Sorandy Industrial RS485 High Temperature and Humidity Sensor Transmitter User Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Sorandy Industrial Grade High Temperature and Humidity Sensor Transmitter. This device is designed for reliable and accurate measurement of temperature and humidity in various industrial environments, utilizing an RS485 output for data transmission.

2. Značajke proizvoda

• Advanced Sensing: Employs an excellent digital integrated sensor with a reliable digital processing circuit for precise environmental monitoring.
• stabilan izlaz: Features a full digital conditioning circuit, providing a stable RS485 current output for reliable monitoring.
• Robustan dizajn: IP68 multi-layer waterproof protection and 45-degree angle impact resistance ensure durability in harsh conditions.
• Uklonjivi filter: Includes a removable anti-blocking design for easy maintenance.
• Široka primjena: Suitable for weather stations, data detection, outdoor greenhouses, storage warehouses, and building automation systems.

3. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• 1 x Sorandy Temperature Humidity Sensor Transmitter
• 2 x Vijci za montažu
• 2 x zidni čepovi
• 1 x Card Pin (for configuration access, if applicable)
• 2 x Additional Accessories (e.g., washers, gaskets)

Image: Sensor Transmitter and Accessories

4. Postavljanje i instalacija

Follow these steps for proper installation of your sensor transmitter:

4.1 Montaža

The sensor can be mounted using the provided screws and wall plugs. Choose a location that accurately represents the environment to be measured, away from direct heat sources, ventilation outlets, or areas with stagnant air. Ensure the sensor tip is exposed to the ambient conditions.

Slika: Ukupno view of the sensor transmitter

4.2 Ožičenje

The sensor transmitter uses an RS485 interface for communication and requires a 12V-36V DC power supply. Connect the wires according to the following specifications:

• crvena žica: Power supply (12-36V DC positive)
• žuta žica: RS485+ (Data A)
• Bijela žica: RS485- (Data B)
• crna žica: Negativno (uzemljeno)

Image: Wiring connections at the sensor base

Ensure all connections are secure and properly insulated to prevent short circuits or damage.

5. Principi rada

The Sorandy sensor transmitter converts environmental temperature and humidity into corresponding numerical data using an integrated digital sensor. This data is then processed by a full digital conditioning circuit and transmitted via the RS485 interface. The RS485 protocol allows for robust and long-distance communication, making it suitable for industrial applications.

6. Specifikacije

Image: Sensor Transmitter Dimensions

7. Održavanje

To ensure optimal performance and longevity of your sensor transmitter, consider the following maintenance guidelines:

• Redovno čišćenje: Periodically inspect the sensor tip for dust, debris, or moisture accumulation. Clean gently with a soft, dry cloth if necessary. Avoid using abrasive materials or harsh chemicals.
• Inspekcija filtera: The sensor features a removable anti-blocking design. Inspect the filter for any blockages and clean or replace it as needed to maintain accurate readings.
• Provjera veze: Regularly verify that all wiring connections are secure and free from corrosion or damage.
• Monitoring životne sredine: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent sensor damage.

8. Otkrivanje problema

If you encounter issues with your sensor transmitter, refer to the following common troubleshooting steps:

• No Power/No Reading:
  • Provjerite volumen napajanjatage (12V-36V DC) and ensure it is correctly connected to the red and black wires.
  • Provjerite je li izvor napajanja aktivan.
• Netačna očitanja:
  • Ensure the sensor tip is clean and free from obstructions.
  • Confirm the sensor is placed in an appropriate location, not affected by localized heat, cold, or moisture.
  • Provjerite ima li fizičkih oštećenja na senzoru ili kablu.
• Communication Errors (RS485):
  • Verify the RS485+ (Yellow) and RS485- (White) connections are correct and not swapped.
  • Check for proper termination resistors in the RS485 network, if applicable.
  • Ensure the communication parameters (baud rate, parity, data bits, stop bits) on your receiving device match the sensor's settings.
• Povremena očitanja:
  • Pregledajte sve ožičenje na labave spojeve ili oštećenja.
  • Check for sources of electromagnetic interference (EMI) near the sensor or wiring.

If problems persist after following these steps, please contact Sorandy customer support for further assistance.

9. Garancija i podrška

For information regarding product warranty, returns, or technical support, please refer to the purchase documentation or contact your vendor. You may also visit the official Sorandy Store za opšte informacije o proizvodu.