well as for driving and removing screws. It features a powerful 35 N.m max torque, 25+1 torque settings, and two variable speeds for versatile applications.
Image: The CONENTOOL 12V Cordless Drill Driver Kit, including the drill, two batteries, charger, and a case filled with various drill bits and screwdriver bits.
Važna sigurnosna uputstva
Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza prilikom korištenja električnih alata kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda.
- Wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and hearing protection.
- Održavajte svoj radni prostor čistim i dobro osvijetljenim. Zatrpana ili mračna područja izazivaju nesreće.
- Nemojte koristiti električne alate u eksplozivnoj atmosferi, kao što je prisustvo zapaljivih tečnosti, gasova ili prašine.
- Prije bilo kakvih podešavanja, promjene pribora ili skladištenja alata, provjerite je li alat isključen.
- Koristite odgovarajući alat za vašu primjenu. Nemojte forsirati alat.
- Neaktivni alat čuvajte van domašaja djece i drugih neobučenih osoba.
Komponente i karakteristike proizvoda
Familiarize yourself with the various parts and features of your CONENTOOL Cordless Drill Driver.
Image: A detailed diagram of the CONENTOOL drill driver highlighting its key components: 3/8" keyless chuck, 25+1 adjustable clutch, LED light, variable speed switch, forward and reverse button, 2 variable speeds, and 2000 mAh lithium battery.
- Brzostezna glava 3/8": For quick and easy bit changes. Features an all-metal automatic spindle lock.
- 25+1 Adjustable Clutch: Allows precise torque settings for various applications, preventing overtightening or stripping screws.
- LED svjetlo: Osvjetljava radno područje radi bolje vidljivosti u tamnim prostorima.
- Variable Speed Switch: Provides precise control over drilling and driving speed.
- Dugme za naprijed i nazad: Easily switch between drilling/driving and unscrewing.
- 2 promjenjivih brzina: Low speed (0-450 RPM) for screwing, high speed (0-1650 RPM) for drilling.
- 2000 mAh Lithium Battery: Offers long-lasting power and reliable performance.
Slika: Interni view of the drill, highlighting the improved motor made of pure copper, designed for more power, durability, and quieter operation with small power loss.
Image: A graph illustrating the extended working hours provided by the 2x 2.0AH large capacity batteries compared to other batteries, showing a slower discharge rate over time.
Setup
Punjenje baterije
- Priključite punjač na standardnu utičnicu.
- Umetnite baterijski paket na punjač dok ne klikne na svoje mjesto.
- Allow the battery to charge fully before first use. The indicator light on the charger will change when charging is complete.
- Always disconnect the charger from the power supply and remove the battery once fully charged.
Instaliranje/vađenje baterije
- To install: Align the battery pack with the base of the drill handle and slide it in until it locks securely.
- To remove: Press the battery release button (usually located on the side of the battery pack) and slide the battery out.
Ugradnja/uklanjanje svrdla ili odvijača
Image: A close-up showing the operation of the 3/8" (10mm) self-locking drill chuck, demonstrating how to open and close it to insert or remove bits.
- Provjerite da li je bušilica isključena i da li je prekidač za naprijed/nazad u srednjem (zaključanom) položaju.
- Okrenite steznu glavu suprotno od smjera kazaljke na satu da biste otvorili čeljusti.
- Insert the desired drill bit or screwdriver bit fully into the chuck.
- Okrenite steznu glavu u smjeru kazaljke na satu kako biste sigurno zategnuli čeljusti oko svrdla. Provjerite je li svrdlo centrirano i čvrsto držano.
- Za uklanjanje: Okrenite steznu glavu suprotno od smjera kazaljke na satu da biste olabavili čeljusti i izvukli svrdlo.
Uputstvo za upotrebu
Odabir brzine
Image: A visual representation of the two-speed levels: 0-450 RPM for drilling holes in various materials (Speed 1) and 0-1650 RPM for tightening or loosening screws (Speed 2).
- Speed 1 (Low, 0-450 RPM): Ideal for driving screws, larger diameter drilling, or applications requiring higher torque.
- Speed 2 (High, 0-1650 RPM): Suitable for smaller diameter drilling and applications requiring faster speed.
- Adjust the speed by sliding the gear selector switch located on top of the drill.
Adjusting Torque (Clutch Setting)
Image: A chart illustrating the drill's multifunctional capabilities, showing increasing torque/power levels suitable for screws, wood, ceramics, brick, concrete, and steel, with distinct settings for drilling and screwdriving.
