1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Xprinter XP-370B Thermal Barcode Sticker Printer. Please read this manual thoroughly before using the printer to ensure proper functionality and to prevent damage.
2. Sigurnosne informacije
- Uvijek priključujte štampač na uzemljenu utičnicu.
- Do not expose the printer to water or high humidity.
- Izbjegavajte postavljanje štampača na direktnu sunčevu svjetlost ili u blizinu izvora toplote.
- Use only Xprinter approved accessories and power adapters.
- Držite štampač podalje od djece.
- Ne pokušavajte sami rastavljati ili popravljati štampač. Za pomoć se obratite kvalifikovanom servisnom osoblju.
3. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- Xprinter XP-370B Thermal Barcode Sticker Printer
- Adapter za napajanje
- USB kabel
- Vodič za brzi početak (ako je uključen)
4. Proizvod je gotovview
The Xprinter XP-370B is a compact and efficient thermal printer designed for barcode and sticker printing. It features high-speed printing capabilities and supports various connectivity options.
Slika 4.1: Prednji desni view of the Xprinter XP-370B Thermal Barcode Sticker Printer.
Slika 4.2: Bočna strana view illustrating the power button and top cover key for accessing the media compartment.
5. Podešavanje
5.1 Raspakivanje i postavljanje
- Pažljivo izvadite štampač iz ambalaže.
- Place the printer on a stable, flat surface with adequate ventilation.
- Ensure there is enough space around the printer for cable connections and media loading.
5.2 Povezivanje štampača
- Connect the power adapter to the printer's power port and then plug it into a power outlet.
- Connect the printer to your computer using the provided USB cable. The printer also supports Serial, Ethernet, and Bluetooth connectivity options depending on the model.
- Turn on the printer using the power button located on the side (refer to Figure 4.2).
5.3 Loading Print Media
- Press the top cover key (refer to Figure 4.2) to open the printer's top cover.
- Place the roll of thermal labels into the media compartment. The maximum label diameter supported is 100mm.
- Adjust the paper guide to fit the width of your labels securely.
- Pull a small length of labels past the print head.
- Close the top cover until it clicks into place.
Figure 5.3: The printer demonstrating a label being fed out after printing.
5.4 Instalacija drajvera
- For Windows systems, insert the driver CD (if provided) or download the latest drivers from the official Xprinter webstranica. Slijedite upute na ekranu za instalaciju.
- For Android and iOS devices, download the appropriate printing application from your device's app store.
6. Uputstvo za upotrebu
6.1 Osnovno štampanje
- Provjerite je li štampač uključen i povezan s vašim uređajem.
- Open the document or application from which you wish to print.
- Select the Xprinter XP-370B from your list of available printers.
- Adjust print settings such as label size, orientation, and density as needed.
- Initiate the print command. The printer will begin printing at speeds up to 152mm/s.
7. Održavanje
7.1 Čišćenje štampača
- Isključite i iskopčajte štampač iz struje prije čišćenja.
- Koristite meku krpu koja ne ostavlja dlačice dampened with isopropyl alcohol to gently clean the print head.
- Clean the exterior of the printer with a soft, dry cloth.
- Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
8. Otkrivanje problema
- Štampač ne reaguje: Check power connection, USB/Serial/Ethernet/Bluetooth connection, and ensure drivers are correctly installed.
- Loš kvalitet štampe: Clean the print head, ensure correct media type is used, and check print density settings.
- Zaglavljen papir: Open the top cover, carefully remove any jammed labels, and re-load the media correctly.
- Labels not feeding: Ensure labels are loaded correctly and the paper guide is adjusted properly. Check for any obstructions.
9. Specifikacije
| Feature | Specifikacija |
|---|---|
| Brand | Xprinter |
| Broj modela | XP-370B |
| Tehnologija štampača | Thermal |
| Tehnologija povezivanja | USB, Serial, Bluetooth, Ethernet (options vary) |
| Maksimalna brzina štampe | Do 152 mm/s |
| Maksimalna veličina medija | 4 x 6 inča |
| Maximum Label Diameter | 100 mm |
| Print Media | Etikete |
| Izlaz štampača | Monochrome |
| Dimenzije artikla (D x Š x V) | 15D x 7W x 10H centimetara |
| Težina artikla | 300 g |
| Podržani operativni sistemi | Windows, Android, iOS |
10. Garancija i podrška
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xprinter webSačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.
