CREATE Warm Clear 2000W Electric Convector Heater with WiFi User Manual

1. Uvod i sigurnosne informacije

Thank you for choosing the CREATE Warm Clear 2000W Electric Convector Heater. This manual provides essential information for the safe and efficient operation of your new appliance. Please read these instructions carefully before use and retain them for future reference.

Važna sigurnosna uputstva:

• Pročitajte sva uputstva prije korištenja ovog grijača.
• Nemojte koristiti ovaj grijač u neposrednoj blizini kade, tuša ili bazena.
• Nemojte koristiti ovaj grijač ako je pao.
• Nemojte koristiti ako postoje vidljivi znakovi oštećenja grijača.
• Držite podalje djecu mlađu od 3 godina osim ako nisu pod stalnim nadzorom.
• Djeca starija od 3 godine i mlađa od 8 godina smiju uključivati/isključivati ​​uređaj samo pod uvjetom da je postavljen ili instaliran u predviđenom normalnom radnom položaju i da su pod nadzorom ili upute u vezi s korištenjem uređaja na siguran način i razumiju opasnosti koje su uključene.
• Djeca starija od 3 godine i mlađa od 8 godina ne smiju uključivati, regulirati i čistiti uređaj niti obavljati korisničko održavanje.
• OPREZ: Neki dijelovi ovog proizvoda mogu se jako zagrijati i uzrokovati opekotine. Posebnu pažnju treba posvetiti tamo gde su deca i ugrožena lica.
• Uređaj nije namijenjen za upotrebu od strane osoba (uključujući djecu) sa smanjenim fizičkim, senzornim ili mentalnim sposobnostima ili nedostatkom iskustva i znanja, osim ako su pod nadzorom ili upute o korištenju uređaja od strane osobe odgovorne za njihovu sigurnost.
• Ne prekrivajte grijač. Može doći do pregrijavanja ako je grijač prekriven.
• Ensure the power cord is not damaged and is placed away from heat sources.
• Ovaj grijač je dizajniran samo za upotrebu u zatvorenom prostoru.

2. Proizvod je gotovview

The CREATE Warm Clear 2000W is a wall-mounted electric convector heater designed for rapid and efficient heating of spaces up to 20m². It features an X-shaped aluminum heating element, WiFi connectivity for app control, open window detection, and IP24 protection for enhanced safety.

Slika 1: Front view of the CREATE Warm Clear 2000W Electric Convector Heater. This image shows the sleek, white rectangular design of the heater, with the CREATE logo at the bottom and a small control panel visible on the right side.

3. Postavljanje i instalacija

3.1 Raspakivanje

• Pažljivo izvadite grijač iz ambalaže.
• Provjerite ima li znakova oštećenja. Ako je oštećeno, nemojte koristiti i kontaktirajte korisničku podršku.
• Ensure all components are present before discarding packaging materials.

3.2 Montaža na zid

This heater is designed for wall-mounted installation. Ensure the chosen location is a flat, stable surface and allows for proper air circulation around the unit. Maintain minimum distances from walls and other objects as specified in the diagram below.

Slika 2: Dimensions and mounting clearances for the heater. The diagram illustrates the heater's height (995 mm), width (530 mm), and depth (82 mm), along with recommended clearances for safe installation.

1. Mark the desired mounting points on the wall according to the provided template or dimensions. Ensure the points are level.
2. Izbušite rupe na označenim mjestima i umetnite odgovarajuće tiplove (ako je potrebno, ovisno o materijalu zida).
3. Pričvrstite montažni držač na zid pomoću vijaka.
4. Carefully hang the convector heater onto the mounting bracket, ensuring it is securely seated.
5. Ensure the heater is firmly attached to the wall and cannot be easily dislodged.

Slika 3: The CREATE Warm Clear 2000W heater installed on a wall in a living space. This image demonstrates the heater's discreet integration into a room's decor when wall-mounted.

3.3 Priključak za napajanje

Once mounted, plug the heater into a suitable 240V electrical outlet. Ensure the outlet is easily accessible and not overloaded.

4. Uputstvo za upotrebu

4.1 Kontrolna tabla prekoview

The heater can be operated using the integrated control panel located on the side of the unit or via the CREATE app.

Slika 4: Close-up view of the heater's control panel. This image highlights the buttons for power, mode selection, temperature adjustment (+/-), and timer settings.

• Dugme za napajanje (⏻): Uključuje ili isključuje grijač.
• Mode Button (☰): Cycles through different heating modes (e.g., Comfort, Eco, Anti-freeze).
• Porast temperature (+): Povećava ciljanu temperaturu.
• Pad temperature (-): Smanjuje ciljanu temperaturu.
• Dugme tajmera (⏱): Sets or adjusts the operating timer.

4.2 Osnovni rad

1. Press the Power Button (⏻) to turn the heater ON. The display will show the current room temperature.
2. Use the Temperature Up (+) and Temperature Down (-) buttons to set your desired temperature. The heater will automatically adjust its output to reach and maintain this temperature.
3. Press the Mode Button (☰) to select a heating mode. Refer to the display for the active mode.
4. To turn the heater OFF, press the Power Button (⏻) again.

4.3 WiFi povezivost i upravljanje putem aplikacije

The CREATE Warm Clear 2000W can be controlled remotely via the CREATE app on your smartphone.

1. Download the 'CREATE' app from your smartphone's app store (iOS or Android).
2. Registrujte se za račun ili se prijavite ako ga već imate.
3. Follow the in-app instructions to add your new heater. This typically involves putting the heater into pairing mode (refer to the heater's display or specific app instructions) and connecting it to your home WiFi network.
4. Once connected, you can control the heater's power, temperature, modes, and set schedules from anywhere.

Slika 5: A user interacting with the CREATE app on a smartphone to control the convector heater. The app interface shows temperature settings and control options.

4.4 Otvorite otkrivanje prozora

This feature helps save energy. If the heater detects a sudden drop in room temperature, indicating an open window or door, it will automatically pause heating to prevent energy waste. Heating will resume once the temperature stabilizes or the window/door is closed.

4.5 Zaštita od pregrijavanja

The heater is equipped with an internal safety device that automatically switches off the unit in case of overheating. If this occurs, unplug the heater, allow it to cool down, and check for any obstructions to the air inlets or outlets before restarting.

5. Održavanje

5.1 Čišćenje

• Uvijek isključite grijalicu iz struje i ostavite je da se potpuno ohladi prije čišćenja.
• Obrišite vanjske površine mekom krpom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Ne uranjajte grijač u vodu i ne dozvolite da voda kaplje u unutrašnjost.
• Regularly clean the air inlets and outlets with a soft brush or vacuum cleaner to prevent dust buildup.

5.2 Skladištenje

If storing the heater for an extended period, ensure it is clean and dry. Store it in its original packaging in a cool, dry place, away from direct sunlight and moisture.

6. Otkrivanje problema

If you experience issues with your heater, please consult the following table before contacting customer support.

7. Specifikacije

8. Garancija i podrška

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact CREATE customer service through their official webweb-mjestu ili prodavaču gdje je proizvod kupljen.