EPEVER Tracer6415AN MPPT Solar Charge Controller 60A User Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of your EPEVER Tracer6415AN MPPT Solar Charge Controller. The Tracer-AN series is designed for advanced solar power systems, offering high efficiency and comprehensive protection features. This 60A model supports various battery voltages and can manage up to 3000W of solar panel input for 48V systems.

Ključne karakteristike:

• Advanced Maximum Power Point Tracking (MPPT) technology with tracking efficiency ≥99.5%.
• High conversion efficiency >98.6%.
• Automatic detection for 12V/24V/36V/48V battery systems.
• Support for Sealed, Gel, AGM, Flooded, and Lithium battery types.
• Real-time energy statistics and LCD display for operational data.
• Višestruki načini kontrole opterećenja.
• Comprehensive electronic protection against overcharge, over-discharge, overload, short circuit, reverse polarity, and overheating.
• Negative ground design.

2. Sigurnosna uputstva

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in serious injury, damage to the controller, or damage to other components of the system.

• Osigurajte da su sve žice pravilno polarizirane i sigurno spojene.
• Do not attempt to repair or modify the controller. Refer to qualified service personnel.
• Kontroler postavite u dobro prozračeno područje, dalje od zapaljivih materijala.
• Disconnect all power sources (solar panel and battery) before installing or servicing the controller.
• Koristite odgovarajuće prekidače ili osigurače za sve priključke.
• Nosite zaštitu za oči pri radu s baterijama.
• Osigurajte napunjenost baterijetage je unutar radnog raspona kontrolera.

3. Komponente i karakteristike proizvoda

Familiarize yourself with the various parts and connections of the Tracer6415AN controller.

Slika 3.1: Prednja i bočna strana View of the Tracer6415AN Controller with Labeled Components.

This image displays the EPEVER Tracer6415AN MPPT Solar Charge Controller, highlighting its key features and connection points. The left panel shows the front view with the LCD display and control buttons. The right panel provides a detailed perspective of the connection terminals and ports, including PV terminals, battery terminals, load control relay, RS485 port, RTS port, and grounding terminal. The image also points out the fuse, generator relay ON/OFF, and PV reverse polarity alarm indicator.

Slika 3.2: Product Features and Characteristics Overview.

This image provides a visual breakdown of the Tracer6415AN's external features and internal characteristics. The left side details the various terminals and ports: Battery Terminals, PV Terminals, Load control relay, RBVS Port, Generator relay ON/OFF, RS485 port, RTS Port, Generator and load relay enable, Fuse, Grounding Terminal, and PV reverse polarity alarm indicator. The right side illustrates the overall characteristics, emphasizing the aluminum alloy material for good heat dissipation and showing the LCD display interface.

Identifikacija komponente:

1. LED indikator punjenja
2. Dugme SELECT
3. Osigurač
4. Terminal za uzemljenje
5. LED indikator greške
6. LCD
7. Tipka ENTER
8. RBVS port
9. Relej komunalnog/generatorskog uređaja UKLJUČEN
10. RS485 port (5V/DC200mA)
11. RTS Port
12. Omogućavanje generatora i releja opterećenja
13. Indikator alarma za obrnuti polaritet PV-a
14. Relej za kontrolu opterećenja
15. Relej komunalnih usluga/generatora ISKLJUČEN
16. PV terminali
17. Terminali za baterije

4. Instalacija i ožičenje

Pravilna instalacija je ključna za siguran i efikasan rad vašeg solarnog regulatora punjenja. Pažljivo slijedite ove korake.

4.1 Montaža kontrolera

• Choose a suitable mounting location that is dry, well-ventilated, and protected from direct sunlight and moisture.
• Ensure there is sufficient clearance around the controller for proper heat dissipation.
• Montirajte kontroler vertikalno na nezapaljivu površinu koristeći odgovarajuće pričvršćivače.

4.2 Dijagram ožičenja

The following diagram illustrates a typical wiring setup for the Tracer6415AN controller in a solar power system.

Slika 4.1: Typical Wiring Diagram for a Solar System with Tracer6415AN.

