Uvod
The Schiit Midgard is a versatile headphone amplifier i preamp designed to deliver high-fidelity audio. It features a Halo topology mixed-mode feedback system, providing robust power output for a wide range of headphones. This manual provides essential information for setting up, operating, and maintaining your Midgard unit.
Figure 1: Schiit Midgard Headphone Amplifier i Preamp. This image displays the overall design of the unit, showcasing its matte black finish and compact form factor.
Setup
1. Raspakivanje i sadržaj
Carefully remove the Midgard unit from its packaging. Ensure all components are present:
- Schiit Midgard Headphone Amplifier i Preamp
- Power Cable
- Korisnički priručnik (ovaj dokument)
2. Prednja ploča prekoview
Figure 2: Front Panel. This image highlights the front panel of the Midgard, showing the volume knob, gain switches, and headphone output jacks.
- Gain Switches: Two switches for adjusting the gain level.
- Gumb za jačinu zvuka: Controls the output volume for headphones and preamp izlazi.
- 1/4" TRS Headphone Output: Standardni priključak za slušalice.
- 4-pin XLR Headphone Output: Balanced headphone jack for compatible headphones.
3. Priključci na stražnjoj ploči
Figure 3: Rear Panel Connections. This image illustrates the rear panel of the Midgard, detailing the various input and output ports, including balanced XLR and single-ended RCA connections, and the power input.
- Balansirani ulazi (XLR): Connect audio sources with balanced XLR outputs.
- Single-Ended Inputs (RCA): Connect audio sources with single-ended RCA outputs.
- Balanced Preamp Outputs (XLR): Priključite na napajanje amplifiers or active speakers with balanced XLR inputs.
- Single-Ended Preamp Outputs (RCA): Priključite na napajanje amplifiers or active speakers with single-ended RCA inputs.
- Ulaz za izmjeničnu struju: Connect the provided power cable. The unit operates on 115VAC only and is designed for use in the United States, Canada, and Mexico.
4. Povezivanje vašeg sistema
- Ensure the Midgard unit is powered off and unplugged.
- Connect your audio source (e.g., DAC, streamer) to the desired input on the rear panel (Balanced XLR or Single-Ended RCA).
- If using headphones, connect them to either the 1/4" TRS or 4-pin XLR output on the front panel.
- Ako koristite preamp function, connect the Balanced XLR or Single-Ended RCA preamp outputs to your power amplifier ili aktivni zvučnici.
- Connect the power cable to the AC Power Input on the rear panel, then plug it into a 115VAC wall outlet.
Uputstvo za upotrebu
1. Uključivanje / isključivanje napajanja
To power on the Midgard, ensure all connections are secure, then flip the power switch located on the rear panel. To power off, flip the switch back to the off position.
2. Podešavanje jačine zvuka
Rotate the large knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume. Start with the volume at its lowest setting before playing audio to prevent sudden loud sounds.
3. Selecting Gain Level
The Midgard features two gain levels. Use the gain switches on the front panel to select the appropriate gain for your headphones. Lower gain is suitable for sensitive headphones, while higher gain provides more power for less sensitive or high-impedance headphones.
4. Using as a Headphone Amplifier
Connect your headphones to either the 1/4" TRS or 4-pin XLR output. The Midgard delivers nearly 5W into 32 ohms, providing ample power for most headphones. Ensure your headphones are compatible with the selected output type.
5. Using as a Preamp
The Midgard can also function as a preamp. Connect its balanced or single-ended preamp izlazi na snagu amplifier or active speakers. The volume knob controls the output level for both headphones and preamp izlazi istovremeno.
Održavanje
To ensure the longevity and optimal performance of your Schiit Midgard, follow these maintenance guidelines:
- čišćenje: Za čišćenje vanjske strane uređaja koristite meku, suhu krpu. Izbjegavajte upotrebu tečnih sredstava za čišćenje ili rastvarača, jer mogu oštetiti završnu obradu ili unutrašnje komponente.
- ventilacija: Ensure the unit has adequate ventilation. Do not block the ventilation holes on the top or sides of the chassis.
- Okruženje: Operate the Midgard in a clean, dry environment, away from direct sunlight, excessive heat, moisture, or dust.
- Snaga: Always unplug the unit from the power outlet before cleaning or if it will be unused for an extended period.
Rješavanje problema
If you encounter issues with your Schiit Midgard, refer to the following common troubleshooting steps:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| No sound from headphones/preamp izlazi. |
|
|
| Izobličen ili loš kvalitet zvuka. |
|
|
| Jedinica se ne uključuje. |
|
|
If the problem persists after trying these steps, please contact Schiit Audio customer support for further assistance.
Specifikacije
| Feature | Detalj |
|---|---|
| Naziv modela | Midgard |
| Dimenzije (D x Š x V) | 9 x 6 x 1.5 inča |
| Težina artikla | 3 funte |
| Power Output (into 32 ohms) | Nearly 5W (4.8W specified) |
| Frekvencijski odziv | 20Hz-20kHz, +/-0.01dB |
| Impedansa | 2 Ohma |
| Priključak za slušalice | 6.35 mm Jack (1/4" TRS), 4-pin XLR |
| Interfejs ulaznog uređaja | Balanced XLR, Single-Ended RCA |
| Output Device Interface | Balanced XLR Preamp, Single-Ended RCA Preamp |
| Kompatibilnost napajanja | 115VAC only (USA, Canada, Mexico) |
| Materijal | Metal |
| Posebne karakteristike | Halo Topology, Dual Gain Levels, Made in Texas, USA |
Garancija i podrška
The Schiit Midgard Headphone Amplifier i Preamp comes with a standard manufacturer's warranty. For specific warranty terms, duration, and to register your product, please refer to the official Schiit Audio webstranicu ili direktno kontaktirajte njihovu korisničku podršku.
For technical support, service, or any questions not covered in this manual, please visit the Schiit Audio Store na Amazonu or the official Schiit Audio website.
