1. Uvod
The BSEED V098-120V Adjustable Voltage Surge Protector Outlet is designed to safeguard your electronic devices and home appliances from damage caused by voltagfluktuacije, gubitak snagetages, and electrical surges. Featuring an LED digital display and adjustable voltage settings, this compact device provides reliable protection and peace of mind.
2. Sigurnosne informacije
Molimo pročitajte i razumite sva sigurnosna uputstva prije upotrebe ovog proizvoda. Nepoštivanje ovih uputstava može dovesti do strujnog udara, požara ili ozbiljnih povreda.
- Nemojte rastavljati niti modificirati uređaj.
- Osigurajte da se uređaj koristi unutar njegove navedene količinetage (120V), current (15A), and power (1800W) limits.
- Izbjegavajte izlaganje uređaja vodi ili prekomjernoj vlazi.
- Do not use if the device or its connected appliance appears damaged.
- This product is made from premium flame-retardant ABS material, meeting UL94-V-1.0 grade test standards for enhanced safety.
3. Proizvod je gotovview
The BSEED V098-120V surge protector features a compact design with an integrated LED display and control buttons for easy operation.
Figure 3.1: Two BSEED V098-120V Surge Protector Outlets.
Slika 3.2: Detaljno view of the surge protector's LED display and control buttons. The display shows current voltage, and the side buttons are used for setting high voltage zaštita, mala voltage protection, and delay time.
Ključne karakteristike:
- Adjustable Voltage Zaštita: Set custom high and low voltage pragovi.
- Postavka vremena odgode: Configure a delay before power restoration after a voltage događaj.
- LED digitalni displej: Clearly shows current operating status and settings.
- Over/Under Voltage Zaštita: Automatically cuts off power to prevent appliance damage.
- Kompaktan dizajn: Wall tap adapter design saves space and does not block other outlets.
Figure 3.3: The compact size of the surge protector, measuring approximately 3.91 inches in height and 2.11 inches in width, designed to not obstruct adjacent outlets.
4. Podešavanje
- Raspakirajte: Pažljivo izvadite prenaponsku zaštitu iz ambalaže.
- Pregledajte: Provjerite uređaj na vidljiva oštećenja. Ne koristite ga ako je oštećen.
- Priključak: Insert the surge protector directly into a standard 120V wall outlet. The LED display will illuminate, showing the current voltage.
- Povežite uređaj: Plug your appliance into the surge protector's outlet. Ensure the appliance's power consumption does not exceed 1800W (15A at 120V).
5. Uputstvo za upotrebu
The BSEED V098-120V allows you to adjust its high voltage zaštita, mala voltage protection, and power-on delay settings.
Podešavanje parametara:
- With the device plugged in and powered on, press and hold the central 'SET' button on the side for approximately 2 seconds until the display changes to show an adjustable parameter (e.g., 'H' for high voltagi).
- Koristite '+' i '-' buttons (located above and below the 'SET' button) to increase or decrease the displayed value.
- Pritisnite 'SET' button briefly to cycle through the adjustable parameters:
- H (High Voltage zaštita): Set the maximum acceptable voltage. Ako je voltage exceeds this, power will be cut.
- L (Low Voltage zaštita): Set the minimum acceptable voltage. Ako je voltage drops below this, power will be cut.
- S (Delay Time): Set the delay in seconds before power is restored after a voltage event. This protects appliances like refrigerators from rapid power cycling.
- Once you have set all desired parameters, stop pressing buttons. The device will automatically save the settings and return to displaying the current voltage after a few seconds of inactivity.
Video 5.1: Demonstration on how to adjust the voltage protection parameters and delay time on the BSEED V098-120V surge protector.
6. Održavanje
The BSEED V098-120V surge protector requires minimal maintenance.
- Uređaj održavajte čistim i bez prašine. Za čišćenje koristite suhu, meku krpu.
- Ne koristite tekuća sredstva za čišćenje ili abrazivne materijale.
- Osigurajte odgovarajuću ventilaciju oko uređaja.
7. Otkrivanje problema
If you encounter issues with your BSEED V098-120V surge protector, refer to the table below for common problems and solutions.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uređaj se ne uključuje. | No power from wall outlet; device malfunction. | Check wall outlet with another device. If still no power, contact customer support. |
| Uređaj ne prima napajanje. | Voltage outside set limits; delay time active. | Check the LED display for current voltage. Wait for the delay time to complete. Adjust voltage limits if necessary. |
| Displej prikazuje kod greške. | Interna greška. | Unplug the device for 30 seconds and plug it back in. If the error persists, contact customer support. |
8. Specifikacije
- Model: V098-120V
- Brand: BSEED
- Voltage: 120 Volts
- Ukupno utičnice: 1
- trenutno: 15 Amps (maks.)
- Snaga: 1800 W (maks.)
- Posebna karakteristika: Surge Protection, Adjustable Voltage, LED Display
- Materijal: High-quality ABS (Flame Retardant UL94-V-1.0)
- Težina artikla: 10.5 unce
- Dimenzije paketa: 5.35 x 5.28 x 3.7 inča
9. Garancija i podrška
BSEED provides a welcome guide with your purchase and offers 24-hour customer service. If you have any requests or doubts, please feel free to contact us.
- Služba za korisnike: Available 24 hours.
- Kontakt: Refer to the contact information provided in your product packaging or on the official BSEED website.
