Daytech USR-1

Daytech Freezer Door Alarm (Model USR-1) Instruction Manual

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Daytech Freezer Door Alarm, Model USR-1. This device is designed to alert you when a refrigerator or freezer door is left open, helping to preserve food and save energy. Please read this manual thoroughly before using the product to ensure proper function and safety.

Product Overview

The Daytech Freezer Door Alarm consists of a main unit and a magnetic sensor. When the magnetic sensor is separated from the main unit (indicating an open door), the alarm will activate after a set delay. The device features adjustable volume and multiple delay modes.

Diagram of Daytech Freezer Door Alarm main unit and magnet, showing buzzer, LED indicator, Chime/Alarm/OFF switch, Volume control, and Work Mode Set Key.

Figure 1: Main Unit Components and Dimensions

Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

Video 1: Product Unboxing and Package Contents. This video demonstrates the items included in the package, such as the alarm units, user manual, and batteries.

Instalacija

The alarm can be installed on various types of refrigerators and freezers. Ensure the installation surface is clean and dry.

Koraci instalacije:

  1. Clean the desired installation area on your refrigerator or freezer door frame.
  2. Peel off the protective film from the double-sided adhesive tape on the back of the main unit and the magnet.
  3. Attach the main unit to the door frame and the magnet to the door, ensuring the triangular markings on both parts are aligned. The gap between the main unit and the magnet should be less than 0.98 inches (2.5 cm) when the door is closed.
  4. Press firmly for a few seconds to secure.
Step-by-step visual guide for installing the Daytech Freezer Door Alarm using adhesive pads on a refrigerator door.

Figure 2: Installation Process

Diagram showing various installation positions for the Daytech Freezer Door Alarm on different types of refrigerator and freezer doors, highlighting the importance of the adhesive contact area and gap requirements.

Figure 3: Recommended Installation Positions and Gap Requirements

Uputstvo za upotrebu

1. Ringtone and Mode Selection:

Use the 'Chime/Alarm/OFF' switch on the side of the main unit to select the desired sound mode:

2. Podešavanje jačine zvuka:

The alarm features 5 adjustable volume levels (0-120dB). Use the 'Volume' button on the side to cycle through the volume settings until you reach your preferred level.

Image showing the Daytech Freezer Door Alarm with an overlay indicating adjustable volume levels from 45dB to 120dB and a mute option.

Figure 4: Adjustable Volume Levels

3. Delay Mode Selection:

The alarm offers four delay modes, allowing you to choose how long the door can remain open before the alert sounds. Press the 'SET Key' button to cycle through the modes.

Video 2: Functional Adjustment Demonstration. This video illustrates how to switch between chime and alarm modes, adjust volume, and select different delay modes.

Radni režimi

The Daytech Freezer Door Alarm offers four distinct working modes, each with a different delay duration and alert pattern:

ModeDelay DurationAlert Pattern
Način rada 11 minute (60 seconds)Alarm/Chime sounds for 5 seconds every 15 seconds.
Način rada 22 minuta (120 sekundi)Alarm/Chime sounds for 10 seconds every 10 seconds.
Način rada 33 minuta (180 sekundi)Alarm/Chime sounds for 15 seconds every 5 seconds.
Način rada 44 minuta (240 sekundi)Alarm/Chime sounds for 20 seconds every 15 seconds.
Image illustrating the four working modes of the Daytech Freezer Door Alarm, detailing the delay duration and alert frequency for each mode.

Slika 5: Gotovoview of Working Modes

Zamjena baterije

The Daytech Freezer Door Alarm requires 2 AAA batteries. When the batteries are low, the alarm's performance may be affected. Replace batteries as follows:

  1. Slide the battery cover on the back of the main unit downwards to open.
  2. Uklonite stare AAA baterije.
  3. Umetnite dvije nove AAA baterije, pazeći na ispravan polaritet (+/-).
  4. Gurnite poklopac baterije na svoje mjesto dok ne škljocne sigurno.
Three-step visual guide demonstrating how to replace the batteries in the Daytech Freezer Door Alarm by sliding open the cover, inserting new AAA batteries, and closing the cover.

Figure 6: Battery Replacement Steps

Rješavanje problema

If you encounter issues with your Daytech Freezer Door Alarm, refer to the following troubleshooting guide:

ProblemMogući uzrokRješenje
Alarm does not sound when door is open.1. Device is OFF.
2. Baterije su slabe ili nepravilno instalirane.
3. Magnet and main unit are too far apart.
1. Ensure the 'Chime/Alarm/OFF' switch is set to Chime or Alarm mode.
2. Replace batteries and check polarity.
3. Re-position the main unit and magnet to ensure the gap is less than 0.98 inches (2.5 cm) when the door is closed.
Alarm sounds too frequently or falsely triggers.1. Magnet and main unit are too close or misaligned.
2. Delay mode is set too short.
1. Adjust the position of the magnet and main unit to ensure proper alignment and a slight gap when the door is closed.
2. Select a longer delay mode using the 'SET Key'.
Volume is too low or too high.Podešavanje jačine zvuka nije optimalno.Adjust the volume using the 'Volume' button on the side of the main unit.

Specifikacije

FeatureDetalj
Broj modelaUSR-1
Dimenzije3.9 x 1.6 x 0.86 inča (100 x 40 x 22 mm)
Težina artikla3.34 unce
Izvor napajanjaBattery Powered
Baterije su potrebne2 AAA baterije (uključene)
Vrsta baterijeAlkalna
Nivo bukeUp to 120 Decibels
Vrsta montažeDoor Mount
Senzorna tehnologijaKontakt senzor
Kompatibilni uređajiHome Security System (general)
BojaBijelo

Garancija i podrška

Daytech products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Daytech webSačuvajte račun kao dokaz o kupovini.