This image presents a comprehensive wiring diagram for integrating the EPEVER Tracer6415AN MPPT Solar Charge Controller into a solar power system. It shows connections from the solar panel to the controller, from the controller to the battery bank (two batteries shown), and from the battery bank to an inverter, which then powers various AC loads like a TV, computer, and washing machine. Additionally, DC loads such as a fan and speaker are shown connected directly to the controller's load terminals. The left side of the image also illustrates the controller's intelligent charging protection features, including temperature compensation, overcharging protection, over-discharging protection, short-circuit protection, PV reverse polarity protection, and current/power-limiting protection.

4.3 Connection Sequence

Follow this sequence to connect the components to the controller:

1. Spojite bateriju: Connect the battery to the controller's battery terminals. Ensure correct polarity. The controller will automatically detect the battery voltage (12V/24V/36V/48V).
2. Spojite solarni panel: Spojite solarni panel na PV terminale kontrolera. Osigurajte ispravan polaritet.
3. Spojite opterećenje (opciono): Connect DC loads to the controller's load terminals. Ensure correct polarity.
4. uzemljenje: Connect the grounding terminal to an earth ground.

Upozorenje: Always connect the battery first and disconnect the battery last. Incorrect connection order may damage the controller.

5. Uputstvo za upotrebu

The Tracer6415AN features an LCD display and control buttons for monitoring and configuration.

5.1 LCD zaslon

The LCD displays real-time operating data, including battery voltage, PV voltage, charging current, load current, and system status. Use the "SELECT" and "ENTER" buttons to navigate through the display menus and adjust settings.

5.2 Odabir tipa baterije

The controller supports various battery types. You can select the appropriate battery type (Sealed, Gel, AGM, Flooded, Lithium, or User-defined) through the controller's menu. For 36V systems, the battery type needs to be adjusted manually.

5.3 Režimi kontrole opterećenja

The controller offers multiple load control modes, allowing you to manage when your DC loads receive power. Refer to the detailed manual for specific programming instructions for each mode.

6. Zaštitne karakteristike

The Tracer6415AN is equipped with comprehensive electronic protection functions to ensure system safety and longevity.

• PV Over Current Protection: Sprečava oštećenja od prekomjerne struje iz solarnog panela.
• Zaštita od kratkog spoja fotonaponskog sistema: Protects against short circuits in the solar array.
• Zaštita od obrnutog polariteta PV-a: Sprečava oštećenje ako se obrne polaritet solarnog panela.
• Zaštita od prepunjavanja baterije: Stops charging when the battery reaches its full charge voltage.
• Zaštita od prekomjernog pražnjenja baterije: Isključuje opterećenje kada se baterija ispraznitage drops too low, preventing deep discharge.
• Zaštita od obrnutog polariteta baterije: Štiti od nepravilnog spajanja baterije.
• Zaštita od preopterećenja: Disconnects the load if current exceeds the rated value.
• Zaštita od kratkog spoja pri opterećenju: Protects against short circuits in the load circuit.
• Zaštita od pregrijavanja kontrolera: Reduces charging current or disconnects if the controller temperature becomes too high.

7. Specifikacije

8. Održavanje

Regular maintenance ensures optimal performance and extends the lifespan of your charge controller.

• Provjerite veze: Povremeno provjeravajte sve spojeve ožičenja na čvrstoću i prisustvo korozije.
• Očistite kontroler: Održavajte kontroler čistim i bez prašine i ostataka. Pazite da ventilacijski otvori nisu blokirani.
• Pregledajte ima li oštećenja: Provjerite ima li fizičkih oštećenja na casing, kablove ili terminale.
• Performanse monitora: Regularly check the LCD display for normal operation and any error codes.

9. Otkrivanje problema

Ovaj odjeljak pruža rješenja za uobičajene probleme s kojima se možete susresti.

10. Videozapisi proizvoda

Pogledajte ove službene videozapise proizvoda za dodatne upute i vizualne demonstracije.

11. Garancija i podrška

EPEVER proizvodi su dizajnirani za pouzdanost i performanse. Za informacije o garanciji, tehničku podršku ili upite o servisiranju, obratite se službenom EPEVER-ovom webstranicu ili kontaktirajte ovlaštenog prodavača.

Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.