Ansmann 1001-0143

ANSMANN BC 6-12V/2A Smart Charger Instruction Manual

1. Uvod

The ANSMANN BC 6-12V/2A Smart Charger is an intelligent, automatic 8-stage battery charger designed for safe and efficient charging of various 6V and 12V batteries. It is suitable for lead-acid, lead-gel, lead-fleece, and 12V LiFePO4 batteries with capacities ranging from 4 Ah to 60 Ah. This charger ensures optimal battery performance and extends battery life through its advanced charging process and comprehensive safety features.

Uključeno u kutiju:

2. Podešavanje i povezivanje

Before connecting the charger, ensure the charger is unplugged from the mains power supply. Select the appropriate connection method for your battery: battery clamps for temporary connection or ring terminals for a more permanent installation.

Koraci povezivanja:

  1. Connect the red positive (+) charger cable to the positive (+) terminal of the battery.
  2. Connect the black negative (-) charger cable to the negative (-) terminal of the battery.
  3. Uvjerite se da su sve veze sigurne.
  4. Plug the charger into a suitable mains power outlet. The charger will automatically begin its initial checks.
ANSMANN BC 6-12V/2A Smart Charger with battery clamps, ring terminals, and power cable

Figure 1: ANSMANN Smart Charger with included accessories for various connection types.

Person connecting the ANSMANN charger to a car battery

Slika 2: Prample of connecting the charger to a car battery using battery clamps.

ANSMANN charger connected to a motorcycle battery

Slika 3: Prample of connecting the charger to a motorcycle battery.

3. Uputstvo za upotrebu

The charger features an 8-stage fully automatic intelligent charging process. Use the 'MODE' button to select the appropriate charging program and current for your battery.

Selecting Charging Programs:

Pritisnite MODE button to cycle through the available charging programs:

For each program, you can select a charging current of either 1A or 2A. The LCD display will indicate the selected mode and charging status.

8-Stage Automatic Charging Process:

The charger automatically progresses through the following stages to optimize battery charging and maintenance:

  1. Provjera baterije: Assesses the battery's initial status and voltage.
  2. Desulfacija: Applies pulsed current and voltage to break down sulfate crystals on lead plates, restoring battery capacity.
  3. analiza: Temporarily halts charging to measure the battery's no-load voltage.
  4. Reactivation Charge: Prepares the battery for the main charge, resuming desulfation if necessary.
  5. Main Charge: Charges the battery with a constant current until it reaches a high state of charge.
  6. Charge Optimization: Gradually reduces the charging current to achieve maximum battery capacity.
  7. Voltage Kontrola: Monitors the battery's charge status to ensure optimal voltage nivoe.
  8. Holding Charge (Maintenance): Provides pulse maintenance charging as needed to prevent self-discharge and keep the battery fully charged.
Dijagram koji ilustruje broj 8tage charging process of the ANSMANN charger

Slika 4: Vizuelni prikaz 8-stagautomatski proces punjenja.

4. Održavanje

The ANSMANN BC 6-12V/2A Smart Charger is designed for durability and minimal maintenance. It is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This allows for safe use in various environments.

The charger can remain connected to the battery for extended periods, providing a continuous holding charge to prevent self-discharge. This feature is ideal for vehicles stored for long durations, ensuring the battery remains fully charged and ready for use.

Periodically inspect the charger cables and connectors for any signs of damage or wear. Keep the charger clean and free from excessive dust or debris.

5. Troubleshooting and Safety Features

The ANSMANN Smart Charger incorporates multiple safety features to protect both the user and the battery during operation. If an issue occurs, the charger's LCD display may indicate an error or the charging process may not initiate.

Sigurnosne karakteristike:

ANSMANN charger in a wet environment, illustrating protection features

Figure 5: The charger's robust design and protection features, including splash water resistance.

ANSMANN charger connected to various battery types, highlighting defect detection

Figure 6: The charger's universal compatibility and defect detection capability.

Uobičajeni problemi i rješenja:

6. Specifikacije

FeatureSpecifikacija
Broj modela1001-0143
Ulazni voltageAC 100-240V, 50/60Hz
Output Voltage6V / 12V (jednosmjerna struja)
Charging Current1A / 2A (odabirljivo)
Kapacitet baterije4 Ah - 60 Ah
Vrste baterijaLead-Acid, Lead-Gel, Lead-Fleece, 12V LiFePO4
Punjenje Stages8-Stage Automatski
Ocjena zaštiteIP65 (Dust and Splash Water Protected)
Dimenzije proizvoda7.09 x 3.11 x 1.93 inča (180 x 79 x 49 mm)
Težina artikla1.03 funte (0.47 kg)

7. Garancija

The ANSMANN BC 6-12V/2A Smart Charger comes with a 3-godišnja garancija proizvođača from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.

8. Podrška

For further assistance, technical support, or warranty inquiries, please contact ANSMANN customer service. You can find contact information on the official ANSMANN webweb-mjestu ili putem vašeg prodavača.

For more information about ANSMANN products, visit the Ansmann Store on Amazon.