- The torque adjustment ring is located behind the chuck. Rotate it to select the desired torque setting from 1 to 25.
- The higher the number, the greater the torque. Start with a lower setting and increase as needed to prevent overtightening or damaging the workpiece.
- Use the drill symbol setting for drilling applications, which provides maximum torque without clutch engagement.
Rad naprijed/nazad
- Push the forward/reverse selector switch (located above the trigger) to the left for forward rotation (drilling/driving screws).
- Za obrnuto okretanje (uklanjanje vijaka) pritisnite prekidač udesno.
- For safety, place the switch in the center position to lock the trigger and prevent accidental starting.
Upravljanje bušilicom
- Ensure the correct bit is installed and the battery is charged.
- Odaberite odgovarajuću postavku brzine i obrtnog momenta za vaš zadatak.
- Postavite svrdlo na radni komad.
- Press the trigger to start the drill. The LED light will illuminate the work area.
- Primjenjujte stalan, ravnomjeran pritisak. Nemojte forsirati bušilicu.
- Otpustite okidač da zaustavite bušilicu.
Image: A user demonstrating the versatility of the CONENTOOL drill, shown both drilling into wood and driving a screw into a wall, illustrating its practical application.
Održavanje
General Cleaning
- Uvijek isključite baterijski paket prije čišćenja.
- Obrišite alat čistom krpomamp tkanina. Nemojte koristiti jake hemikalije ili abrazivna sredstva za čišćenje.
- Održavajte ventilacijske otvore čistim od prašine i ostataka kako biste spriječili pregrijavanje. Po potrebi koristite komprimirani zrak.
Battery Care
- Čuvajte baterije na hladnom i suvom mestu dalje od direktne sunčeve svetlosti i ekstremnih temperatura.
- Ne skladištite baterije u ispražnjenom stanju duži period. Povremeno ih punite ako ih ne koristite.
- Nemojte kratko spajati polove baterije.
Accessory Care
- Clean drill bits and screwdriver bits after use.
- Store accessories in the provided carrying case to prevent damage and loss.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Bušilica se ne pokreće | Baterija nije napunjena ili nije pravilno instalirana. Prekidač za naprijed/nazad je u srednjem (zaključanom) položaju. | Charge battery fully. Reinstall battery securely. Move forward/reverse switch to desired direction. |
| Gubitak snage tokom rada | Baterija je slaba. Aktivirana je zaštita od preopterećenja. | Napunite bateriju. Smanjite pritisak ili koristite veći obrtni moment. |
| Bit wobbles or falls out | Chuck not tightened properly. Bit shank is damaged. | Retighten chuck firmly. Replace damaged bit. |
| Pregrijavanje | Neprekidna intenzivna upotreba. Blokirana ventilacija. | Allow tool to cool down. Clear ventilation openings. |
Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | CR-314 |
| Voltage | 12 Volts |
| Maksimalni obrtni moment | 35 Nm |
| Brzina bez opterećenja (niska) | 0-450 RPM |
| Brzina bez opterećenja (visoka) | 0-1650 RPM |
| Postavke kvačila | 25+1 |
| Veličina Chuck-a | 3/8" (10 mm) bez ključa |
| Vrsta baterije | Litijum-jonski |
| Kapacitet baterije | 2000 mAh (2x included) |
| Težina | 2.13 kg (sa baterijom) |
| Dimenzije (D x Š x V) | 31 x 25 x 9 cm |
Uključena dodatna oprema
Image: A display of all accessories included in the kit, such as the cordless drill, flexible drill shank, various drill bits, screwdriver bits, socket spanner, connection head, charger, rechargeable batteries, and carrying case.
- 1 x Akumulatorska bušilica
- 1 x Flexible Drill Shank
- 6 x Conventional Drill Bits
- 6 x dugačka nastavka odvijača
- 9 x Socket Spanners
- 10 x Bitovi za odvijač
- 2 x Connection Heads
- 1 x punjač
- 2 x Rechargeable Batteries (2000 mAh each)
- 1 x torbica za nošenje
Garancija i podrška
CONENTOOL is committed to providing high-quality products. For any questions regarding your product, please refer to the seller's contact information or Amazon's customer service.
While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims.
For further assistance or technical support, please contact the seller Zhen Hui Xiang EU through the Amazon platform.
