BWT Cosmy The Bot 250 robotski čistač bazena - uputstvo za upotrebu

1. Uvod

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Sigurnosne informacije

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste smanjili rizik od ozljeda ili oštećenja:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Keep children and pets away from the pool area when the cleaner is in operation.
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Ne koristite čistač ako se u bazenu nalaze ljudi.
• Ensure the cleaner is fully submerged before starting operation.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Komponente proizvoda

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Glavna jedinica: The robotic cleaner body, housing the motor and filtration system.
• Korpa filtera: Removable basket for collecting debris.
• Brushes/Rollers: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• Jedinica za napajanje: Converts AC power to safe DC power for the cleaner.

Slika 3.1: Prednja strana view of the cleaner, highlighting the cleaning brushes and intake area.

Slika 3.2: Donja strana view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

Slika 3.3: Unutrašnje view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Podešavanje

1. Raspakujte čistač: Carefully remove the cleaner and all accessories from the packaging.
2. Spojite plutajući kabel: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Mjesto u bazenu: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Priključak: Uključite jedinicu za napajanje u uzemljenu električnu utičnicu.

5. Uputstvo za upotrebu

1. Započnite ciklus čišćenja: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Podesite snagu usisavanja: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Čišćenje monitora: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Ukloni iz bazena: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Održavanje

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

6.1. Čišćenje filter korpe

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Isključite napajanje: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Otvorite odjeljak filtera: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Remove Filter Basket: Grasp the handle of the filter basket and lift it out of the cleaner.
4. Filter za ispiranje: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Reinsert Filter: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Zatvori poklopac: Close the filter compartment lid securely.

Slika 6.1: Vrh view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Opće čišćenje i skladištenje

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Čistač čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Coil the floating cable loosely to prevent kinks or damage.

7. Otkrivanje problema

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se korisničkoj podršci.

8. Specifikacije

9. Garancija i podrška

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

Proizvođač: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.