Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Blaupunkt AMP-1501PRO monoblock ampspašivač. Molimo vas da pažljivo pročitate ovaj priručnik prije nego što pokušate instalaciju ili upotrebu kako biste osigurali pravilnu upotrebu i spriječili oštećenje uređaja ili audio sistema vašeg vozila. Sačuvajte ovaj priručnik za buduću upotrebu.
Sigurnosne informacije
- Uvijek isključite negativni pol akumulatora vozila prije početka bilo kakvih električnih radova.
- Osigurajte da su sve žice pravilno postavljene i osigurane kako biste spriječili njihovo priklještenje ili oštećenje.
- Koristite ožičenje odgovarajućeg presjeka za napajanje i uzemljenje kako je navedeno u odjeljku o instalaciji.
- Instalirajte amplifier in a dry, well-ventilated location, away from direct sunlight or heat sources.
- Nemojte izlagati ampučvršćivač na vlagu ili ekstremne temperature.
- Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom profesionalnom instalateru.
Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- Blaupunkt AMP-1501PRO Monoblock Amplifier
- Remote Bass Level Control Knob
- Montažni vijci
- Uputstvo za upotrebu
Image showing the Blaupunkt AMP-1501PRO amplifier's included accessories: a remote bass level control, the instruction manual, and a set of mounting screws.
Karakteristike proizvoda
- Snažan izlaz: Delivers up to 1500W peak power.
- Klasa D Amposvježenje: High-efficiency design minimizes heat generation, allowing for a compact form factor.
- Niskopropusni filter (LPF): Adjustable from 40Hz to 180Hz for precise subwoofer integration.
- Kompaktan dizajn: Facilitates flexible installation in various vehicle locations, including under seats or in trunks.
- 2 Ohm Stabilan: Capable of driving subwoofers with 2-ohm impedance for increased power output.
Top view Blaupunkta AMP-1501PRO amplifier, highlighting its compact design and branding.
Postavljanje i instalacija
Montaža Amplifier
Odaberite mjesto za montažu koje je suho, dobro prozračeno i sigurno. Izbjegavajte montažu amplifier directly on carpet or in enclosed spaces that restrict airflow. Use the provided mounting screws to secure the ampčvrsto pričvrstite podizač na čvrstu površinu u vašem vozilu.
Ožičenje
Ensure all connections are tight and secure to prevent electrical shorts or poor performance.
Pozadi view of the amplifier, detailing the power input terminals (GND, REM, +12V), fuse holders, and speaker output terminals.
- Priključak za napajanje (+12V): Connect a direct wire from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Use an appropriate gauge power wire (e.g., 8-gauge or 4-gauge depending on total system power) and install an in-line fuse holder within 18 inches of the battery.
- Uzemljenje (GND): Connect a wire of the same gauge as the power wire from the GND terminal on the ampPričvrstite gornji dio na čistu, neobojenu metalnu površinu na šasiji vozila. Osigurajte dobru električnu vezu.
- Daljinsko uključivanje (REM): Connect a thin wire (e.g., 18-gauge) from the REM terminal on the amplifier to the remote turn-on output of your head unit. This wire turns the ampuključivanje i isključivanje plamenika pomoću stereo uređaja u automobilu.
- Izlaz zvučnika: Connect your subwoofer(s) to the SPEAKER OUTPUT terminals. Ensure correct polarity (+ to + and - to -). This amplifier is designed for monoblock operation, typically driving a single subwoofer or multiple subwoofers wired to a compatible impedance (e.g., 2 ohms).
Front view of the amplifier, displaying the RCA input jacks, GAIN, BASS BOOST, and LPF adjustment knobs, along with the remote bass knob port.
- RCA Input (INPUT R/L): Connect RCA cables from your head unit's subwoofer or full-range pre-outs to the INPUT R and L jacks on the amplifier.
- Daljinsko dugme za bas: Connect the remote bass level control knob to the 'REMOTE' port on the amplifier using the provided cable. Mount the knob in an accessible location for easy adjustment.
Uputstvo za upotrebu
Početno napajanje
After all connections are made, reconnect the vehicle's negative battery terminal. Turn on your car stereo. The 'PWR' indicator on the amplifier should illuminate, indicating it is receiving power and operating correctly. If the 'PRT' (Protection) indicator illuminates, refer to the Troubleshooting section.
Prilagođavanje kontrola
- DOBITAK: Ova kontrola odgovara amplifier's input sensitivity to the output level of your head unit. Start with the GAIN set to minimum (0.1V) and slowly increase it until you hear distortion, then back off slightly. Do not use the GAIN control as a volume knob.
- BASS BOOST: This control provides an adjustable bass enhancement at a specific frequency. Use sparingly to avoid distortion or damage to your speakers.
- LPF (niskopropusni filter): This filter allows only frequencies below the set point to pass through to the subwoofer. Adjust the LPF (40Hz - 180Hz) to blend the subwoofer's output seamlessly with your main speakers. A common starting point is around 80Hz.
- REMOTE (Bass Knob): The remote bass knob provides convenient control over the subwoofer's output level from the driver's seat.
Održavanje
- Povremeno provjeravajte sve spojeve ožičenja na čvrstoću i prisustvo korozije.
- Zadrži ampČistite uređaj, bez prašine i ostataka. Za čišćenje koristite meku, suhu krpu.
- Ensure that the cooling fins are not obstructed to maintain proper heat dissipation.
- Nemojte koristiti jake hemikalije ili rastvarače za čišćenje.
Rješavanje problema
Ako imate problema sa svojim ampspasilac, pogledajte sljedeće uobičajene probleme i rješenja:
- No Power (PWR indicator off):
- Check the in-line fuse near the battery and the fuses on the ampZamijenite ako je pregorio.
- Verify +12V power, ground, and remote turn-on connections.
- Protection Mode (PRT indicator on):
- This indicates a fault condition (e.g., short circuit, overheating, low voltagi).
- Provjerite ožičenje zvučnika na kratke spojeve.
- Osigurajte odgovarajuću ventilaciju oko amplifier.
- Verify vehicle battery voltage.
- Nema zvuka:
- Check RCA input connections from the head unit.
- Provjerite spojeve i polaritet zvučnika.
- Ensure head unit volume is up and source is selected correctly.
- izobličeni zvuk:
- Adjust the GAIN control to prevent clipping.
- Provjerite kompatibilnost impedanse zvučnika.
- Reduce BASS BOOST if it's causing distortion.
Specifikacije
| Feature | Specifikacija |
|---|---|
| Broj modela | AMP-1501PRO |
| Vršna izlazna snaga | 1500W |
| Amplifier Class | Klasa D |
| Stabilnost impedancije | 2 Ohm Stabilno |
| Niskopropusni filter (LPF) | 40Hz - 180Hz |
| Dimenzije pakovanja (D x Š x V) | 11.14 x 8.39 x 2.99 inča |
| Težina artikla | 4.18 funte |
Informacije o garanciji
Blaupunkt AMP-1501PRO amplifier comes with a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, neglect, or unauthorized modification. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the warranty card included in your package or visit the official Blaupunkt website.
Podrška i kontakt
For technical assistance, troubleshooting, or warranty inquiries, please visit the official Blaupunkt website or contact their customer support. Ensure you have your product model number (AMP-1501PRO) and proof of purchase available when seeking support.
Webstranica: www.blaupunkt.com
